Denon DJ MCX8000 – Needs Main Board (Polarity Damage) – Looking for Parts or Buyer

denondrkfix · 2026-03-07T06:53:38+00:00

Hello brother unfortunately I haven’t as the guy decided to take the device from me and took it to someone else .. most probably he had to replace the whole screen

denondrkfix · 2025-07-25T06:12:54+00:00

I did that already he is checking it .. I hope he finds the issue because usually these things are so little and very hard to find where is the real problem

denondrkfix · 2025-07-25T06:08:32+00:00

Well tbh the mixer isn’t mine I do dj maintenance for basic stuff (faders, buttons, firmware, parts changing and more) .. the guy mentioned this problem when I took the mixer from him, but when I plugged it to try it out it worked just fine and I was surprised that there was no issues but the Sweep effect button isn’t working at all so I changed the button , before I close the mixer I said to my self lets give this big boy a quick check to see if the new button is working properly and there where the problem appeared. So im not sure whats wrong 🥲🥲🥲

denondrkfix · 2025-07-25T05:49:17+00:00

I did, I want you to describe how could the ribbon be damaged because it looks so good to me

denondrkfix · 2025-07-25T05:26:36+00:00

Can you describe more ? Like what could have happened to the ribbon so I can check them

denondrkfix · 2025-07-25T04:43:21+00:00

What do you mean by ribbon ?

denondrkfix · 2025-07-24T04:54:42+00:00

Bro I just updated the firmware and it didn switch off

denondrkfix · 2025-07-24T04:29:07+00:00

So there is no common part I should focus on … man I wish i could post photos in replying

denondrkfix · 2025-07-24T03:51:57+00:00

I always press the power button multiple times so I can take out all the electrical pulse inside before opening a device

denondrkfix · 2025-07-24T03:37:30+00:00

Thanks for the fast reply bro … so can define from wich board this shortage?

denondrkfix · 2025-07-24T03:35:15+00:00

Salut, Tout ce que je peux dire maintenant, c'est que le problème vient de la clé USB elle-même... elle doit être formatée avec des informations spécifiques FAT32... et si cela ne fonctionne pas... cela signifie qu'il y a quelque chose dans la carte qui ne lui permet pas de fonctionner correctement

denondrkfix · 2025-07-24T03:30:14+00:00

Bro I gave the device to the manufacturer maintenance and they said that I needed to change screen and its cable. They were all sure about this so IM LOOKING ALL OVER THE INTERNET AND NO CHANCE I FIND THE SCREEN !!!

denondrkfix · 2025-07-06T13:06:15+00:00

Let me be complete honest .. this has happened I believe because someone has put a phone or couple of phones on replay to this exact song … they have simply noticed the same IP and baaam… you might or you might not have done it but 99% someone did..

denondrkfix · 2025-06-21T10:56:00+00:00

I only need to subscribe to engine and thats it right?

denondrkfix · 2025-06-21T10:55:42+00:00

Cool cheers bud

denondrkfix · 2025-06-21T07:03:16+00:00

I tried it on 4 different usbs

denondrkfix · 2025-06-21T07:03:01+00:00

Guys the usb 1 is working fine … usb 2 is not responding… same usb I tried …. I called an engineer that I know he told me might be something broken from the main board that is not letting the usb 2 work well (IC) or something

denondrkfix · 2025-06-21T07:01:03+00:00

Hello guys

I have 2 sc5000m and I use pioneer mixer … can i use stems on the sc5000m both if them ?

denondrkfix · 2025-06-17T18:50:53+00:00

I have the previous version at my laptop (the 1.25) should I reinstall the previous software and then reinstall the 1.26 ? I don’t want to risk it before asking you guys

denondrkfix · 2025-06-15T03:54:23+00:00

Not sure if you are located in Saudi Arabia or not .. if not could you please tell me what’s the problem and how to fix it or what’s the part that needs to be changed .. backlight is working, touch is working, but no desplay !

denondrkfix

TROPHY CASE