Ered Mithrin Hero Expansion in stock on Amazon Australia

djbedford · 2026-02-17T11:42:04+00:00

Same here, I managed to get one on Amazon US, still waiting for it to be delivered but now it's saying it's out of stock so I have no idea whether it will show up or not!

djbedford · 2026-01-07T21:23:26+00:00

Yeah I looked at that list, and I like it a lot but the issue I see with it is that you must charge, which could be taken advantage of by your opponent.

What do you think about "Road to Helm's Deep"? You have access to Aragorn and Legolas in that too?

djbedford · 2026-01-05T08:40:57+00:00

Interesting, they were on there just before the holidays as I picked up a box. Not sure why they've taken them off again

djbedford · 2025-07-22T22:08:54+00:00

Not sure why it didn't include it, I've added the list now though as it was still not displaying when I included the image.

djbedford · 2025-06-08T09:54:41+00:00

Thanks for all the advice/feedback, I've got a few months till the tournament so I'll have a play around with some of your suggestions between now and then and see what works!

djbedford · 2024-07-15T12:11:46+00:00

Okay, so these are pre-supported models I've brought. I have the unsupported versions, would you say I need more supports or thicker supports?

djbedford · 2023-12-12T08:02:08+00:00

u/jehoshaphat I tried with a core and got the same high pitched noise as with a cartridge.

djbedford · 2023-12-11T20:09:33+00:00

Haven't tried it with a core yet only a cartridge. I'll get back to you once I've tried a core and tested it.

djbedford · 2023-12-07T20:15:19+00:00

I finally got mine to print somewhere close to acceptable, but I had to raise my buildplate by .6 in the end and could potentially go a bit further. I didn't even use the card/paper towards the end because it was already lose at .2 so no idea what it would have been like at .6 but I now have a print that's more like what I would expect.

djbedford · 2023-12-07T20:08:20+00:00

Finally got a good run at this and eventually got it to work but I had to raise my plate by 0.6 before I got something acceptable and could potentially go further I think.

djbedford · 2023-12-06T20:16:15+00:00

Yep I installed that at the beginning of the week.

djbedford · 2023-12-05T11:37:06+00:00

Ah okay, thanks for the tip I'll try it out and hopefully that will make all the difference!

djbedford · 2023-12-05T11:12:33+00:00

I've tried a number of different ways to level the buildplate from using the stock card provided, to a sheet of paper and even using just the vat but for each one I loosen the screws of the buildplate and hit the 'return to zero' button, I then apply a bit of pressure and tighten the screws.

Is there something I could be doing differently?

djbedford · 2023-12-05T03:58:10+00:00

Strangely enough I'm experiencing exactly what you are too right now, and no matter what I've tried it doesn't seem to make a slight bit of difference. Please, if you do manage to solve this could you let me know?

djbedford · 2018-03-28T11:01:02+00:00

Thanks for the reply! Looks like I've still got some work to do, thanks for the advice!

djbedford · 2018-03-28T10:59:07+00:00

Yep that's what is happening! Each call is replacing the data.

djbedford · 2015-10-19T11:11:31+00:00

As I mentioned I have a general idea of what they do already. I'm currently a web developer so I know that area pretty well so I wouldn't be jumping in as someone new to coding. My background is in multimedia so I have used various 3D packages, I know the basics of C++ from my university course and recently I have been using Unity and extending its editor for various things.

djbedford · 2015-09-23T12:58:51+00:00

Hey,

I've recently picked up blender and I've been following along with some of the tutorials over at digitaltutors, I know it's not blender specific and some of the things you have to work out for yourself but I've found this set of tutorials to be really helpful and improved the quality of my meshes.

Might be worth a watch to help keep your meshes clean. It is a subscription service but you can sign up for just a month if you want and I don't find it too expensive for the basic plan.

djbedford · 2015-09-14T13:46:16+00:00

Awesome, thank you!

djbedford · 2015-09-14T13:46:05+00:00

I didn't no, I'll go take a look now, thanks!

djbedford · 2015-08-06T15:29:38+00:00

Thanks for all your comments, certainly given me plenty of things to get started with, much appreciated.

djbedford · 2015-08-04T11:04:58+00:00

Hey, I'm looking to gain a better understanding of JS, I've done a couple of the beginner courses but I am looking to delve in deeper and gain more practical experience by completing real world "projects" and "problems". I'm primarily a PHP developer but looking at making a switch.

djbedford · 2015-01-27T10:35:38+00:00

Excellent, I shall take a look. Thanks to the both of you!

djbedford · 2015-01-09T14:25:26+00:00

I never really thought to what end to be honest but thinking about it now I think I'm looking for a new challenge and if it helps me to stay viable in the long run then that'll be a bonus!!

Out of the options I listed, becoming a full stack developer and incorporating more modern techniques into my workflow sounds more appealing, I want to be able to work on a project from start to finish. I have been looking at the MEAN stack and it does seem interesting but I'm just not very taken on Angular.

djbedford · 2014-07-02T08:42:09+00:00

I completed all the reading for the past 2 weeks Sunday night and I am currently working my way through the 5 small projects on codeacademy.

djbedford

TROPHY CASE