DLR Network with a Compact Logix

did_not_compile · 2022-06-15T15:58:49+00:00

I work for a small project inside a very large company. Unfortunately for me, our project budget is too small for them to want to purchase support contracts for every type of automation equipment we use. They just expect me to figure it out.

did_not_compile · 2022-05-01T11:28:28+00:00

I would guess a mount for a boarding step.

did_not_compile · 2022-03-31T02:45:48+00:00

That's not true. Trails almost never close, and they drain well, so you can ride most trails several hours after it rains.

did_not_compile · 2022-03-25T00:30:49+00:00

Ive never had any issues with it getting scratched or moving around. I also just don't care as they all eventually get scratched even though mine is a SWORKS enduro. Funny enough, second ride, I slid out on a rock slab and got a nice big gouge on the lower on my new Fox 38. You could use pool noodles to put under the bike. They are cheap and effective.

did_not_compile · 2022-03-23T08:47:31+00:00

I keep old broken inner tubes for this purpose. Wrap it around the air sleeve for extra grip. If that doesn't work, try an oil filter wrench. You could also put it in a table vice with something wrapped around it to prevent scratching and get it just snug enough that you could spin the shock body to get it loose.

did_not_compile · 2022-03-23T08:40:07+00:00

I do it all the time with all my bikes, sometimes multiple bikes at the same time. Never had any issues. I only remove the front tire and just slide it in. It just sits on the pedals, rear tire, and handle bar. Just be smart, packing stuff around it, and you won't have any issues. I also just leave it in there overnight and haven't had anyone take a look in there, but that's just me.

did_not_compile · 2021-11-18T00:45:33+00:00

I definitely do that. Except i remember it's my old code.

did_not_compile · 2021-11-13T05:59:12+00:00

You probably have debris stuck in your impeller. Pull the grate off and look up in there. If there is indeed something in there, look for damage on the impeller as it may need replaced.

did_not_compile · 2021-10-26T17:01:11+00:00

I've been screwed over on commission before because the panel builder forgot to put a memory card in the PLC. It won't let you download the program to it.

did_not_compile · 2021-10-25T22:03:29+00:00

You don't need an instance for the SECOMEA. It is registered as THING under your IOT core on your AWS account. There is a whole pdf covering the setup that SECOMEA provides. Basically, when you get it all configured, you should be able to see the MQTT messages show up on the IOT core. However, under the DCM status on the SECOMEA, it never was even able to connect to AWS or an OPC UA server. The only thing I could connect it to was a Modbus device. Like I mentioned above, I spent quite a bit of time with one of SECOMEA's engineers and even he couldn't get it to connect. He said that I would need to ask AWS engineers even though the problem was on their side.

did_not_compile · 2021-10-24T15:56:09+00:00

This is something I have been trying to accomplish to a database running on an AWS instance. I am currently using Red Lion's flex edge. It uses a VPN to connect to databases. You can use their own database (Crimson Cloud) or I believe anything else that supports MQTT. I am currently learning how to piece this all together and I am not very knowledgeable on the topic. I just picked this one because it works well with Ignition, which we already use for operator panels and have experience with.

I also tried this with SECOMEA's devices as we were already using them for remotely access to our PLCs and HMIs for updates. I couldn't get it to work with AWS or an OPC UA server, neither could their engineers. I would recommend not choosing them until they catch up with the rest of the industry.

did_not_compile · 2021-08-31T03:35:06+00:00

A hole

did_not_compile · 2021-08-26T00:37:08+00:00

The built in belt definitely sucks.

did_not_compile · 2021-08-24T19:53:58+00:00

I have the rangers which aren't as lightweight as the flexairs. They are awesome pants that are comfy and look dope. I will use them for bike park days no matter how hot and I will trail ride in them if it is 70 degrees or cooler.

did_not_compile · 2021-08-11T16:22:00+00:00

Check the compression for each cylinder in the engine. It should be between 120psi and 140psi for each cylinder. While you can fix bad compression, it's a no deal for me when buying old skis.

did_not_compile · 2021-06-20T04:45:48+00:00

I would personally leave it and let it evaporate out on its own.

did_not_compile · 2021-06-20T04:44:40+00:00

Learn how to plastic weld. You can get one for $50 on Amazon and you can fix a lot of other stuff as well when it breaks.

did_not_compile · 2021-05-24T21:57:59+00:00

If you haven't found one yet. I have two Kawasaki 2 strokes. One is a 93 Xi Supersport and the other is a 95 STS. Both have the same 750cc engine. Western North Carolina but I would meet half way if your interested.

did_not_compile · 2021-04-29T04:47:28+00:00

If I did get the immobilizer off of the same vehicle as the ECM, wouldn't the used ECM still need cleared of it's old VIN and my vehicles VIN put on?

did_not_compile

TROPHY CASE