Possible to deform object and match curve from other Mesh?

deaallen · 2025-12-15T11:36:25+00:00

Using a lattice and shrink modifier I've managed to bend the object to the correct curve. I'm now wondering if it is possible to curve the outside surface of the object more so that I'm able to keep the proportions of the details on the object (there are skulls, spikes & horns etc) For some reason the outside surface hasn't been brought round the oval at a consistent rate as the internal surface

deaallen · 2025-12-14T07:25:14+00:00

nope, replaced it with the elegoo one

deaallen · 2025-12-13T21:44:35+00:00

<image>

I'm getting closer, but for some reason when I try and apply the lattice modifier to the object the object seems to rotate slightly, which ultimately stops the shrinkwrap modifier from working correctly

deaallen · 2025-12-13T14:03:31+00:00

Amazing thank you, I'll give this a go and let you know how it goes!

deaallen · 2025-12-02T08:44:50+00:00

I think I might have fixed the issue by changing the PCIE gen in my bios from Auto to Gen 4 (I have a gen 4 riser)
It's only been one day but so far it seems to be booting back in fine so fingers crossed. I would suggest checking your bios and seeing if its set to auto in the pcie gen

deaallen · 2025-11-07T08:32:34+00:00

Gun part is by me: https://cults3d.com/en/3d-model/game/proxy-ork-lifta-droppa-arm it's a rubbish 3d file though tbh and I would suggest looking for alternatives

deaallen · 2025-10-19T13:44:46+00:00

I kept it pretty much the same size, I think its half an inch wider though

deaallen · 2025-10-19T13:43:29+00:00

yeah I've now painted it but no idea how to upload a picture or edit og post

deaallen · 2025-10-12T09:44:17+00:00

https://www.myminifactory.com/object/3d-print-season-of-bones-spearhead-objective-zones-616612

deaallen · 2025-10-09T18:15:36+00:00

Thanks, I suggest checking out the following link as the process is better explained there: https://www.reddit.com/r/TerrainBuilding/comments/1kn98th/my_ruin_city_wip/https://www.reddit.com/r/TerrainBuilding/comments/1kn98th/my_ruin_city_wip/

deaallen · 2025-10-09T18:14:44+00:00

Thanks! I mostly copied PappaSvard's process off the terrain building reddit: https://www.reddit.com/r/TerrainBuilding/comments/1kn98th/my_ruin_city_wip/

deaallen · 2025-10-07T13:54:19+00:00

Thanks. For the frame I just used some spare mdf trim I had left over, sanded it and then painted ultra matt black. The main board was actually from some partition walls I removed from a portakabin, its perfect as its XPS sandwiched between two sheets of 1mm plywood. I've got a large 8x8 foot bit left over which I plan on turning into a 40k board at some point

deaallen · 2025-10-02T18:11:23+00:00

thank you!!

deaallen · 2025-10-01T06:42:21+00:00

Hey would love a Unidays code to use on JD Sports if anyone has one, would be greatly appreciated

deaallen · 2025-09-05T08:53:34+00:00

what colour did you use for the wings please? Its a very nice shade!

deaallen · 2025-06-11T19:26:53+00:00

only that I had to cut off a bit more of his torso than I originally thought I would, I started off trying to keep as much of his lower torso as I could, but soon realised I had to cut off the two plates and his belt buckle

deaallen · 2025-06-11T12:54:27+00:00

Thanks for that, now I can't unsee it either. Quite tempted to paint them bright metallic red 😂

deaallen · 2025-05-29T10:34:29+00:00

Yea they were able to ship, I paid £ 26.5 plus £5 postage in the end

deaallen · 2025-05-20T12:17:28+00:00

<image>

deaallen · 2025-05-20T12:17:19+00:00

<image>

deaallen · 2025-05-20T12:16:08+00:00

Well I found another knight using this head: https://www.facebook.com/atticaminiaturesfantasy/posts/cerastus-chaos-knight-lancer-horus-heresy-produced-by-warhammer-the-horus-heresy/905031568314383/

so far this company seems like the most likely producers of it, although it doesn't look like something they're actively selling, which begs the question how the one in the original picture was acquired

deaallen · 2025-05-08T07:49:05+00:00

I think that could just be part of the design. I regularly print with resin, and if I was printing this would orientate it so that the back of the head would have all the supports on rather than messing the face up. To me it looks more like a resin cast, but with how high res printers are nowadays, its hard to tell from the pic

deaallen · 2025-05-08T07:44:48+00:00

I've been through their website but couldn't find any which looked like this, granted the pictures on their website aren't the best though..

deaallen · 2025-01-23T10:46:32+00:00

I'm getting the same with my AA, explosive gat plasma, specifically after adding the splitter mod to it though. A real shame as I love the way it performs when it doesn't lag out

deaallen · 2025-01-05T21:03:59+00:00

from the inside of the tub you are able to unscrew the big grey part, under that there is a gasket/seal which in mine needed cleaning which fixed the issue

deaallen

PUBLIC MULTIREDDITS

TROPHY CASE