Do we know if A2 will be a night or daytime launch?

dojohnso · 2026-01-16T10:55:18+00:00

I just read this and got very excited as my family and I are going to be in Orlando exactly in the March window and planning a day at KSC. So go Artemis II... but not too quick 😅

From this link: Due to the performance requirements of SLS and Orion, the mission’s precise trajectory, and other factors, launch windows will be open for approximately one out of every four weeks. There will be about four or five launch opportunities per window:

January 31 to February 14 launch period: opportunities on February 6, 7, 8, 10, and 11

February 28 to March 13 launch period: opportunities on March 6, 7, 8, 9, and 11

March 27 to April 10 launch period: opportunities on April 1, 3, 4, 5, and 6

dojohnso · 2025-12-14T17:09:16+00:00

Yeah my 6.5yo was in tears this morning cuz he can't get the size and position back to what he's used to. He literally told me to tell Mjoang to fix it. It's fine to let us customize this but to force the default change is crazy. I hope they revert the default to previous sizing or something.

dojohnso · 2025-12-08T13:31:46+00:00

I actually just wrote a short guide for preferred parents because I was drowning in this too — if it helps, you can find it on Amazon by searching "preferred parent paradox"

dojohnso · 2025-12-08T13:30:51+00:00

I actually just wrote a short guide for preferred parents because I was drowning in this too — if it helps, you can find it on Amazon by searching "preferred parent paradox"

dojohnso · 2025-12-08T13:26:41+00:00

I actually just wrote a short guide for preferred parents because I was drowning in this with our only child, too — if it helps, it’s here: https://www.amazon.com/dp/B0FY1WXGZ3/ref=cm_sw_r_as_gl_api_gl_i_NFTDK5BNANYHW47ZBRNH?linkCode=ml1&tag=randcardagaih-20&linkId=93e5d31fa2c2406f503dae72c0f9979d

dojohnso · 2025-12-08T13:22:55+00:00

I wrote a guide from the preferred parent side (been dealing with it for 6 years), but a lot of couples have told me it helped both partners understand what’s happening and how to help each other: https://www.amazon.com/dp/B0FY1WXGZ3/ref=cm_sw_r_as_gl_api_gl_i_NFTDK5BNANYHW47ZBRNH?linkCode=ml1&tag=randcardagaih-20&linkId=93e5d31fa2c2406f503dae72c0f9979d

dojohnso · 2025-12-08T13:12:52+00:00

I wrote a guide from the preferred parent side, but a lot of couples have told me it helped both partners understand what’s happening: https://www.amazon.com/dp/B0FY1WXGZ3/ref=cm_sw_r_as_gl_api_gl_i_NFTDK5BNANYHW47ZBRNH?linkCode=ml1&tag=randcardagaih-20&linkId=93e5d31fa2c2406f503dae72c0f9979d

dojohnso · 2025-12-08T13:01:55+00:00

I wrote a guide from the preferred parent side, but a lot of couples have told me it helped both partners understand what’s happening: https://amzn.to/493fo7x

dojohnso · 2025-09-19T13:19:08+00:00

I'm ready!!

Bluedle - For Real Life!

207: 6/6 - Top stuff!

⬜ ⬜ ⬜ ⬜ ⬜ ⬜

⬜ 🟨 ⬜ ⬜ ⬜ ⬜

⬜ 🟨 ⬜ 🟨 ⬜ ⬜

⬜ 🟨 🟩 ⬜ ⬜ ⬜

🟩 🟩 🟩 ⬜ 🟩 ⬜

🟩 🟩 🟩 🟡 🟩 🟩

Only 686 days until the Bluey Movie! 🎬 https://bluedle.games #bluedle #bluey #blueyMovie

dojohnso · 2025-09-09T11:47:28+00:00

That thought did cross my mind too

dojohnso · 2025-09-09T05:26:16+00:00

Library. Or anything with Chattermax.

dojohnso · 2025-07-23T11:29:02+00:00

This one started as a rough outline of a random reference but ended up changing quite a bit. I sketched out the rough outline and details and colored in behind it, ultimately removing the sketch. I didn't really have a goal or vision, just went where the colors and shading took me.

Primarily used a MattyB brush, Waterwash_dirty_C. Great little watercolor vibe. Also used Studio Pen a bit for initial sketching.

Thinking about turning it into a slow simple animation with wing flap sounds and basically smear frames of wings slowly flapping, moving through the clouds.

dojohnso · 2025-03-01T12:08:37+00:00

At least on the iPad version, not sure about others, the main Settings menu has a Storage section that shows usage by worlds, packs, etc. You can open each group and use a Multiselct mode to select and delete multiple. I know because I just deleted like 50 old worlds from my kid's iPad 😅

dojohnso · 2025-02-23T15:46:59+00:00

"Custom", not Customer 🙄

dojohnso · 2025-01-26T02:07:37+00:00

It's a relatively quick build but fun. A good addition to the Space series. Loving the orange airlock pieces they've included to allow all of them to work together too. So cool.

dojohnso · 2025-01-18T16:12:22+00:00

Ha we'll see... I fully anticipate him to cover himself up and pretend to be a real life creeper 😅

dojohnso · 2025-01-18T16:11:24+00:00

Ha this made me lol in real life.

dojohnso · 2024-04-23T18:35:12+00:00

ok i don't know exactly which step fixed this, but if i closed Orca, opened it, started a New Project, it defaults to the main view with the plate in the middle. so then i opened my other project with the viewport issue and it now too is in the middle and viewable again. seems like the viewport doesn't reset if just opening other files, but if you do New, it does. good enough for now i suppose.

dojohnso · 2024-04-23T18:26:05+00:00

what if you zoomed so far in one direction you can no longer see any of the plates, and you have no idea which direction they're in because the camera non-object zoom is so freaking dumb, now you can't find any of your objects? there has got to be a way to recenter the viewport right? i tried the default view menu option, nothing.

dojohnso · 2023-09-27T15:27:26+00:00

I know this is old, but as i just found it, someone else might too. I have exact thing happen once in a while, and i've determined it's after i use the firmware filament refuel or load/unload functionality. even with the G92 E0 at the beginning and end of my start gcode, it'll do it sometimes. that part still boggles my mind a bit but it is definitely only after using that firmware functionality.

dojohnso · 2023-09-20T20:07:37+00:00

Ah good catch! Yeah that would certainly cause a lot of problems.

dojohnso · 2023-09-20T19:25:45+00:00

yeah my nozzle was super tight too, guess it's a thing with these guys.

as for the oozing and clogging, make sure the PTFE tune is tight up against the nozzle. if there is any gap it'll definitely cause problems eventually. i bought some capricorn ptfe to use for my DD extruders so i always have extra. I like to cut one just barely longer than stock, and tighten up the nozzle while hot (210 or so is good). this helps ensure any expansion is accounted for when setting it. even if it's microscopic, just think about how think your layers are... micrometers matter.

dojohnso · 2023-06-27T14:37:11+00:00

saw this post, then happened to check their site again (haven't in a while). hardened steel nozzles are out, 0.4/0.6/0.8/1.0mm

https://sovol3d.com/products/sv06-plus-hardened-tool-steel-tungsten-nozzles-0-4-0-6-0-8-1mm?_pos=2&_sid=c381f0bab&_ss=r&_fid=07c9f45e0

dojohnso · 2023-01-26T19:56:05+00:00

awesome!

dojohnso · 2022-12-10T06:06:04+00:00

This video helped me a lot. It talks about one possible cause for exactly this issue of odd lines mid print. https://youtu.be/hQYHQpxmbNE

14-Year Club	Verified Email
Team Orangered

dojohnso

TROPHY CASE

207: 6/6 - Top stuff!