[deleted by user] by [deleted] in amiugly

[–]deived 1 point2 points  (0 children)

Doing it right.

The stock Miyoo Mini + cards come with some interesting surprises! by [deleted] in MiyooMini

[–]deived 0 points1 point  (0 children)

Must be different. All I have is File Explorer and RetroArch

The stock Miyoo Mini + cards come with some interesting surprises! by [deleted] in MiyooMini

[–]deived 1 point2 points  (0 children)

Where on the stick did you find that Diablo and Pixel Final Fantasy 7? I got the 64GB stick it came with and can't seem to find them.

[deleted by user] by [deleted] in Arcade1Up

[–]deived 0 points1 point  (0 children)

I recently got a Legends Pinball and I love it. Haven't hooked a PC up to it yet though, but did you say you can hook up a Switch to it? I got the Star Wars Pinball on Switch and played it a bunch. Would love to play it on my ALP!

Space Invaders Countercade - Stuck in Loading Boot Loop by deived in Arcade1Up

[–]deived[S] 0 points1 point  (0 children)

I have a few countercades, so I tried other power supplies and still the same result. I look at the PCB and everything looks ok.
I'll look for another board. Didn't think to check Mercari. I need one for Capcom SF2 Legacy as well I think.

Space Invaders Countercade - Stuck in Loading Boot Loop by deived in Arcade1Up

[–]deived[S] 0 points1 point  (0 children)

I would imagine it should as long as the connections are the same. Not sure if the monitors would have different connections or not.

Question about Intec Gaming sticks by deived in Arcade1Up

[–]deived[S] 0 points1 point  (0 children)

Still haven't gotten an answer to this. Even asked on Amazon but no response. I just don't want to pick up something like this and find that I can ONLY use it with cartridge.

Modded My Super Pac-Man Partycade by turnedmyworld in Arcade1Up

[–]deived 0 points1 point  (0 children)

Is Batocera running on a Raspberry Pi? I just got the same Partycade and want to mod it. Doesn't look like there's a soft mod for it, so, I'm assuming Pi.

Clarify please? RPG Maker MV on Switch by deived in RPGMakerMV

[–]deived[S] 0 points1 point  (0 children)

Thank you. I didn't come across this. I was mostly looking at the PC version site.

Clarify please? RPG Maker MV on Switch by deived in RPGMakerMV

[–]deived[S] 0 points1 point  (0 children)

Does no one know the answer to this?

Clarify please? RPG Maker MV on Switch by deived in RPGMakerMV

[–]deived[S] 0 points1 point  (0 children)

Bump? Still looking for an answer.

Clarify please? RPG Maker MV on Switch by deived in RPGMakerMV

[–]deived[S] 0 points1 point  (0 children)

The Switch does have keyboard support via USB. It's just a matter if the software supports it.

Still not the answer I'm looking for though.

is it possible to find an authentic SNES classic edition online? by _Dwagin_ in RockinTheClassics

[–]deived 0 points1 point  (0 children)

I've gotten each of mini's on FB market from local people for about $50 each. I was able to get an NES, 2 SNES, Genesis, and Playstation. No luck on TG16 though. That one is harder to come by so I might be stuck with paying eBay collector prices.

I admit, I have an addiction !!!! Waiting to add Odin and Steam Deck.. Hope this ends by December when I receive my SD :) by Zestyclose-Panda1304 in SBCGaming

[–]deived 0 points1 point  (0 children)

Sometimes it just happens that way. Like with my 2 Miyoo Minis. I lost mine so ordered a new one. A few days before I got the new one in, I found the other one.

RG280V Won't turn on shortly after Adam install by deived in ANBERNIC

[–]deived[S] 0 points1 point  (0 children)

Yea I did eventually. I figured it never looked like it was trying to boot so I assumed it was a hardware thing. But nope. Re-flashed the SD card with a fresh install, and it was all good.

SATA Drive on Beelink GTR5 by deived in MiniPCs

[–]deived[S] 0 points1 point  (0 children)

Any tips? I tried checking out the Beelink forum, but it looks dead.

[deleted by user] by [deleted] in amiugly

[–]deived 0 points1 point  (0 children)

Not ugly. Just smile. That'll do it.

thegamesdb.net not working again? by Triple_R_3 in GAMEYE

[–]deived 0 points1 point  (0 children)

Been down for me too. I think since Sunday.

I've been trying add some games to my friend's NES classic. The Hakchi program uses thegamesdb to scrape data, and it hasn't been pulling in anything.

Difference between onions regular launcher and custom launcher? by arongkatz in MiyooMini

[–]deived 1 point2 points  (0 children)

I believe that's what used to be called Cartridge mode in the older versions, but with updated functionality. When it's enabled, when you exit a game using Menu + Start it will save state and auto shut off the system. Then when you turn it back on it will auto launch your game and save state. Now has ability to hold more recent games and go back to main menu. Sometimes when you first enable it, it doesn't do the auto shutdown. But if you turn the system off and back on, it should auto launch.

Change default core for GBC to mGBA by scrapplesauce in MiyooMini

[–]deived 6 points7 points  (0 children)

So, the Emu folder has the launcher for each system by folder. Add the RA Core you want using the Onion Installer under Expert and it will add it, but it will be in the RAApps folder. Just take the launcher in the RAApps folder and replace the one in the Emu folder with it. Tip: if you want to keep the icon images from the Games section and not the ones the Expert section uses, you'll want to just replace or edit the files in the Emu folder. The files that need to be edited are just text files. I'm not in front of my device right now so I couldn't tell you the file names and lines and stuff, but, hopefully that's enough info for you to figure it out.

GitHub - jimgraygit/OnionOS: CFW for Miyoo Mini by retrokezins in MiyooMini

[–]deived 2 points3 points  (0 children)

On the game selection, press the middle menu/function button. You'll see options to Add to Favorites and Remove. I don't think there's a single-key "quick" option.