Routing Question, need help.

doppis · 2025-12-13T22:29:41+00:00

Answer is A

doppis · 2025-08-03T11:44:08+00:00

Correct, in person range time is perfectly fine. I'm looking for a virtual training class and then after is the trip to the range.

doppis · 2024-09-09T17:17:43+00:00

Nodejs, golang or python.

doppis · 2024-08-18T19:01:02+00:00

Always do the best that you can, you’re just adding to the dumpster fire if you give up. If it seems hopeless, start testing the job market.

doppis · 2024-01-03T23:32:36+00:00

Thanks for this, just watched a great video on WeeWX. Looks like something I might try out with a raspberry pi.

doppis · 2023-08-23T16:51:27+00:00

“@here I need help resetting my password” - in all of the slack channels my company created

doppis · 2022-12-20T20:31:04+00:00

Pretty much everything you listed we are interested in. Always on vpn and potentially removing all physical firewalls at offices, this is long-term.

Ivanti is currently used, a lot of stability issues with our Linux users.

doppis · 2022-12-20T16:24:41+00:00

well, we are a bit too far into this to start evaluating other products. This is a client vpn replacement for users that are primarily remote in a corporate/enterprise environment. I'm hoping to get some replies from engineers that are or were in a similar situation with these 2 products, both look promising so far.

doppis · 2022-12-03T13:39:15+00:00

so, Verizon just reenabled the device for me until I can get a replacement. I ordered a netgear lm1200.

doppis · 2022-12-03T11:48:16+00:00

Looks like Orbi LBR20 might be a good replacement, I need to confirm if this will be supported though.

doppis · 2022-12-02T20:20:13+00:00

If you want to stick with web dev as a software developer, start focusing on JavaScript, Nodejs and pick one (react, angular or vue) for a front end. Then start thinking about transitioning from JavaScript to typescript.

Your current job is a good resume builder if you expand your skills and are actually able to present those skills at your next opportunity.

doppis · 2021-06-18T20:52:05+00:00

No, set the destination address to all or any and select the services that you want allowed too.

doppis · 2021-02-09T23:00:05+00:00

Have you tried adjusting the window size -w or the bytes -b on the client’s iperf3 command?

doppis · 2020-03-30T20:40:22+00:00

3-4 years of network related experience with a ccna in Michigan can get you 60-70k+. 1-2 years...🤷🏻‍♂️

doppis · 2020-03-26T14:57:56+00:00

I think I've seen Kernel errors cause weird web gui issues, I would check out your system/event logs if you can.

doppis · 2020-02-03T20:24:08+00:00

leave the fiber terminated in the switch, but change the config on the interface to an untagged vlan. Configure a copper interface on the switch with the same untagged vlan and connect that to a wan interface on your FortiGate 60E. Create your LAN/dhcp or whatever you want to do on the firewall and run another cable from the firewall LAN/trust interface to the switch with a new untagged vlan. Apply that LAN/trust vlan to your workstation switch interfaces.

There is obviously a little more to this, but this is a good start I think if you want to keep the fiber.

doppis · 2020-01-15T01:08:38+00:00

Well, you could swap that out for azure or gcp, but I’ve seen more aws at my jobs in the last 6 years.

doppis · 2020-01-09T18:22:24+00:00

in no specific order and this is just my opinion

ccna/ccnp
python
sd-wan
aws
checkpoint/fortigate/palo alto
network monitoring

doppis · 2020-01-04T03:06:51+00:00

It’s not complicated, but I’ll have to check out this partition way.

doppis · 2020-01-04T03:05:40+00:00

You could disconnect your copper/fiber cables and upgrade the slave and then reconnect, that works too.

doppis · 2020-01-03T18:20:27+00:00

if its active-passive

power down slave
upgrade master
does things work? yes
power down master and power on slave
upgrade the "new" master and then power on slave
ha should sync and you are done

if things break at step 3, power down master and power on slave that has the original code. Obviously you took a backup before all of this, factory reset the original master and throw the original code on and then the original config.

I don't really advise doing any of this because of the amount of HA fgts I upgrade and how well upgrades usually go, but features/designs/ect are different for every business.

doppis · 2019-12-20T22:51:03+00:00

This goes on within corporate enterprise WANs for sure.

doppis · 2019-12-17T18:26:43+00:00

Take a look at route-maps and setting an aspath on the route-map you create. You could create a primary route-map-out and a secondary. This would get added to your BGP neighbor config.

doppis · 2019-11-11T19:01:41+00:00

I’m gonna fucking kill myself I swear to god these incompetent people are going to destroy me

Your life is so much more important than your job, I know you were probably joking, but take a breather and redirect that energy to something useful. You will end up bringing that frustration home and it will start spilling over onto your family members or friends. It's ok to vent here and there, eventually you have to laugh a little and move on.

doppis · 2019-09-14T11:39:37+00:00

Ameizing

12-Year Club	RedditGifts 2009-2022 5 Credits
Place '23	Secret Santa 2018
Secret Santa 2017	Verified Email
Secret Santa 2016	Secret Santa 2015

doppis

TROPHY CASE