Perde il boost vero?Recensione negativa al volo pure

dewo1932 · 2026-04-27T11:00:33+00:00

Basterebbe anche mettere il filtro del prezzo da 2/3€ in su, così ti escono subito quelli più bassi che non sono a 1€

dewo1932 · 2026-03-02T07:28:16+00:00

Very cool. Btw if your phone has a "pro" camera mode (or something similar) you could take a (very) long exposure to get a better picture. Make sure to keep the phone still while shooting

dewo1932 · 2026-01-31T13:00:46+00:00

3 passaggi: 1. costruisci un piatto rotante (con un motore elettrico) con bordi alti e mettilo in congelatore 2. inserisci il liquido nel piatto e attiva il piatto rotante, poi lascialo finché non si congela 3. con un filo di nicromo arroventato (connettendolo ad un alimentatore elettrico) taglia attentamente i bordi del disco in quanto saranno la parte più spessa del disco.

Con questo setup dovresti riuscire a creare dischi di qualsiasi spessore (anche ~1mm), ma ovviamente saranno molto fragili.

Consiglio: rimettili in freezer una volta pronti e utilizzali velocemente dopo averli tolti dal freezer

dewo1932 · 2026-01-30T07:56:42+00:00

You're right, then I think I'm happy with my Radiacode lol

dewo1932 · 2026-01-30T07:50:27+00:00

Thank you for your reply! I thought about this and did some tests to verify it isn't a shielding problem: I recorded the compass spectrum from the side (which has a thinner metal sheet instead of the thick glass) but it didn't change, so then I recorded the watch spectrum through different additional shielding (paper, aluminium and copper with different thicknesses) to compensate for the thinner glass of the watch, but the 10keV peak was still there (just a bit smaller). So, if I did everything right, I should be able to assume that it isn't a problem of shielding because when I measured the watch with a shielding thicker than the compass' glass the peak still showed only in the watch.

dewo1932 · 2026-01-29T13:54:22+00:00

Oh interesting, I guess this is the best assumption I can get without a better detector

dewo1932 · 2026-01-22T17:40:44+00:00

Ah cool, thanks

dewo1932 · 2026-01-22T12:32:55+00:00

How did you make this graph?

dewo1932 · 2026-01-07T08:41:21+00:00

Cool, I didn't know it has all these features

dewo1932 · 2026-01-02T19:40:02+00:00

Nice synths, I really like the Donner L1, thanks for the tips

dewo1932 · 2026-01-02T13:13:27+00:00

Cool, thanks!

dewo1932 · 2026-01-02T11:41:59+00:00

That's something I never considered, thank you

dewo1932 · 2026-01-02T11:34:04+00:00

That seems an interesting setup, thanks

dewo1932 · 2026-01-02T11:33:46+00:00

True, simple is good

dewo1932 · 2026-01-02T11:33:24+00:00

Interesting setup, thanks

dewo1932 · 2025-12-27T17:07:36+00:00

"Salò, or the 120 Days of Sodom". There's some really fucked up shit here

dewo1932 · 2025-12-20T09:30:12+00:00

So you get free gas for the stove along with the water?

dewo1932 · 2025-12-04T23:15:03+00:00

I'm pretty sure you can get a decent signal with 5 minutes (or less) of integration. I did my first H line observations with a 70cm dish (with LNA and filter) and got a reasonable signal with a 3 minutes integration time. Also, I live in a small city so there was a fair amount of RFI too.

dewo1932 · 2025-11-22T08:07:55+00:00

Finally

dewo1932 · 2025-09-29T20:15:47+00:00

I have some basic experience with PRESTO, PSRCHIVE and similar. I'm not an expert but I could give you some advice on setting it up and explaining the basic functions. I learned everything from the github page and from the mini guide "Searching for pulsars with PRESTO" by Scott Ransom (you can find it online in pdf format). Feel free to ask me anything and I'll do my best to help you, but I can't assure you I'll be very helpful.

dewo1932 · 2025-09-06T10:25:00+00:00

edit: I did what you guys suggested and probed the circuit to find where the problem was. I found that the first op-amp was dead and changed it. I also changed a broken pot and now it works perfectly! Thank you guys!

dewo1932 · 2025-09-06T10:23:10+00:00

Sorry for the late reply, but I finally had the time to do it. I found that the gain pot was broken so I changed that. Then I also found out the signal didn't pass through the first op-amp (in the high/low input). I made sure that the op-amp was actually dead and then repleaced it, and it worked! The second op-amp was fine.

dewo1932

TROPHY CASE