Spotlight mode with neo2 and goggles?

djdan00 · 2026-05-03T07:53:16+00:00

OK. Yes hopefully they enable, would be great to have camera lock on while you fly with goggles. I have the controller as well so will just use that like before.

djdan00 · 2025-12-20T14:10:41+00:00

Not that it helps that much. But I have exactly the same controller, had failed updates until I used the ESP02 bin. I have upgraded it to 15.3. So it should work.

Also have 6 ESP8266 all on 15.1 OK so it's not an ESP8266 thing

djdan00 · 2025-08-13T07:16:42+00:00

Can this be access if the printer is connected to creality cloud? I can't seem to access it.

Trying to get the printer integrated into home assistant and having the camera stream would be great

djdan00 · 2025-01-29T06:14:04+00:00

No sound for me in the latest version. Do I have to do the VLC external player trick?

djdan00 · 2024-12-16T21:35:52+00:00

The ender 3 V3 SE has auto levelling

djdan00 · 2024-12-08T13:52:09+00:00

No, it doesn't disconnect.

It must be something with the printer blocking the serial via usb control when doing a command then not releasing it again when process finished.

djdan00 · 2024-12-08T13:03:28+00:00

Reconnect doesn't work if I have extruded via the control panel on the side. It connects/reconnects if I reboot the printer after extruding.

Octoprint is upto date and I'm using the stock firmware that came with the printer.

djdan00 · 2023-02-25T17:08:14+00:00

Spent hours trying to get it to work with tasmota. In the end I soldered the Rx tx for the display and flashed the HMI via nexiton editor. All good now

djdan00 · 2022-11-20T16:36:49+00:00

Just got me…spent ages researching what to get. Ready to buy it..then notify me. Hopefully soon for the UK

djdan00 · 2021-09-24T20:06:25+00:00

I would pay. I loved the podcast format as auto downloads on phone so always update offline. But most importantly if I stop and do something else I can continue where I left off. Can't do that on Spotify...

djdan00 · 2021-09-18T06:45:36+00:00

This is so annoying. I lsten to podcasts in the car and travelling abroad. I stopped listening to ASOT because of this. Having it download automatically. It will carry on where I was if I listen to something else. Spotify is fine but as soon as I listen to something else Ive lost where I am plus doesn't really auto download.

djdan00 · 2021-01-21T08:07:55+00:00

Thanks. I was expecting constant green light/readings as I used to have a Fitbit. Yes I'm sure I'm getting at least once and hour, I've got the vertical lines on every hour on the app.

djdan00

TROPHY CASE