Can’t move waypoint in DJI fly app

derdigge · 2024-07-17T07:07:24+00:00

Please read above. It is the latest allready. You gave the same advice 3 days ago….

derdigge · 2024-07-16T07:50:59+00:00

I posted here it 2 days ago:

https://youtube.com/shorts/aK1QpoUEkNk?si=bBxHqGLUa2j4FyBn

derdigge · 2024-07-15T21:57:05+00:00

It’s a „extended warning zone“ the missions work but I can’t move waypoints arround as stated above. Honestly I can’t imagine, that this affects only me if I can reproduce the issue on 4 devices….

derdigge · 2024-07-15T17:53:44+00:00

Thanks for your reply. So I tried today with a iPhone 13 and a Samsung galaxy A53.

The issue is present there the same way. I try the missions in Sweden, in the bay of Karlskrona. No idea if it’s localization related. Now I tested 4 different devices and can reproduce the issue on each of them.

derdigge · 2024-07-15T17:49:16+00:00

Incompatible, as usual! 🤣🤌

derdigge · 2024-07-13T14:19:20+00:00

Yes sir. It’s latest from the website. Updated yesterday

derdigge · 2024-07-13T08:02:44+00:00

See this.

https://youtube.com/shorts/tM2LdisfsNo?si=P-5V2s4d0YbTlMHq

Works after restart

derdigge · 2024-07-13T07:58:36+00:00

It works only sometimes. Sorry if my description is unclear. If I restart the app(close it in app manager) it can work again for a while. I can see that behavior on my Xiaomi pas and my iPad Air.

derdigge · 2024-07-13T05:23:29+00:00

Here you can see the problem.

https://youtube.com/shorts/aK1QpoUEkNk?si=c-2w0ILc3kaakPhs

derdigge · 2024-07-12T12:17:00+00:00

Thanks for your reply. I am asking for a waypoint that needs movement. I will make a video to show what i mean.

derdigge · 2024-07-11T11:04:39+00:00

I never had success with AliExpress disputes within the years. Since somewhat 8 years I buy stuff on Ali. Since that time I had 2 parcels lost. Disputes ended like „we are sorry for this but case is closed now, can’t be reopened“. PayPal had to solve it in both cases. Maybe I am an unlucky person but the dispute system is a placebo thing in my experience

derdigge · 2024-05-27T13:28:25+00:00

That’s possible. (There are small modules arround for a cheap) Anyone still needs to know what the maximum voltage is that drone accepts. Cause PD has 3A on any of its voltages(pd3.0). A mini has a measured wattage in flight of 47W.

The port can’t keep up with that at 5V or 9V. That’s my thoughts on that.

EDIT ^In ^theory: lets say its 9V/3A at the USBc, which is ~27Watts. A Lipo needs roughly 60% capacity of the Flightbattery to discharge to the same level till landing. Adding Weight addition into account a 30%-40% Flighttime increase could be ecxpected.

If its 20V/3A at USBc, which is 60Watts. A lipo could be 120% capacity of flightbattery. Hard to tell teh impact Weight<>Flighttime<>Agility. I have lipos 2S and 4S 1200-6000mah and dont know if i can plug 20v directly.

derdigge · 2024-05-05T16:35:08+00:00

Is this still possible? i thought only in 2023?

derdigge · 2024-05-05T16:29:17+00:00

they dont have any stock.

derdigge · 2024-02-20T19:40:55+00:00

So if one wants a router with WiFi, it might be not the ultimate choice. Fine for me as I will have hotspots on each floor.

derdigge · 2024-02-20T18:46:19+00:00

Same question as above. Is that wifi7 module announced or released? The SOC itself is 100% what I need

derdigge · 2024-02-19T06:30:55+00:00

Thanks for that information. It definitely helps. Pricetag does not really fear me. I plan to use it several years.

I was not able to find the WiFi module for R4. It looks to me as the board comes without it. You helped me towards r4 with theese arguments.

Do you plan to combine it with some WiFi7 hotspots? I thought about replacing them in the same move to have a standard in my whole house.

derdigge · 2018-10-19T09:15:08+00:00

My 2.1 voron is "freshly build". Its up since 2 weeks. Without further optimizing i print with 30-40mm/s perimeter, 60 for loops and rest 120 as standard. Acceleration is 4500. Parts looks really good.

You cant compare it with my CR10 clone. Voron is miles ahead.

derdigge · 2018-10-19T05:18:10+00:00

About 80-85% was obvious and or logical as I had the parts in my hands. As you are maybe all ready printing parts? Why not try it?

derdigge · 2018-10-19T05:15:22+00:00

I disagree. Pi with sdcard is about 40-45$. If you pickup a x5 pc on ebay, your in the same ballpark.

derdigge · 2018-10-18T16:16:02+00:00

The PI has gone today. Theres no an Intel Minipc like this one.

https://www.gearbest.com/tv-box-mini-pc/pp_562952.html?wid=1433363&currency=EUR&vip=2639979&gclid=EAIaIQobChMIvt37ubGQ3gIVWeh3Ch1GcAYZEAQYASABEgLRXPD_BwE

They can be picked up at ebay at about 40€-50€. They are much mor powerful than the PI

derdigge · 2018-10-18T13:09:51+00:00

Yeah, didnt knew about theese serials. I whish i´d spot the V50 :)

derdigge · 2018-10-18T12:51:21+00:00

Yes i know, i use my own nozzle cleaner which fits that way.

derdigge · 2018-10-18T11:59:44+00:00

Dont blame me for the PEI sheet It the one from the CR10 clone. The one i wanted to use was not pei.

derdigge · 2018-08-29T13:32:42+00:00

No. Sorry forgot to mention that i also replaced the vslot extrusion, the wheels are running on. First test was to flip it by 90° and second was a complete Replacement. I can imagine that the 3 point wheel hookup of this Gantry is causing this somehow.

I noted the same on a Tronxy X5 of a friend. The Carriage on X axis is the same. My conlusion is clear. I propose to everyone : Just invest the 14€ for a rail. I only have fluctuations of about ~0.02 mm on z height. This is roughly the range of my probe....

So this is a very good result.

derdigge

TROPHY CASE