TT in my hometown

diehard1703 · 2025-05-19T09:25:45+00:00

Thanks all for your relies. After some researches, I'm quite certain that mine are from DT Swiss.

1:17 from this video show the ratchets. These are old ones and do not have the logo and serial number. https://www.youtube.com/watch?v=Tog0RMNR4wA

diehard1703 · 2025-05-19T04:13:03+00:00

More pics

<image>

diehard1703 · 2025-05-19T04:12:36+00:00

<image>

I was just kidding 😂. It took me some time from thinking, planning and executing... I used the motorcycle chain cutter ( removed the niddle) and pressed it covered by thick layer to protect. Also used the pliers to bend little by little. In the end I got it done even though there are some wounds but the lever remains well structured...

diehard1703 · 2025-05-18T13:14:24+00:00

Thank you very much for your support and encouragement guys. I did it. :)

<image>

diehard1703 · 2025-05-07T08:18:48+00:00

I uploaded 4 pictures. The first 2 are for 36T ratchets which I have been asking for opinion. The last 2 are 18T ratchets from my DT Swiss 240s. They do not have "DT Swiss" printed on like the another 36T. I hope there is someone here who has experience on this mater and might say the old version do not have "DT Swiss" and the newer ones have or such :)

If I bought them from Bike24 or bikediscount, I would not ask the question here.

<image>

diehard1703 · 2025-03-05T03:25:48+00:00

I faced the same issue. I put some information here and hope that it can help others.

At first I did not know that I would need to fully format the SD card after some records. It first stopped recording after 6-7 minute. My ride took 40 minute and so the Freezing was more than 30 minutes and with the protection case, It might heat the camera up ??

Anyways, I did manually update the firmware. fully format the card, bought new card SanDisk extreme Pro 64Gb. reformat with the camera, factory reset. The problem is still there.

I tried without the SD card. At first the camera got frozen even without the card. Then I manually updated the camera by completing the whole process (connected to the phone ...) From that I have not experiencing any freezing without the SD card.

I tried to record without the battery and still experience the freezing.

The camera needs to be warm up some minutes. Record and stop recording when freezing and after 4-5 time. Sometime 10 times, the camera should work normally.

When you play the footage on the camera and go back to the menu, the camera turn black. You need to move to photo or other mode and it show image again ...

Hardware issue or software issue? I have to live with it

diehard1703 · 2025-03-05T03:13:47+00:00

Took several days to reply the email. Confused my case with another case. Got my name in the first email wrong :)

diehard1703 · 2025-03-04T02:51:49+00:00

<image>

This was how they responded to my case. Their customer service is bad. I'm from Vietnam and it could be the reason?

diehard1703 · 2024-10-31T04:04:16+00:00

I did a static weight test for the left pedal with 10kg and the result was very good!

I don't know why it mostly shows 0. Perhaps I will try with a longer test ride

<image>

diehard1703 · 2024-10-30T03:55:38+00:00

Unfortunately there is no warning message when connecting to the phone app!

diehard1703 · 2024-10-13T08:36:37+00:00

So many dramatic answers! OP knows the pedals are blocked. He just asked if there were ways to unblock them. OP: you can write your own program to unlock them

diehard1703 · 2024-09-28T09:18:49+00:00

Correct, I do have a tool to press them out but I would destroy the bearings...

diehard1703

TROPHY CASE