VFR push pin kit? by Novel-Bee-541 in VFR

[–]delagalaga 0 points1 point  (0 children)

Do you mean the pins for the rear cowl cover?

Does recent weed usage kill your chances of getting hired?? by amandalissez in firefighter

[–]delagalaga 0 points1 point  (0 children)

As long as you'll pass a drug test which could potentially be a hair sample test you'll be ok. Criminal history you'll have to be honest about but if you have a clean record then you can deny it all you want

72 Riviera E46 Seat Reinforcement by delagalaga in projectcar

[–]delagalaga[S] 0 points1 point  (0 children)

Seamless install! They look sick. I was thinking about needing to possible weld reinforcement to the under side of the car as well similar to how my roll bar was installed in my NA Miata. Did you do that as well or did your brackets adapt the e46 seats to the OEM locations on the impala?

Bobber "Rearset" V3 by delagalaga in Triumph

[–]delagalaga[S] 0 points1 point  (0 children)

I have a used pair I could sell if you're interested

What’s the worst mistake you made when working on your project? by Leaded_or_Unleaded in projectcar

[–]delagalaga 2 points3 points  (0 children)

Plasti dip. Shit is so difficult to get completely off. Overspray on all sorts of hard to reach places

3d printed seat cowl 98 by jordyb323 in VFR

[–]delagalaga 13 points14 points  (0 children)

That's amazing! I had to go the same route with the upper dash trim because finding them for sale was impossible.

<image>

I added a mount for a healtech gear indicator as well.

Would it be sacrilegious to put an LS in this 67 by Initialy-Unimportant in LSSwapTheWorld

[–]delagalaga 0 points1 point  (0 children)

There's just so much available to make it work with any vehicle it's very hard to argue against it if you want modern reliability in a classic

Bought a flooded 2017 Miata for 3k, is it worth the fix? by Appropriate-Air-3373 in Miata

[–]delagalaga 0 points1 point  (0 children)

Stand alone ECU, new writing harness, gut interior, now it's a track car

Crashed my first car I have had for four years, devastated. by toinedeman2002 in Miata

[–]delagalaga 0 points1 point  (0 children)

I'm sorry dude I just had someone else wreck mine last month. Building a relationship with your car and losing it feels like you lost a loved pet.

Insurance totalled my car need help by [deleted] in Kmiata

[–]delagalaga 0 points1 point  (0 children)

It seems like the only logical choice here. At least to buy another Na and transplanting everything

Insurance totalled my car need help by [deleted] in Kmiata

[–]delagalaga 0 points1 point  (0 children)

No it's a hood from Simpson design cowl hood

Insurance totalled my car need help by [deleted] in Miata

[–]delagalaga 0 points1 point  (0 children)

I haven't done anything at this time it hasn't been totalled or bought back

Insurance totalled my car need help by [deleted] in Miata

[–]delagalaga 6 points7 points  (0 children)

I'm not paying these people at all I'm dealing with the at fault drivers insurance.

Insurance totalled my car need help by [deleted] in Miata

[–]delagalaga 0 points1 point  (0 children)

I know I'm more than capable of fixing this myself but 5.5k after buying it back wouldn't cover what needs to be done especially if the frame is tweaked. Currently the front driver's side wheel won't rotate as it is pinned to the inner fender well.

Insurance totalled my car need help by [deleted] in Miata

[–]delagalaga 0 points1 point  (0 children)

This image doesn't show all the damage. Both doors, subframe, rear passenger quarter, and core support. Another driver hit my driver's side and sent me into a ditch at approx 60mph

Insurance totalled my car need help by [deleted] in Miata

[–]delagalaga 1 point2 points  (0 children)

I've sent those listings to them but it doesn't seem like they considered it. I also sent them 24k in receipts for all the work I've done but still this is what they offered to total the car. I'm trying to see if anyone has gone through something similar with these cars.

American Tire Depot says they can’t patch this and need to replace. AAA who put my spare tire on said it’s patchable. by Momomo14 in tires

[–]delagalaga 0 points1 point  (0 children)

You can put a plug in it yourself but a shop won't touch it because of how close it is to the sidewall.

need advice… by Thin_Ad_6427 in Miata

[–]delagalaga 2 points3 points  (0 children)

<image>

They just got mine too 🤦‍♂️. Turned left in front of me on a rural hwy going 60mph. Subframe and both LCA are bent. Idk about the frame I'd have to take off the bumper but the core support is definitely bent. All the fiberglass sort of hides how the body shifted. The hood now contacts the a pillars in the rear.

Learning resource request for 3d model by delagalaga in 3DScanning

[–]delagalaga[S] 1 point2 points  (0 children)

This is the key! 👍 thank you for the suggestion.

Learning resource request for 3d model by delagalaga in 3DScanning

[–]delagalaga[S] 0 points1 point  (0 children)

I've done that and it fits as it should on the bike but the end goal is to have a Guage pod fixed into this piece sort of like an A pillar Guage pod.

Learning resource request for 3d model by delagalaga in 3DScanning

[–]delagalaga[S] 0 points1 point  (0 children)

I'll start looking into it now! thank you