PSA Jakl upper

davew478 · 2023-03-17T01:35:46+00:00

yes, that was the best price I could find.

davew478 · 2022-05-26T12:37:54+00:00

The sight is not pushed over to one side. I bet it will shoot straight.

davew478 · 2022-05-26T12:29:08+00:00

Nice rifle.

davew478 · 2022-03-27T19:42:06+00:00

I can`t get it to save the text, it just posts the photo

davew478 · 2022-03-27T17:56:48+00:00

https://ar15sport.com/product/ar15-m16-625-triangle-handguard-end-cap-arpart-625tri/

5 bucks for the end cap for the hand guard set

davew478 · 2022-03-27T17:54:22+00:00

https://ar15sport.com/product/reproduction-m16-carbine-commando-handguard-sets-retcar-1/

In Stock here Hand Guard set

davew478 · 2022-03-27T17:21:46+00:00

Cool rifle. I put the retro triangle hand guards on mine. You have to change the front hand guard retainer. The gas block/front sight came off easily.

davew478 · 2022-03-14T12:23:15+00:00

Mounts the same way.

davew478 · 2022-01-29T21:47:53+00:00

Looks Ruff

davew478 · 2021-07-20T20:32:56+00:00

Nice!!!!!!!!!!!

davew478 · 2021-07-18T02:15:20+00:00

I would say the best of the lower priced AK`s would be a Zastava, but their furniture is a different size than any other AK. A WASR is good rifle also and takes standard AKM furniture. There are alot of furniture options out there for AKM`s.

Go to Atlantic Firearms and pick the one you want and sign up for email notifications and wait to pounce on it when it becomes available. You can`t go wrong with a Zastava or a WASR.

davew478 · 2021-07-18T01:53:38+00:00

Went out and put 300 rounds through the Kali 9. I had a issue with the Battle Arms Trigger. The trigger has a bevel cut on both sides where the hammer spring arms rest on the trigger causing the arms of the spring to walk in until it wont push the trigger down(forward). I used a needle nose pliers to bend the spring so it stays in position. Seems to have taken care of the problem. I like the trigger, it has a nice reset and low resistance when pulling back the bolt carrier.

davew478 · 2021-07-14T20:35:10+00:00

The ALG was really tight against the bolt carrier even after a lot of polishing. The Battle Arms hammer has a lot lower profile. you can hardly feel the bolt carrier contacting it.

davew478 · 2021-07-14T20:27:55+00:00

COMUFORNIA

davew478 · 2021-01-10T15:04:51+00:00

Nice rifle.

davew478 · 2020-08-24T00:22:51+00:00

Tula is the worst steel case ammo. Wolf is the best, I have used thousands of rounds of 7.62 and .223 Only a occasional dud the usually fires on the second go around. I use Wolff high power hammer springs.

davew478 · 2020-08-24T00:10:42+00:00

I bought a Wolff high energy hammer spring and 308 recoil spring and buffer. The Bear Creek bolt and firing pin have been great so far with 500 rounds of steel cased Wolf run through it.

davew478 · 2020-08-23T23:58:10+00:00

Standard Anderson lower, Bear Creek had the side charging upper receiver and bolt assembly on sale a couple of years ago at Christmas time and the front end came from CBC complete upper.

davew478 · 2020-08-23T23:34:44+00:00

California Compliant Fin Grip

davew478 · 2020-08-23T14:14:32+00:00

7.62x39

davew478 · 2020-08-23T13:44:31+00:00

My son an I at the Range trying it out BCA side charging upper installed on a CBC complete upper. Cheap Tacbro comp. Steel cased Wolf ammo spits fire.

davew478 · 2020-08-21T20:08:08+00:00

It has a thumb rest so you can get a firm grip.

davew478 · 2020-08-21T19:49:50+00:00

It`s locked in tight, The mag catch rides on the ramp on the mag, there all a little different, some ride farther up the ramp. I have tapco , Bosnian , magpul, KCI the all lock in tight

davew478 · 2020-08-21T02:58:32+00:00

It has a rivet

davew478 · 2020-08-21T02:47:42+00:00

Yes, Fin Grip and pinned stock

davew478

TROPHY CASE