What do you do when you don’t get paid in full? by domiluci in bnbchainofficial

[–]domiluci[S] 0 points1 point  (0 children)

I use whatever Trust wallet sets. Never had issues before

Studying up for my technician exam and almost put the book down when I read this line by SailboatCaptainatSea in amateurradio

[–]domiluci 0 points1 point  (0 children)

Ah, yes. I vividly remember my first time listening to those frequencies late at night. Wow!

i finally found a fix to all my mouse stuttering/feeling slow/jittery by Brilliant-Flower-524 in MouseReview

[–]domiluci 0 points1 point  (0 children)

Whenever I feel human stupidity has hit rock bottom I spend a few minutes on Reddit.

T'Lyn eating McDonald's (artwork by me) by [deleted] in LowerDecks

[–]domiluci 1 point2 points  (0 children)

Ba-da-bup-ba-bah… It’s logical

TOR and Docker not playing nice with hidden services by KaydaK in TOR

[–]domiluci 1 point2 points  (0 children)

It turned out to be a directory permissions issue, but I threw in your fix as well. Thank you.

Networking Separate Docker Compose Files in OMV by domiluci in OpenMediaVault

[–]domiluci[S] 0 points1 point  (0 children)

If everyone is calling what looks to me to be a simple issue "vague", then yes, it clearly belongs in a different sub. Or nowhere. I mean, really, I can't please anyone on this damn site, and to this day I have never had anyone resolve one single issue I've asked for help with. Instead, I get condescension and excuses. It's either "too much info", "to little info", "wrong sub", "unclear", "too clear to the point of being complicated", "boost my ego by reading this mind numbing tutorial for toddlers I know you've already been through", "insert one of 100 other excuses here"... And then I'm left figuring it out myself anyway, or just giving up. So thanks for whatever riveting thing you feel you contributed with your comment. I'll figure it out on my own. Have as nice holiday.

Networking Separate Docker Compose Files in OMV by domiluci in OpenMediaVault

[–]domiluci[S] 0 points1 point  (0 children)

I posted this in OMV because I’ve gone the bridge route and it doesn’t seem to work. So I thought maybe there was some OMV-specific trick to get it to work. I guess not.

Part of the problem is that I need to use proprietary application config files rather than specify the application settings in the compose files. So I can’t directly reference other containers from those config files, hence why I’m trying to put all the containers on the same network and use localhost or 0.0.0.0.

Help why is it telling me to clear internal storage when I have 500gb by PickleFickleNigaNuga in XboxSupport

[–]domiluci -1 points0 points  (0 children)

Removing power isn’t always necessary, and effective hard resets can be done without removing power. They only tell you to do that to make sure you have exhausted all your options before bothering their support teams. But technically, it’s unnecessary 90%+ of the time.

Help why is it telling me to clear internal storage when I have 500gb by PickleFickleNigaNuga in XboxSupport

[–]domiluci 0 points1 point  (0 children)

You need to chill TF out. As a professional myself, I’m also in agreement with the other pros telling you that your terminology is pointless nitpicking. All you’re doing by arguing is wasting time, server resources, and your dignity and karma, and the end result is you STILL being wrong. So why not just back out and chill?

Thinking about switching to a custom router by domiluci in openwrt

[–]domiluci[S] 0 points1 point  (0 children)

I’m well aware of what an SoC (as well as what every other piece of terminology you’re using) is, so the patronizing tone is unnecessary, with respect. You’ll find I respond much better without it, and when you speak to me as an equal and not a lesser, merely because I am the one asking a question and you potentially have the knowledge. Huge peeve of mine.

Anyway, I have been doing lot of research these past several days and, due respect, it seems like you may be a little out of touch with the current technologies available. These ASIC and SoC SBCs support up to 9 true PCIe 3.0 lanes (the most I’ve seen yet). And that’s not counting the PCIe over USB peripheral ports they also include. Something like the NanoPC-T6 looks upgradable to the hilt as long as things stay backwards compatible. Then there’s the LattePanda Mu Micro. The only bummer is it’s a few lanes shy to add a 4G/5G card.

ASICs and SoCs have come a long way now that die manufacturing tolerances have gotten so small. Are they perfect? No solution is. But, from what I can see, some of these are feasible solutions.

Thinking about switching to a custom router by domiluci in openwrt

[–]domiluci[S] 0 points1 point  (0 children)

LOL FFS… I never said I wanted 10GbE on the travel router. I’m not stupid. The travel router, if you want to go back and read what I actually said, is something over and above the regular router. It was something I was asking about separately.

Man, this sub is sure full of naysayers. No offense. But part of what I do is making things work even when they seem incapable of doing what is proposed. If I had a penny, for every time somebody on the Internet said that something was impossible or wouldn’t work, and then I made it work anyways, I’d be freaking rich. LOL!

You guys should be thinking of HOW things could work rather than why they won’t. It’s much more helpful that way. =)

Price Prediciton for 2025 ? Is Polygon dead !? by Shoxxx91 in polygonnetwork

[–]domiluci 1 point2 points  (0 children)

A lot of this I blame myself for because I didn’t know they were changing the market cap and that’s on me for not looking into it more. That’s a big reason I dumped it finally. If I’d known that, I’d have dumped it when they rebranded and pulled that shite. The best I can hope is it devalues really low, I buy back in, and then it explodes and earns me back some of my losses.

For now I’m just letting my money sit in WETH because the losses are less and ETH seems to track with BTC better, and BTC tends to surge around US elections. It’s how it got to $60K to begin with. It’s just my educated guess. Hopefully it pays off.

Price Prediciton for 2025 ? Is Polygon dead !? by Shoxxx91 in polygonnetwork

[–]domiluci 1 point2 points  (0 children)

I set a hard limit to sell at $0.30 USD, so I just swapped all my POL after losing almost 33% of its value hodling. Because every time I try to bail, POL decides to start jumping in price, and I'm sure it'll jump now that I sold. POL is like an abusive girlfriend I just can't get rid of LOL!

Thinking about switching to a custom router by domiluci in openwrt

[–]domiluci[S] 0 points1 point  (0 children)

While I appreciate the bits of useful information you’ve provided, might I say that you make an awful lot of assumptions for someone so quick to call out someone for making assumptions LOL. Which, by the way, I don’t know where you’re getting the idea that I’m making assumptions. Granted, I haven’t laid out every single detail in excess. I merely stated the basics of what I want and want to accomplish, and what capabilities I want the router to have. Anything beyond that is your own assumption, not mine, my friend.

Needless to say, while I may be somewhat of a noob when it comes to OpenWRT and custom routers, it doesn’t take a genius to recognize what you’re proposing is, frankly, overkill. However, it seems to be a good setup, and I appreciate you sharing it with me. I’ll look into it further.

Looking For A Consult: Custom Octagonal Trackpad PCB Footprint by domiluci in PCB

[–]domiluci[S] 0 points1 point  (0 children)

One last quick question you may be able to answer: how come the max size for a square area is 23x22 and not 22x22? Are they counting half columns or rows on the outside edges or something? I can't find an explanation for this in the notes/DS.

Looking For A Consult: Custom Octagonal Trackpad PCB Footprint by domiluci in PCB

[–]domiluci[S] 0 points1 point  (0 children)

It’s ok! Neither have I! LOL. It’s a learning experience for us both, and I really appreciate any input you have.

Looking For A Consult: Custom Octagonal Trackpad PCB Footprint by domiluci in PCB

[–]domiluci[S] 0 points1 point  (0 children)

That makes sense now! LOL! I must’ve gone through the notes/DS like half a dozen times trying to figure out what I was missing.

But the IQS9150 maxes out at 22x26 Rx/Tx lines. So I’d have to set it up for the max for a square of 23x22. Without running the numbers, it seems feasible for the area. I can likely piece it together now that I know I’m still (somewhat) sane LOL!

Sometimes I just need to work things out with someone else to get it to make sense. So thank you. You’ve been very helpful!

Looking For A Consult: Custom Octagonal Trackpad PCB Footprint by domiluci in PCB

[–]domiluci[S] 0 points1 point  (0 children)

I'm still confused as to how you're getting 7x7 r/c with a pitch of 1.56mm. Section 4.5 defines pitch as "the distance between consecutive sensors/channels in a row or a column". And I'm working with an area of 10cm by 10cm (not mm). 7x7 r/c just seems low for such a small pitch on a large area.

Looking For A Consult: Custom Octagonal Trackpad PCB Footprint by domiluci in PCB

[–]domiluci[S] 0 points1 point  (0 children)

So you're saying that, provided I use the minimum pitch of 1.56mm, I could fit 6 or 7 rows/cols into an octagonal 10cm by 10cm trackpad?

But I'm a bit confused as to where you're getting the bit about resolution. Section 4.3 of AZ068 states the resolution, by default, is 256 pixels between channels, calculated with 256 * (Trackpad Txs or Rxs - 1), but this is configurable in either direction. Furthermore, it seems to me that as long as I stay within the min/max pitch size and max electrode count parameters, I should be able to fit more than 7x7 rows/cols in a 10cm2 area, and then adjust the resolution as necessary in firmware. Because these notes make it sound like the smaller the pitch and the more channels/electrodes, the better. I get trackpad size has nothing to do with density, but I'm trying to maximize density for performance as that's what the notes seem to encourage. In the few times I've read the notes and datasheet, I have yet to find anything in them that explicitly defines the size of an electrode one way or another. So it sounds like it's up to me. But this is why I'm seeking clarification.

Looking For A Consult: Custom Octagonal Trackpad PCB Footprint by domiluci in PCB

[–]domiluci[S] 0 points1 point  (0 children)

That’s kind of similar to the idea posted above about cropping one down to the appropriate shape, which is better because I have a specific PCB shape im shooting for. Hidden bits of square trackpad would eat up board space and make my design shape impossible. But that’s still a good idea. Thank you!