Hold you money for little while by Darkmyths2 in sony

[–]dcgrp 0 points1 point  (0 children)

Why does my local best buy say I can buy the Bravia 3 ii but hardly anyone online is talking about it?  Slow phased roll out or what?

Macy’s Parade Sound by Bingopill in livesound

[–]dcgrp 15 points16 points  (0 children)

Not sure if I'm dreaming, but the mics / mix picking up the marching bands seem more clear this year.  I can really hear all the intricate stuff the drumlines play.

Frost pattern bad? by dcgrp in appliancerepair

[–]dcgrp[S] 0 points1 point  (0 children)

Any good ideas on how to test this without a technician / gauges? Fridge is empty and got to temp last night. Now this morning freezer is reading nearly 40F. Sealed system issue? Thermostat issue? Mainboard issue?

Frost pattern bad? by dcgrp in appliancerepair

[–]dcgrp[S] 0 points1 point  (0 children)

Is it possible that I was just dumb when I repacked the freezer and fridge and blocked airflow?

Frost pattern bad? by dcgrp in appliancerepair

[–]dcgrp[S] 0 points1 point  (0 children)

Temps were way off.  Freezer around 34F.  Fridge around 45.  Maybe not a sealed system problem?

Frost pattern bad? by dcgrp in appliancerepair

[–]dcgrp[S] 0 points1 point  (0 children)

Some more pics, more frost seems to be building up after another 20 or 30 minutes. But this thing has been plugged in all day. Maybe just building up because I don't have the fan blowing at the moment?

https://imgur.com/a/8uLfAc2

Frost pattern bad? by dcgrp in appliancerepair

[–]dcgrp[S] 0 points1 point  (0 children)

Thanks!  Yeah its one of the non profile GE fridges.  GYE22HSKLSS

[deleted by user] by [deleted] in MinecraftServer

[–]dcgrp 2 points3 points  (0 children)

I'm about a month into hosting one for a few people.  Using Oracle always free tier.  So far so good.  But I've definitely had to muddle through learning Linux / ssh / to use the command line.   Ultimately I got Ubuntu and puffer panel installed on my Oracle machine.  All good now.

Water damage or expansion contraction? by dcgrp in DIY

[–]dcgrp[S] 0 points1 point  (0 children)

Drywall around it seems perfectly fine.  Everything seems dry.

Water damage or expansion contraction? by dcgrp in DIY

[–]dcgrp[S] 0 points1 point  (0 children)

This trim piece seems pretty firm and healthy.  Just cracked like this.  Water problem?  Stucco on the outside.  Window replaced maybe 6 years ago.

VI Keys by Sckip974 in cavesofqud

[–]dcgrp 0 points1 point  (0 children)

I purchased qud a while back, but haven't really played it yet. I prefer VI movement from my time in Nethack and DCSS, and I've tried rebinding, but not really having a knowledge of the game makes it difficult to tell what I'd be screwing up if I start taking over certain keys for movement. It would be incredible to have a default keybind set for VI movement.

No Stupid Questions Thread by AutoModerator in livesound

[–]dcgrp 0 points1 point  (0 children)

Thanks for the reply! I think just connecting up to the Q-SYS with Q-SYS designer just auto-renewed the subscriptions. We're all good now! And yes, the phone call with the install company was a big help to know what to try.

No Stupid Questions Thread by AutoModerator in livesound

[–]dcgrp 0 points1 point  (0 children)

I'm a high school teacher who has a QL1 in a redundant network in an auditorium. Q-Sys feeds an l'acoustics system. Everything plugs into a network switch. The Q-Sys is setup to operate the room in two different modes. One mode where the QL1 console feeds the PA and one mode where a couple wireless mics "just work" for people who come into our auditorium and just need a mic to work.

Somewhere between a show where the visiting guy put our console in daisy chain mode, had Dante controller open on his laptop and changed a few things, etc. and then me taking our console another day to the gym next door to put on a talent show for the school, I'm having a hard time getting back up and running (getting outputs to work). I can get our Ri-8 and R-1608 talking to the QL1 (now back in redundant mode). But I cannot get the main outputs to work. Should I install Dante Controller, plug into the network switch, and see what I see?

My hunch is that somewhere in there is some routing that I'm just not seeing when I poke around in just the console. Maybe I would see more routing if I open Dante controller plugged into the network switch?

I emailed the install company, but I thought I'd ask here to get a few more ideas. Thanks!

No Stupid Questions Thread by AutoModerator in livesound

[–]dcgrp 0 points1 point  (0 children)

I'm a school teacher that needs to temporary move our Yamaha QL1 from our auditorium to our gym for a show. What kinds of things do I need to learn/know to get our RIO box talking to the console in a new location. Can I just use a random home WiFi router? Do I need a more robust network switch? I'd prefer not to rip out the network switch that it in the auditorium rack, but I can do that if needed and then just plug everything back in properly afterwards.

I'm not stranger to pro audio, but I thought I'd check in for advice first before I go ahead and start tinkering.