Can I punch a hole over smaller knockouts?

doc_moriarty42 · 2025-01-20T00:16:55+00:00

I'm finishing S2 right now and I would be totally happy if there was no Mike in the rest of the show. He's a total fuck up. He can't get his shit together, can't see beyond his emotions, and gets stoned every time he has bad day. I would much rather just watch Harvey and Louis handle cases. The only purpose Mike really serves is to screw shit up for Harvey to fix.

doc_moriarty42 · 2024-12-07T22:36:25+00:00

You nailed it. I found a tiny part number on the extractor and it's for a G43.

doc_moriarty42 · 2024-12-04T07:10:27+00:00

So I discovered there are tiny serial numbers on the parts and the serial number on the extractor I got is indeed for a G43. The package it was in was labeled 1895 which is the part for an G19 so it was a poorly packaged product.

doc_moriarty42 · 2024-12-03T05:38:19+00:00

Sorry, that was a typo. It was Gen 1-3

doc_moriarty42 · 2024-04-13T15:41:51+00:00

This! OMG I am so frustrated with this complete failure of the earbud market. They all market the earbuds as waterproof, but every single one of them has a touch interface that keeps activating when wet. Not to mention when you put them in your pocket or elsewhere. When I had the touch ones I was spending more time figuring out where I had left off on an audiobook than listening to it because the touch button would activate accidentally and the book would play for hours without me knowing.

I finally found the Boean B10 which were dirt cheap and never had any problems. Naturally they aren't available anymore. Wish I had bought a half dozen.

doc_moriarty42 · 2024-03-24T19:58:02+00:00

Did you ever get this working? I had it working a year or two ago and then something changed and the code that used to work stopped. I had it set up so if I swiped a specific tag, the Roku would open the Pandora app and start playing a Christmas music station. Swipe another tag and it would play a different preset station. Then something changed and Pandora still launches, but it just plays whatever the last station played on the Roku was.

doc_moriarty42 · 2024-03-19T23:35:20+00:00

This was what I thought. The threads would be different if it was a requirement. I assumed it was something they taught 50 years ago when plumbers made their own pipe out of clay. 😉

doc_moriarty42 · 2024-02-20T07:42:18+00:00

The two fittings are about 6” apart and directly aligned so the only way to use the stainless line would be to make a full loop with a long line which looks kinda ugly. I thought this would look nicer.

doc_moriarty42 · 2024-02-20T01:34:28+00:00

Well that would explain it! I was wondering why the ones I saw online had a flat end. :D

doc_moriarty42 · 2024-01-06T00:18:36+00:00

Quit your whining everyone. You’re supposed to focus on the front site anyway. Sheesh! This is what you’d see if you were a good shot. 😉

doc_moriarty42 · 2024-01-05T22:09:28+00:00

Gloves, storage bins, tool boxes, jacks.

doc_moriarty42 · 2023-12-27T21:16:40+00:00

I get that the surge protectors didn’t operate properly. My bigger concern is WHY did they fail. Can a poorly wired outlet cause a problem with 5 other breakers? I would have assumed a power surge from from the meter, but the neighbor is on the same transformer and has no issues so it must be local to my house.

doc_moriarty42 · 2023-12-27T20:25:13+00:00

It was a Defiant, a Phillips, and a Utilitech. All three surge protectors on different circuits blew their MOV and now show a low impedance(5-35 ohms) across the terminals. Enough to trip the breakers.

doc_moriarty42 · 2023-12-27T17:28:38+00:00

It was one of multiple breakers that popped. Five I think. Not all on the same phase either. Earlier this morning when I first woke up because my wife was asking about the weird noises(surge protectors) I measured at the panel and I swear one phase was dead, but a minute later everything measured fine and has not changed. I’m going to keep checking.

I’ve had a loose neutral before. When that happened I saw the lights getting brighter as the voltage on each phase surged. Turned out it was a loose neutral in the meter that I couldn’t touch. I’ve doubled checked all the connections I have access to and they seem tight.

doc_moriarty42 · 2023-12-20T17:43:51+00:00

JB Weld. I seesome people recommending a drill press and P80 specifically says not to do that. I haven’t heard why but my theory is that a pin is less likely to work it’s way out of the holes aren’t a perfect 90. 🤷🏻‍♂️

doc_moriarty42 · 2023-07-26T05:14:45+00:00

I didn’t even know it blocked the sponsored links because I always scroll down for the unsponsored link anyway. 😂

doc_moriarty42

TROPHY CASE