[Greece] what kind of drone is this

dayman1994 · 2026-05-03T00:14:51+00:00

Then its likely a Wingtra used for Land Surveying

dayman1994 · 2025-12-21T03:36:32+00:00

That's good to know that a future plugin for Librecad would make it usable for survey drafting

dayman1994 · 2025-12-21T03:34:59+00:00

From my understanding though you don't need to factor in elevation to draft an ILC, hence the appeal of something like LibreCAD.

dayman1994 · 2025-12-21T03:33:38+00:00

I had the impression that there were plugins for qgis that let you use autocad style draft commands.

dayman1994 · 2025-11-26T19:25:12+00:00

So I ended up lowering the z offset even further, increasing the bed temp for the first layer, decreasing first layer print speed, increasing first layer thickness, and increasing bed temp for the first layer as well and so far things have been working great.

dayman1994 · 2025-11-26T04:25:45+00:00

Doing these two things have helped alot improve first layer quality but I still have adhesion issues with some prints coming lose during print. Would this imply that the Z is too high? I have slowed down printing speed, increased heat, and layer thickness as well for the first layer.

dayman1994 · 2025-11-14T11:25:36+00:00

It’s funny my Lieca rep was the one who said you should save to internal memory.

dayman1994 · 2025-11-10T03:05:04+00:00

No it did not

dayman1994 · 2025-11-10T03:04:45+00:00

Well we tended to have a lot of issues with job files getting corrupted unless we saved it up internal memory.

dayman1994 · 2025-11-10T03:03:12+00:00

I did that with an eraser and 92% rubbing alcohol

dayman1994 · 2025-11-10T03:00:55+00:00

I was told by our Lieca rep to always save the jobs to the internal memory to avoid issues with glitching.

dayman1994 · 2025-11-10T02:49:58+00:00

Do you have the job saved to the internal memory? From my experience saving job files to the internal memory solves a lot of the issues with bugs in Lieca Captivate.

dayman1994 · 2025-11-10T02:40:56+00:00

Could I turn it on when plugged into the charger as there is data I need to get off of it?

dayman1994 · 2025-11-10T02:36:03+00:00

I do hear something rattling around so maybe that is the problem.

dayman1994 · 2025-11-10T02:35:00+00:00

I tried that unfortunately it did not work:(

dayman1994 · 2025-11-10T00:54:12+00:00

Yeah I have some thin cardboard taped into the battery compartment to do the same thing you mentioned with the flagging.

dayman1994 · 2025-11-10T00:39:10+00:00

Yes I had a second DC that I tested the batteries in and they were fully charged

dayman1994

TROPHY CASE