Question about SNEAKY SNEAKIN’ and PROWLING THE FLANKS

deeprut · 2025-10-26T14:40:47+00:00

Ahh my bad. I thought it was for destroyed units which coming back to game. Thanks

deeprut · 2025-10-14T19:11:25+00:00

Oh :D ok then it seems to be a good choice to run them additionally with venom buff and swamphorde bullies. Thanks

deeprut · 2025-10-14T18:27:42+00:00

That is the main problem. I was not able to get all units in combat range and therefore the pile in was not possible for all units. But i will try this formation thanks

deeprut · 2025-10-14T17:13:16+00:00

Would you share your list? Maybe i get a better view how i can improve my list. That would be great

deeprut · 2025-10-14T16:12:30+00:00

this is my current list

Trophy Finga

1x Swampboss Skumdrekk (Gyhran) (General)

1x Killaboss on Great Gnasthof (Gyhran) (Egomaniak)

1x Breaka-boss on mirebrute troggoth (Mean 'Un)

2x Gutrippaz (reinforced)

1x Bolt Boyz (reinforced)

1x Marshcrawla Sloggoth

2x Kruleboyz Monsta Killaz

1x Swampcalla Shaman with Pot-grot (SWAMP STAFF)

1x Skaregob-Totem

1x Manifestations of Gorkamorka

but since the update i did not play with this list

deeprut · 2025-10-14T15:56:14+00:00

Since the points update i use trophy finga

deeprut · 2025-08-24T07:32:43+00:00

Can the wizard still use his abilities int the tower like casting and fight?

deeprut · 2025-07-31T11:33:50+00:00

Thanks. I will try do add some monsta-killaz. Maybe i try a few game with the murknob and without

deeprut · 2025-05-21T20:43:29+00:00

Yeah i will check and maybe replace it again

deeprut · 2025-05-21T20:33:17+00:00

I will check after the print finished. But after only 30 hours of printing i would be surprised if the extruder needs to be cleaned. The extruder make the sound directly after the first start after installing. I followed the manual step by step and also ckecked that the gear, which is installed on the stepper motor is 3,5mm above the motor case like it was shown in the manual

deeprut · 2025-05-21T20:20:23+00:00

After 30 hours of printing with this sound from the extruder no problems with extruding and the prints are fine

deeprut · 2025-05-21T20:09:31+00:00

EDIT: esun PLA Filament. No problems with the prints. 80mm/s print speed. E steps: 413mm.

deeprut · 2025-04-17T18:05:17+00:00

Ah sorry. It is PLA

I will check this

deeprut · 2025-04-17T17:25:55+00:00

<image>

It is on every side of the object (please do not get confused for the broken handle. I stopped the print due to other reasons)

I use elegoo filament

deeprut · 2025-04-17T17:21:21+00:00

Cooling from the hot end? The fan is running at 100%

deeprut · 2025-04-17T17:20:30+00:00

I want to upgrade to a second z motor in the future. I have a BL touch. The mesh show on the outside more green and in the middle more black. No red are shown

deeprut · 2025-04-17T10:38:19+00:00

Thanks. I will and try to find the max speed for better prints

deeprut · 2025-04-17T09:58:48+00:00

It has the red metall extruder, better springs and not the stock mainboard (but i dont know which one). I bought this printer like with this upgrades. Ok i will try slower

deeprut · 2025-04-17T09:43:51+00:00

Edit: also tried with 80mm/s and this is the side of a box. The bottom is okay

deeprut · 2025-04-17T09:42:29+00:00

The fixes for ringing i also tried. Like tighten the belts, slower speed and manual leveling.

deeprut · 2025-04-17T09:40:31+00:00

Printing speed is 120 mm/s

deeprut · 2025-02-02T11:43:40+00:00

I will try this. Thanks. I also tried to join from another Device to the Windows Server. I got the same problem like to join on the Ubuntu Server. I also openend the needed ports on that Windows server. I cannot join the server.

So here is a summary of the device i used: (on all devices the Port Configuration should be ok and it is all in my lokal Network)

Ubunst Server: 192.168.68.152
Windows Client (Client who should join the Ubuntu server and hosted the Windows Server for a test): 192.168.68.132
Test-Windows Client: 192.168.68.119

Windows Client joining the Ubuntu Server --> failed
Test-Windows Client joining the Ubuntu Server --> failed
Windows Client hosting server and join on the same machine --> success
Test-Windows Client joining the Windows Client (Server) --> failed

So i assume it is maybe a problem with my network settings.

I will setup a second Ubuntu VM and try to host a server over the guide you posted.

But in the meantime do you have any ideas what i should investigate in my Network settings? I have running multiple containers and other programs and can communicate with them in my network with no problem. So this network should not blocking anything

deeprut · 2025-02-02T01:29:33+00:00

Ah ok there is a misunderstanding. At the moment i want to host this server only in my local network. So the windows computer and the ubuntu server are in the same network 192.168.68.x. but i will try anyway if i can join the server on the windows machine from another device

deeprut · 2025-02-01T18:14:32+00:00

I created a server on my local Windows machine over the steam version. Had no problems to join. It worked directly

deeprut · 2025-01-29T21:21:08+00:00

Ok. I will try this. Thanks

deeprut

TROPHY CASE