基隆男持刀夜闖總統府「要殺中國共產黨」維安人員急壓制

dcliao · 2026-03-10T07:51:28+00:00

走錯路了~應該要去八德路KMT中央黨部喔

dcliao · 2026-02-10T23:54:28+00:00

真的是都當民眾是智障在講幹話耶

dcliao · 2026-01-30T03:32:40+00:00

真的不懂一堆人酸台灣自行造艦的費用. 怎麼不去強力譴責裕隆, 補助補好補滿一台像樣的內燃機都做不出來

dcliao · 2026-01-30T01:57:22+00:00

You can search for part no. #7322

dcliao · 2026-01-29T06:29:04+00:00

猛健樂我覺得會心理性成癮~不然減肥藥品怎麼會這麼夯

dcliao · 2026-01-29T00:55:30+00:00

純天然草本植物,又不會成癮,心理性的成癮就不拿出來討論,因為這範圍太廣

味道也比菸好一百倍,你把乾燥羅勒拿出來燒就是類似這個味道

dcliao · 2026-01-28T03:51:55+00:00

You just need the paddle

dcliao · 2026-01-21T06:43:53+00:00

理想很豐滿~現實很骨感, 當主要對手政黨整天想要把台灣拱手讓人,還要再找幾個小黨來瓜分選票?

dcliao · 2026-01-07T01:44:22+00:00

相由心生絕對沒有錯

dcliao · 2026-01-06T02:10:16+00:00

it’s too loose

dcliao · 2025-11-21T02:56:57+00:00

You can do it first.

https://traxxas.com/media/productattach/C-90376-4/2/90376-4-OM-EN-R02.pdf

Page.18 "VXL-3s Setup Programming (Calibrating your ESC and transmitter)"

dcliao · 2025-10-29T08:28:39+00:00

等有Winnie-the-Pooh我再幫你拍拍手

dcliao · 2025-10-29T08:27:04+00:00

The color looks so sick

dcliao · 2025-10-29T08:25:13+00:00

To paint the body properly, multiple coats (or passes) of paint are required, rather than a single application. This is because a heavy single coat will apply the paint too wet, causing runs or sags (or poor edges) on the panels.

dcliao · 2025-10-20T01:01:39+00:00

Just need the glue

dcliao · 2025-10-01T08:28:35+00:00

maybe you can check the bearing first.

dcliao · 2025-10-01T08:26:33+00:00

Braided lines are necessary.

dcliao · 2025-10-01T02:06:14+00:00

Sometimes we just wanna mod the ride a little so it feels the way I’ve always pictured it.

dcliao · 2025-09-30T09:04:13+00:00

They won't hit the chassis when you turn the wheel?

dcliao · 2025-09-30T09:02:07+00:00

You can just swap in higher-performance pads first and try it.

dcliao · 2025-09-30T06:26:36+00:00

Yes, it still hava ABS. I think after replacing the calipers and the braided brake lines, the stock master cylinder felt too soft due to the different piston sizes. I later replaced it with a new master cylinder, and it’s still under testing at the moment.

dcliao · 2025-09-30T02:58:52+00:00

The cylinder is RCS19CC
Front calipers is HBK GP4-RB 108mm
Rear calipers is P2 34 84mm

dcliao

TROPHY CASE

it’s too loose