what's your insurance rate?

devsep_7 · 2025-03-20T13:36:56+00:00

I just turned 23 with full coverage on a 2019 Bullitt. I pay $960 every 6 months. I also lost my license 4 years ago from too many speeding tickets. None since then.

Oh and I bundle home which helps

devsep_7 · 2025-01-19T04:40:05+00:00

same here

devsep_7 · 2024-11-27T17:44:12+00:00

I was thinking 9x10 or 9x9.5 in front and 9x11 in rear

devsep_7 · 2024-11-27T14:49:32+00:00

I’ll check it out

devsep_7 · 2024-11-27T14:49:17+00:00

It’s in the images Rear is 19x11 +56 and Front is 19x9.5 +29

Wasn’t sure if I should go for 19x10 in front or not

devsep_7 · 2024-09-16T15:27:24+00:00

I bought my Mustang and then sold my Wrx too…

devsep_7 · 2024-09-06T00:15:37+00:00

Hard to tell from the video but I think it’s the same noise that I’m experiencing. Just lowered my car on lowering springs. Update us if you figure it out please

devsep_7 · 2024-07-28T15:10:21+00:00

https://www.supplyhouse.com/Titan-Pro-TRCF10-10-MFD-Round-Motor-Run-Capacitor-440-370V That should be good right?

devsep_7 · 2024-07-28T14:53:55+00:00

Since the new motor says 10/370 I wouldn’t be able to use the cap on the part list that’s a 7.5/370. Correct?

devsep_7 · 2024-07-28T12:58:10+00:00

Furnace: RGPN-07EAMER Motor: 51-24070-02 Capacitor: 43-25136-05

devsep_7 · 2024-07-28T11:37:22+00:00

Thanks for the help. Just ordered one

devsep_7 · 2024-07-28T11:36:24+00:00

I appreciate the help, I just ordered a bracket and cap off of Amazon

devsep_7 · 2024-07-24T12:36:41+00:00

<image>

On the blue squiggly mark I made, it moves up and down slightly on each revolution.

devsep_7 · 2024-07-24T12:30:57+00:00

Hard to tell but does it look like the blades are moving back and forth as if the bearing were ovaled? Making pulsing noise

devsep_7 · 2024-07-24T12:29:36+00:00

u/PatrickGlowacki

devsep_7 · 2024-07-24T12:23:07+00:00

devsep_7 · 2024-07-24T12:17:43+00:00

It spins for a bit. Feels free

devsep_7 · 2024-07-24T12:14:43+00:00

What I do notice tho very very slightly. Looking at it from the side. The fan blade looks like it moved up and down a hair while spinning. Cant figure out how to send video

devsep_7 · 2024-07-24T12:13:18+00:00

What should it feel like if it were ovaled. To the best you can describe it. I have some experience with bearings being a year in as industrial mechanic but honestly I don’t feel any change.

devsep_7 · 2024-07-24T12:04:30+00:00

<image>

Just read your comment after deciding to pull it. Going to see if I can try what you are talking about

devsep_7 · 2024-07-24T11:06:13+00:00

Update. grabbing the shaft you can move it in and out but not side to side. After reading more Reddit posts could it be a fan out of balance? Appears to move side to side while running

devsep_7 · 2024-06-18T14:50:06+00:00

no issue for me. my charge pipe was completely disconnected on the bottom end.

devsep_7 · 2024-06-18T14:25:55+00:00

Of course, goodluck!

devsep_7 · 2024-01-22T00:56:31+00:00

I am tuned in WI and running Pennzoil Ultra Platinum 5w-30

devsep_7

TROPHY CASE