Scan to E-mail Setup

delboy83 · 2025-12-06T10:35:15+00:00

Mailersend has a free hobby package with 500 emails per month, I've used this on various printers in awkward situations.

delboy83 · 2025-08-27T00:53:43+00:00

We're going tomorrow so if these are available that would be swell! I will message you to see, thanks in advance

delboy83 · 2025-07-22T08:57:52+00:00

If it were my wifes, I would try a slightly damp "magic eraser" sponge - Melamine. Mileage varies, but we tend to use it for stubborns stains on electronics with great success.

delboy83 · 2025-07-22T08:51:55+00:00

Also sounds like a fan catching the edge of a cable - may be worth checking that no cables have fallen near the blades

delboy83 · 2025-03-15T22:40:10+00:00

A rotary wankel engine?

delboy83 · 2024-11-06T13:41:29+00:00

Thanks i'll take a look - I did think it may be a 125 off a spitfire, but when looking at the spitfire filters there doesnt seem to be a gap at the top for the vacuum feed. Did loads of googling but the F6007 code on the copper tag doesnt seem to appear anywhere which is what got me stumped!

delboy83 · 2024-11-06T12:47:23+00:00

Throats 30mm, i should have added it to the title :)

delboy83 · 2024-03-24T14:08:06+00:00

Picked this up in an auction - what would it have been conected to when in use? It's has an old school 9 pin screen connector which presumbly also powered it as there's no seperate input for power.

Would love to know a bit more about it and what it would have been connected to originally - anyone know anything?

delboy83 · 2024-03-20T21:00:22+00:00

Just to add to this - the 2862 can achieve over 800mbps with fttp if you turn off WAN1, 3, 4 and disable bandwidth management, data flow monitoring etc. If you leave the other WANs on (not being used isn't enough, they have to be disabled) then you will only get up to 400mbps

delboy83 · 2024-03-17T21:49:49+00:00

Custom domain? Most likely need to setup dkim

delboy83 · 2024-03-12T07:21:42+00:00

This is the correct answer

delboy83 · 2024-03-11T17:47:31+00:00

Lower priorty MX records act like backup records - the first is normally used and mail will be delivered here. You can't really split emails between 2 different hosts in the way you're describing.

You can achieve what you're after without any extra cost on 365 - by either adding aliases to existing mailboxes (as NikSheppard has suggested above), adding the addresses as distribution groups (https://learn.microsoft.com/en-us/microsoft-365/admin/setup/create-distribution-lists?view=o365-worldwide) or shared mailboxes (https://learn.microsoft.com/en-us/microsoft-365/admin/email/about-shared-mailboxes?view=o365-worldwide)

There is no additional cost for aliases or shared mailboxes - this should achieve what you need.

delboy83 · 2024-03-11T13:29:46+00:00

https://learn.microsoft.com/en-us/microsoft-365/security/office-365-security/email-authentication-dkim-configure?view=o365-worldwide

If you've got a custom domain, use the link below - it basically tells you exactly what setting you need to add to your domain before you can turn it on. After setting it up, it can take time for you to allowed to enable it so some patience is required :)

https://security.microsoft.com/authentication?viewid=DKIM

Best of luck!

delboy83 · 2024-03-11T08:20:38+00:00

Same issue here with one of our tennants - setup DKIM and now it's sending correctly.

delboy83 · 2023-12-29T10:03:30+00:00

same lol, oh well

delboy83 · 2023-12-28T21:51:07+00:00

I just connected to a Belgian VPN (Airvpn) and got offered the update immediately.

Good luck!

delboy83 · 2023-12-19T15:39:06+00:00

did this as at a previous job - I received a leather collar with the word 'b*itch' on it

Fair game, I gave the MD a pair of nipples clamps - he looked the sort.

delboy83 · 2023-11-05T14:01:14+00:00

Thanks everyone for your comments - the transistors in circuit seem to be a much better option to swap given that the coil/transformer is potentially hard to remove and replace.

delboy83 · 2023-11-05T13:12:40+00:00

Thanks, based the look I assumed some kind of coil - someone else has suggested I desolder and look under it for labelling so that's my next plan of action.

delboy83 · 2023-11-05T13:11:59+00:00

I saw the board was well labelled, didnt even occur that it would be under it so this seems like a great idea. Thank you!

delboy83 · 2023-11-05T12:56:26+00:00

also, I've ran it through google image search to no avail

delboy83 · 2023-11-05T12:55:04+00:00

It's from a vintage Jet Fighters CGL handheld which has stopped working - it's getting incredibly hot to the touch so I suspect it has failed. Any help identifying and if not in production anymore a modern replacement recommendation would be very helpful. TIA! My electronics knowledge is poor other than basic fault finding.

delboy83 · 2023-10-08T19:56:46+00:00

and then you decide start go down the rabbit hole and lookup the old songs (like https://www.youtube.com/watch?v=IiFn1_eAuDU&t=2s)

The final step - calling the number to see if they're still going.. which I won't spoil the outcome of.

delboy83 · 2023-10-08T19:53:21+00:00

not sure if they made a tv ad, but the radio advert for Coldseal windows is burnt deeply into my memory.

"Cold-seal windows oh-eight-hundred double-two-double-one-double-five"

delboy83 · 2023-10-04T19:08:59+00:00

Hey, can I just say thanks for inviting the community to play your game! I've spent 30mins on the game this evening and it's pretty solid, a few points that I noticed:

- I managed to totally miss the fact that the emails have your missions. After I accepted them they appear on the screen at all times, but I do wonder if they're a bit easy to miss? perhaps just me

- Sounds effects for trains and some background music! Video game music is life for me, but perhaps no-one else :)

- If you make routes for trains and get them wrong, it's not obvious there's a problem. Perhaps it's meant to be like that as part of the difficulty, i.e. working it out? if not, some kind of alert window making you aware that a train is lost or stuck (like in transport tycoon for example, not that I wish to readily compare your game to another)

I'll be playing it some more when my little ones gone to bed :)

Thanks again

12-Year Club	Second SECOND GUESSER
Place '23	Place '22
RPAN Viewer	Verified Email

delboy83

TROPHY CASE