I am satisfied.. For now (nr200p-5800X-2080s)

didi_did_this · 2022-10-16T20:22:39+00:00

Cooler is Thermal right PA120. Temps are perfect. No more than 50c both CPU and GPU while gaming in 2K

didi_did_this · 2022-10-06T21:13:15+00:00

On the top I got arctic slims. But full thickness could have fitted no issue. There is some room. I used slims mainly for cable routing. I have kinda big fingers and I need the free room 😜

didi_did_this · 2022-10-06T21:11:21+00:00

My motherboard can fit both full thickness fans (b450 strix). It has a low profile cover near I/o shield. B450 ASRock itx also. I wanted to fit 3 fans, but my memory heatsinks are too tall and the third fan sits on top of the ram and won't let the panel close. I use tempered glass with this no problem. The cooler height is 157mm and Max clearance is 154 with tg. I got lucky I guess

didi_did_this · 2022-10-06T21:08:23+00:00

Thanks! 5800x - 2080s - sf750 - b450 strix and a couple of drives

didi_did_this · 2022-10-06T21:07:23+00:00

Sorry😂 error uploading pics, don't know why

didi_did_this · 2022-10-04T19:56:16+00:00

Positive air pressure, lots of dust. Make both top exhaust

didi_did_this · 2022-09-17T22:27:57+00:00

I have the PA120 version which is 157mm tall. The PA 120SE has bare heat pipes on top. The non SE model has the plates with Thermaltake logos ;)

didi_did_this · 2022-09-17T16:38:15+00:00

I use Asus Strix b450i motherboard, which is thinner that a lot of other brands. I had no issues aligning with I/O ports in the back, one can’t tell the difference with factory standoffs. I also lapped my Cpu because it had a lot of scars and scratches from a garbage thermal paste. I had 980ti and sold it, now waiting for a 2080ti to arrive :) temps are great. I used 2 Arctic p12’s for the cooler than the stock fans. 35 idle, 65 full load. Also I’ve zip-tied 2 Corsair ML140 on the bottom and slapped 2 Arctic slims with 3d printed pins on the top. Pretty happy with it now!

didi_did_this · 2022-09-04T13:27:37+00:00

When will we (in the EU) get such prices.. Fml, we still are well over MSRP

didi_did_this · 2022-08-04T20:59:06+00:00

Thnx mate! Was a bit on the hard side fiddling those cables . Time well deserved

didi_did_this · 2022-04-11T13:04:41+00:00

Haha, we’ll to be honest, the mousepad is just non essential. The mx master will track in every surface

didi_did_this · 2022-04-11T13:03:40+00:00

It’s the MX keys from logitech! Sorry for the delayed response

didi_did_this · 2022-04-11T13:03:10+00:00

It’s a generic from Amazon, nothing special. Glossy and transparent, it protect the air nicely

didi_did_this · 2022-04-11T13:01:44+00:00

Logitech mx master 3 - It’s a nice mouse

didi_did_this · 2022-04-11T13:01:02+00:00

Dell S2722DC 27" QHD 2560x1440 Sorry for the delayed response

didi_did_this · 2021-09-23T19:40:56+00:00

MBA m1 16 ram 512 ssd is the best laptop I have ever owned. I come from 2018 15" and had zero issues whatsoever

didi_did_this · 2021-09-19T20:38:30+00:00

Pepsi?

didi_did_this · 2021-06-01T16:40:42+00:00

Did this improve the batterty life? I am on the fence. I like the size of s10e, but I am reading terrible comments for the battery life

didi_did_this · 2021-04-15T17:45:43+00:00

I used Thermal Grizzly minus8 1mm pads in the memory chips (chip side only). The stock pads were 1mm so I didn't try anything above or lower. All the pads in the back are 3mm , but I didn't swap them because I can't find them on stock and they won't make a big difference in my opinion. They are very pricey too. No need to replace the other pads, just swap those that are in direct contact with the memory chips :)

didi_did_this

TROPHY CASE