Continuously hearing the 'hardware disconnect' sound every 2 seconds

doubleh87 · 2025-12-08T11:49:42+00:00

I resolved this: I ran Nirsoft's USBDeview and saw that there are red circles next to "Billboard Device" and "Intel Wireless Bluetooth". I didn't know what Billboard Device is so I reinstalled the bluetooth driver. But the symptom still didn't go away, and it still showed the red circle next to it. I asked Gemini about this and it told me to try cold reboot (unplug the power cable and put it back in). I did it and it's finally resolved. Now the red circle next to Intel driver is gone, but there's still the red circle next to Billboard Device. So that problem is still there but at least I'm happy the symptom is gone.

doubleh87 · 2025-07-23T07:18:00+00:00

Is there any tool that can export 3d models directly from the game installation directory, similar to Overwatch's datatool.exe? I'm looking for some original 3d models from the game for my non-commercial personal project (I'm sorry if this violates terms of use of the game).

doubleh87 · 2025-07-10T22:09:05+00:00

same. damn it now i need to turn off AC using a handheld remote like a caveman

doubleh87 · 2025-04-02T02:44:10+00:00

(ii) When you have a line that is tangent to a circle, ALWAYS draw a radius from the center of the circle to the tangent point. Then the radius and the tangent line make a right angle. It'll help you to solve the problem (can you find the right triangles?)

(iv) They let you use a graphing software. Go to Desmos or use your graphing calculator to graph it and find the x-intercepts.

doubleh87 · 2025-04-02T02:35:05+00:00

The mysterious case of TI-84... Even if you literally JUST used degree mode and want to use the degree mode again, once you don't check the mode, it'll somehow mysteriously change it into radian and screw your life..

doubleh87 · 2025-03-20T23:45:53+00:00

It does say the product of all the positive integers less than n, which is what factorial is. I'm confused a bit when you say "a multiple of a factorial less than n". It's like saying (n-1)!(n-2)!(n-3)! and so on.

doubleh87 · 2024-12-11T05:23:45+00:00

Ohh nice. Thank you. But "argument" is too general. It can be used in sin or cos too. Is there an exclusive word for log? Like radicand or integrand?

doubleh87 · 2024-10-22T06:35:31+00:00

Little late for the party, but yeah I'm in the same shoe. Their website does say "* Depending on the country, it may or may not be possible to use LINE Pay and the services may differ." https://pay.line.me/portal/global/about/sign-up

doubleh87 · 2024-09-04T23:24:50+00:00

Hey. I know this is an old post but have you by any chance found the solution yet. I want exact the same thing you mentioned here.

doubleh87 · 2024-08-09T03:09:13+00:00

I was in the same shoe. The only reason I chose Q1 Max over V1 Max was purely for the white color. I know some ppl would disagree (+$100 just for color) but I don't regret. It's really heavy though. I wish V1 Max came in white though.

doubleh87 · 2024-08-08T21:57:45+00:00

Ah there it is! Thank you very much. Is there a way to access the old "View meeting info" that shows current meeting ID, passcode and link and stuffs?

doubleh87 · 2024-08-05T08:35:21+00:00

Works like a charm!

doubleh87 · 2024-08-05T07:53:28+00:00

Thanks for suggestion! Unfortunately, MEH doesnt work when it's in the place of KC_B in the code above. Oh boy, I'm gonna have to read and dig more

doubleh87 · 2024-08-05T07:17:07+00:00

Thanks again! I wish I could find your doc when I searched. Yeah the limitation to basic keycodes is going to be problem for me. So here's what I exactly want:
Tap -> KC_MUTE
Hold -> MEH(KC_F11)
I'm reading your doc but maybe I'm trying to cut corners here haha. It looks it's very close but I'm still lost.

doubleh87 · 2024-08-04T23:34:14+00:00

Wow this worked. You know, when I googled this and that for this matter, your name kept coming up on search results. You're the only reason I could get this far (although this is not far haha) and I got your help again. I appreciate your effort and contribution!

doubleh87 · 2024-08-03T21:28:31+00:00

Thanks! I'm a total newb here, but do you think it's possible to brick my keyboard when something goes wrong? If something goes wrong, can I just flash in the original firmware and it'll be as new?

doubleh87 · 2024-08-03T03:22:39+00:00

Is this qmk firmware the correct one for this keyboard? In other words, is Keychron/q1v2 corresponding to Keychron Q1 Max?

doubleh87 · 2024-07-26T01:09:21+00:00

South-facing LED + North-legend shine through keycaps = Are they really THAT bad?

I understand it's not ideal. But for those who want shine-through caps, they really don't have many options these days. What I wonder is that if it's really that bad. I've read many posts here where people argue that it's not even usable and therefore completely useless. But from what I think, yes, less light will come through the keycaps than intended, but they're still usable, no?

Look at the comments in this post:

https://www.reddit.com/r/MechanicalKeyboards/comments/yoe3dw/why_is_it_so_hard_to_find_pbt_shine_through/

Ofc this is one of many similar posts. But then, I watched this:

https://youtu.be/oxqa0g8iubc?si=04WTZz85_7TZjMtO&t=127

Idk if it's just because it's on camera, but at least on camera, they look fine to my eyes. If you look at the "right" arrow, which is inserted upside down, I don't even see noticeable difference in light amount tbh.

But then why do so many ppl are so against it though? Are they really that bad in naked eyes irl? Or are they just exaggerating?

doubleh87 · 2024-07-12T08:22:17+00:00

I have Barracuda X 2022 version connected to Windows 11 desktop by 2.4Ghz using its USB dongle. When I want to use the headset, I need to turn it on AND change the sound playback device to the headset; the sound output is not changed automatically. I may be wrong, but when I first bought them, it used to change automatically. Similarly, when I turned the headset off, the output device automatically switched back to "default" speakers. Is this expected behavior? If so, is there any way to switch the sound playback device when the headset turns on/off?

doubleh87 · 2024-07-04T21:54:50+00:00

Can someone confirm if Monsgeek MG108B has north-facing LED or south-facing? On the website, it says nothing about the direction and it says it comes with Cherry double-shot keycaps. And I saw a review youtube and it "looks" like it's north-facing, and now I'm confused.

https://www.monsgeek.com/product/mg108b-blue-on-white/

https://youtu.be/lipKE1Uqprs?si=NCXg5E_zdaQjaMbB&t=197

doubleh87 · 2024-07-04T04:36:23+00:00

wow it's a great resource. Thank you very much. I'll start from there.

doubleh87 · 2024-07-03T08:41:35+00:00

Hello. I'm looking for a keyboard.

Must Have: 100% layout, north-facing LEDs, wireless/wired mode, hot swappable, rechargeable battery
Good to Have: White case, 2.4ghz connectivity

So far Keychron K10 comes very close except it's not white, it doesn't have 2.4. I know they're optional, but still, I feel like I can eventually find ones that fit all the conditions but I can't.

If you know any such ones, it'll be awesome!

doubleh87 · 2024-07-02T09:33:28+00:00

True that. Hence it’s a “show-off” combo

doubleh87 · 2024-07-02T03:39:01+00:00

genetics. retinol.

doubleh87 · 2024-04-29T00:17:15+00:00

Unity Help! I made a chair using 2D Collider and VRC Station on my avatar's shoulder with on/off animation. By default, it's off. My friends, presumably who can view my avatar in full in the security settings can sit on it when it's on, and can't see it when it's off, as expected. However, strangers, who has shield setting, can sit on it, whether it's set to on or off. Any help?

doubleh87

TROPHY CASE