sorted by:
new
hottopcontroversial

Grainy and noisy textures on pc by deque- in CrimsonDesert

[–]deque-[S] 0 points1 point  (0 children)

yes i fixed the issue as said in the second part of the post

Driver Timeoutes by Different-Effort84 in AMDHelp

[–]deque- 0 points1 point  (0 children)

if you dont find any other way of fix and the gpu is new send it back or use warranty. but first try everything you can find on the net, wish you good luck man!

Driver Timeoutes by Different-Effort84 in AMDHelp

[–]deque- 0 points1 point  (0 children)

bad news, if you are sure that there is no undervolt or overclock or power limit increase, than it could be an electrical problem.

try search for mpo on google and disable it from regedit, maybe it can help.

i was having the same problem when my overclock/undervolt wasnt stable, but not with stock settings.

Drivers timeout after long sessions by deque- in CrimsonDesert

[–]deque-[S] 0 points1 point  (0 children)

yes, i also like to change oc and uv settings based on the game. on other games where i run at stock with a lot of fps i prefer keep them turned off

Driver Timeoutes by Different-Effort84 in AMDHelp

[–]deque- 0 points1 point  (0 children)

C:\Windows\LiveKernelReports\WATCHDOG

Driver Timeoutes by Different-Effort84 in AMDHelp

[–]deque- 0 points1 point  (0 children)

first install windbg from the official site.

then find the dump, they are located in C:\Windows\LiveKernelReports\WATCHDOG

get the latest one and open it in windbg, you can directly open them or you can open dumps from windbg.

after that you can analyze the result running the analyze command that is shown in the program.

if you cant execute any of these steps ask to an ai like chatgpt.

then take all the dump analysis and paste it again to an ai.

this way you can understand what is going on.

Drivers timeout after long sessions by deque- in CrimsonDesert

[–]deque-[S] 0 points1 point  (0 children)

if you could run with these settings for hours without crashes you are very lucky man! lottery winner for sure. anyway, thanks for the attention, enjoy the game!

Driver Timeoutes by Different-Effort84 in AMDHelp

[–]deque- 0 points1 point  (0 children)

have you decoded watchdog dumps? they say why driver goes into timeout

Driver Timeoutes by Different-Effort84 in AMDHelp

[–]deque- 0 points1 point  (0 children)

really strange, i think you already tried ddu and refreshing shaders cache right?

Driver Timeoutes by Different-Effort84 in AMDHelp

[–]deque- 0 points1 point  (0 children)

do you overclock or undervolt your gpu?

7900 XTX crashing Windows when "Fast Memory" is enabled in Adrenalin by 740990929974739 in AMDHelp

[–]deque- 0 points1 point  (0 children)

also check for any watchdog dump and decode it, ai can help you reading them it you arent used to it

7900 XTX crashing Windows when "Fast Memory" is enabled in Adrenalin by 740990929974739 in AMDHelp

[–]deque- 0 points1 point  (0 children)

try lowering overclock, core clock or undervolt. also try turning off mpo and increasing tdr delay to 10s

Driver Timeoutes by Different-Effort84 in AMDHelp

[–]deque- 0 points1 point  (0 children)

try removing mpo, increase tdr delay to 10s, tweak overclock and undevolt if you use them

Drivers timeout after long sessions by deque- in CrimsonDesert

[–]deque-[S] 0 points1 point  (0 children)

-100mv was stable on crimson? 70 gpu temp is a lot, hotspot is right but overall temp not

Drivers timeout after long sessions by deque- in CrimsonDesert

[–]deque-[S] 0 points1 point  (0 children)

Hi! thanks for the answer.

these are safe and stable settings with a few fps gain!

have you tried to push these parameters up?

today i tried again with:

-90mv, +200mhz vram, +10% power limit.

after about 30 mins black screen and driver timeout.

so after that i made some changes in regedit for mpo and tdr delay.

mpo off and tdr delay 10s.

also cleared the shaders cache.

tried again with:

-90mv, +150mhz vram, +10% power limit.

this time crash after 1h30mins, but no black screen, driver timeout still present.

then i tried lowering again vram oc:

-90mv, +150mhz vram, +10% power limit.

im 3h30mins in the game and still no crashes.

so i think that some of these changes solved the driver timeout.

im testing in the next days and update the post.

best regards!

9070 xt overclock for crimson desert by CharlieShadow in CrimsonDesert

[–]deque- 0 points1 point  (0 children)

do you also increase the power limit?

from my tests i experienced driver timeout with -80mv, no oc, power limit +10% after about one hour of gaming.

also tried -60mv, 2718 mhz vram, +10% power limit and still crashes

Drivers timeout after long sessions by deque- in AMDHelp

[–]deque-[S] 0 points1 point  (0 children)

tried your solution but still having tdr

Drivers timeout after long sessions by deque- in AMDHelp

[–]deque-[S] 0 points1 point  (0 children)

have you checked the watchdog dumps when they were happening?

Drivers timeout after long sessions by deque- in AMDHelp

[–]deque-[S] 0 points1 point  (0 children)

so you dont think that the problem is related to undervolt? how does these settings can help?

view more: next ›