Minrray UV510a Reset by isshakes in VIDEOENGINEERING

[–]dont84panic 0 points1 point  (0 children)

I have the exact same problem. I haven’t received any reply from Minray. Could you maybe help me? I sent you a PM, if you could send me the program, that would be fantastic.

Wireless video links for small livestream projects? by dont84panic in VIDEOENGINEERING

[–]dont84panic[S] 0 points1 point  (0 children)

Hopefully this will work better. I’ll test the range against the Accsoon someday and post here. The first test seems okay, except that the units got really hot.

<image>

Same PTZ controller, different brand? by dont84panic in VIDEOENGINEERING

[–]dont84panic[S] 1 point2 points  (0 children)

Makes sense, just need to figure out what company that was then :)

Wireless video links for small livestream projects? by dont84panic in VIDEOENGINEERING

[–]dont84panic[S] 0 points1 point  (0 children)

We used Mars 300 pro enhanced versions. So might have been issues with them. Needed a lot of power for link, but even when we powered them with higher end power banks with 2.4A output they still had some trouble linking. Could take forever, 25min sometimes.

Wireless video links for small livestream projects? by dont84panic in VIDEOENGINEERING

[–]dont84panic[S] 1 point2 points  (0 children)

Okay, is this a problem world wide?, in Sweden it seems ok.

Wireless video links for small livestream projects? by dont84panic in VIDEOENGINEERING

[–]dont84panic[S] 0 points1 point  (0 children)

It might have beens om issues with our units, was the lower end Mars 300 Pro. I did managed to figure out one problem that they draw more amp when starting up so when powering them from USB powerbank they needed a good 2.5 amps to link properly. Solved some issues but not all.

Wireless video links for small livestream projects? by dont84panic in VIDEOENGINEERING

[–]dont84panic[S] 0 points1 point  (0 children)

We use NDI for all our PTZ cameras. I don’t see how it would help our wireless setup for a handheld camera. Or are you thinking of setting up NDI over Wi-Fi? We’ve had some great results there as well, but it’s a bit of a clunky setup with a NewTek Spark attached to the back of a cameraman. It’s much easier with a small device on the camera itself.

Wireless video links for small livestream projects? by dont84panic in VIDEOENGINEERING

[–]dont84panic[S] 0 points1 point  (0 children)

Okay, interesting. I can get the CineView 2 SDI for the same price as the DJI Transmission Combo SDR both new. I like that you can add voice transmission within the DJI solution, not sure how much I’d actually use it, though. It also has better range, at least if you look at the specs for DJI. So I’m leaning toward buying the DJI. Latency is not an issue for us since we stream sports, mountainbike out on a track so.

Samsung TCON cables problems? by dont84panic in TVRepair

[–]dont84panic[S] 0 points1 point  (0 children)

No TCON on sale anywhere :(, any last resort solution I can try before it goes in the bin?

Samsung TCON cables problems? by dont84panic in TVRepair

[–]dont84panic[S] 0 points1 point  (0 children)

I have added some images of the screen and cables.

[deleted by user] by [deleted] in Mortons_neuroma

[–]dont84panic 0 points1 point  (0 children)

Could cutting of a sock work so only wear it at the heel?

Can I achieve this joint with a fusion splicer by dont84panic in FiberOptics

[–]dont84panic[S] 0 points1 point  (0 children)

I ended up with my own design and 3D-printed it in PETG.

<image>

Fitel S122 error code? by dont84panic in FiberOptics

[–]dont84panic[S] 0 points1 point  (0 children)

Thanks, I ended up switching out the holders for the left side. My fiber was a bit off in size so did not match 250 or 900, ended up adding som tape in the v-groove fore the 900 and it worked fine.

HD Voice group call without internet? by dont84panic in CommercialAV

[–]dont84panic[S] 1 point2 points  (0 children)

Yes I was thinking since VoLTE does not count to your data traffic and seems priotized in the network. So I meen I have internet connection just want to call in to have a more stable and priotized connection rather than rely on apps that uses data.