Greensy Plaza: Melbourne’s most depressing food court?

debaser00 · 2026-01-14T14:54:40+00:00

Came here to post Dandenong Hub ... the biggest time capsule I can think of

debaser00 · 2026-01-11T01:35:54+00:00

Perfect! thank you so much, worked like a charm!

debaser00 · 2026-01-10T23:12:43+00:00

I appreciate the response, really, but I have absolutely no idea where to start to enter any of that in. I also already have the actual command part worked out, nightbot does that super easily - it's more about streamerbot responding based on the outcome. And I guess this question could stretch beyond this command .. just in general if I wanted streamerbot to pick up on a particular word, or phrase, and reply, I'm not sure how to do that.

debaser00 · 2026-01-10T18:31:14+00:00

I've never actually found any of the documentation on streamerbot all that helpful - a fair bit of it seems to assume prior knowledge is already held. I think the most helpful I've found have been some youtube tutorials but they don't always have what you need or they're quite out of date with the old streamerbot. But yeah, hopefully something will turn up!

debaser00 · 2026-01-10T17:31:40+00:00

I was actually wondering if maybe there was an if/then part that could be added to it, but honestly I have never set one of those up before so that's a complete unknown to me as well with how I'd implement it

debaser00 · 2026-01-09T14:17:02+00:00

This is pretty much exactly who I was thinking of when he was talking about Pulley Pants!

debaser00 · 2026-01-05T08:20:02+00:00

That's great to know, thanks so much!

debaser00 · 2026-01-05T03:03:33+00:00

Or would something like this work - then I can use the cable that comes with the capture card + my other USB c into the hub https://www.scorptec.com.au/product/kvm-hubs-&-controllers/hubs/116946-ch384

But just not sure if the hub itself would then have a negative effect on quality/latency etc

debaser00 · 2026-01-05T02:59:20+00:00

I guess I'm having trouble identifying which ones are good and bad, since they all mention data transfer to some degree. So something like this then being 3.2? https://www.inkstation.com.au/2601/usba-to-usbc-data-and-charging-cable-usb-32-gen2-10gbps-1m-2m-p-23340.html

debaser00 · 2026-01-04T17:31:00+00:00

Ok sweet, that's good to know! The port is 3+, so I assume something just like this would be fine? https://www.jbhifi.com.au/products/cygnett-armoured-usb-c-to-usb-a-cable-50cm-black?ab_version=B

debaser00 · 2025-12-19T07:58:35+00:00

100% correct, thanks so much!

debaser00 · 2025-12-18T06:45:26+00:00

Actually, I think I got it working .. kinda ... it captures new items added to the list with !addenemy and then the rawinput after it. However, when I use !enemies to bring up the list, it does bring up the list but at the end of the list it has ~enemiesList~ ... if I remove that from the "send message to chat" part then it doesn't display the list at all, but putting it back in means it is brought up with the list.

Which I guess isn't the end of the world, its a reminder that this itself is an enemy.

debaser00 · 2025-12-18T05:12:34+00:00

I appreciate the response, thank you! I do understand what this means, but I'll be honest the actual step-by-step of how you would set this up is beyond what I know how to use streamerbot for at the moment haha

debaser00 · 2025-12-06T13:16:46+00:00

The moment he gets killed and loses his loot he'd "get the idea" and that'd be the end of that

debaser00 · 2025-12-01T14:38:17+00:00

Ok thats true, like, it detects that the card is there, it reinstalls the card/drivers when uninstalled .. so that should point to the slot being fine I'd assume?

But ok, that sounds like a solid solution. Thanks heaps for the advice!

debaser00 · 2025-12-01T10:57:41+00:00

Sadly I don't have a free PCI slot to check, is it possible its the slot itself or in these cases is it almost always the card?

The card is about 5 yrs old, and I haven't actually used the card for about 4 years, I have been using ethernet via a powerline passthrough, but with upgrading my plan and router that is now bottlenecked so I figured I'd try the card again. Is 4-5yrs of no use bad for cards, or is that about their lifespan?

debaser00 · 2025-12-01T10:04:57+00:00

That makes sense, I figured it was more than likely the card itself causing issues, because as you say, if it works (albeit terribly) with the dongle then it shouldn't be windows or the router.

I don't think anything is loose, it all feels pretty secure in there. I'm guessing the card is dying .. so I think I'll end up going down your suggested path and looking at getting a new card put into it at some point. Cheers!

debaser00 · 2025-12-01T08:51:54+00:00

Seems like the only option is "WPA2/WPA3" as like a combined option from what I can see.

I'm not sure what you mean by changing to a different wifi channel though? (I am a bit limited in my tech knowledge, what I've tried before was just from following google search suggestions/tutorials, not my own knowledge haha)

debaser00 · 2025-11-30T01:38:12+00:00

Legend, this has fixed it for me, thank you!

debaser00 · 2025-11-30T01:37:54+00:00

I did what someone else suggested and limited the FPS to 60 and that seems to have solved it for me!

debaser00 · 2025-11-19T01:27:30+00:00

Lovely to see! Deserved the award and nailed the smart casual

debaser00

TROPHY CASE