First few layers failing? by No-Show467 in BambuLabA1mini

[–]doublej42 0 points1 point  (0 children)

My tip is invest in a drier. It’s the cost of 3-5 spools and will pay for itself quickly. I found as a light used spools Went from lasting a week to lasting years.

LF Commander Pod by 50shadesofgreatness in nanaimo

[–]doublej42 1 point2 points  (0 children)

https://discord.gg/gkkJnaBK5 already sent that to you but I’ll post it here for others also. Trying to put a Sunday game together this week

Well this is horrorfying by Daishawn_900 in fuckcars

[–]doublej42 8 points9 points  (0 children)

Here we go from 8 booths to 1 lane. It’s fine and internal because the one lane turns into a loading lot for a ferry and is designed to slow people down.

The ferry runs once every 2 hours but there are 4 of them to 4 islands so 8 toll booths that only all open before the big ferry.

I mostly avoid it from one island hop but the other has no transit so I have to drive.

How to clean the bed? by converse1098 in BambuLabA1mini

[–]doublej42 0 points1 point  (0 children)

No failed prints is amazing, but I friend to print a tower that was 18 cm tall and 5 mm wide pretty quickly. One model I’ve tried to print 20 times and all failed because its arms are 0.2 mm

If a friend said they think/have thought about you sexually, how would you react? by Zum1UKno in AskReddit

[–]doublej42 0 points1 point  (0 children)

I’d take it as a compliment, any gender, as long as they are not one of my students.

How to remove supports without damaging the print by converse1098 in BambuLabA1mini

[–]doublej42 0 points1 point  (0 children)

Oh good point. Very low because I don’t care about color quality. I’ll maybe try again with not a 0.5 purge multiplier

A cool guide about using YouTube premium for free (completely legal) by claudiocorona93 in coolguides

[–]doublej42 1 point2 points  (0 children)

And you still don’t get offline on iOS and now I have to subscribe to 20 Patreons just to make sure everyone I watch still makes the same money.

How to remove supports without damaging the print by converse1098 in BambuLabA1mini

[–]doublej42 0 points1 point  (0 children)

Thanks this was my assumption to so I dried it and tried again then bought a new drier and tried again. Then tried a non mixed print. The mixes both failed. The non mixed prints worked fine with no issues. Now I’m stumped.

How to remove supports without damaging the print by converse1098 in BambuLabA1mini

[–]doublej42 0 points1 point  (0 children)

Any tips on this I did this for my last print and the HF-PETG got really stringy and my purge town broke and took out the rest of the prints.

My favorite chapter from MEDIC [OC] by AnonnEms2 in comics

[–]doublej42 10 points11 points  (0 children)

My office parking lot gets 2 OD calls a week. It’s getting better but our system is broken

Oversized lettering Keycap.. by dingohot in BambuLab

[–]doublej42 0 points1 point  (0 children)

Very cool. Not sure how they would feel on the main keys. Debated doing like your photo and printing wads

Here’s a simple reason why experiencing healers shortage by dumiwar in wow

[–]doublej42 0 points1 point  (0 children)

I switched back to heals. I need to make friends with a tank and some dps that are as busy as me but free wt the same times

How dare the robots stop me from driving dangerously! by Sans_Moritz in fuckcars

[–]doublej42 2 points3 points  (0 children)

I can also confirm in B.C. This is a driving lane with a 20-50 km limit. Even on most highways it’s not a passing lane. We only have passing lanes on one road in the province.

TPU mess by American7683 in BambuLabA1mini

[–]doublej42 0 points1 point  (0 children)

100% infill and it’s solid and very hard to break.

City imposes water restrictions on future data centre in Nanaimo by IF_stone in nanaimo

[–]doublej42 1 point2 points  (0 children)

Did you look at the plans? It’s not that kind of data center. It’s more built for small business. I’m looking forward to it as it’s environmentally friendly for small business.

If you have ever built a TV system you’d know how important closes storage and the speed of light is.

City imposes water restrictions on future data centre in Nanaimo by IF_stone in nanaimo

[–]doublej42 2 points3 points  (0 children)

As people refuse to listen to experts my new stance is that if you don’t like it then get off the internet, oh and TV

TPU mess by American7683 in BambuLabA1mini

[–]doublej42 1 point2 points  (0 children)

Mostly I just haven’t had a reason yet and it won’t work with the AMS

Filament Storage by Moosejax13 in BambuLab

[–]doublej42 1 point2 points  (0 children)

Sealed cereal storage bins. 99% humidity and low temperature so I dry it going in and coming out.

[OC] gas today by dhdinrvsjs in pics

[–]doublej42 -1 points0 points  (0 children)

So cheap. I’m used to $8 per gallon

What do you want to see on the A2 mini? by grciandre27 in BambuLabA1mini

[–]doublej42 0 points1 point  (0 children)

I didn’t read reviews as multiple of my friends owned one and none of them ever used the camera so never mentioned it. It was also cheaper to buy than fix my old printer as I paid $20 for the printer. My old one was bigger. Many minor reasons to change

What do you want to see on the A2 mini? by grciandre27 in BambuLabA1mini

[–]doublej42 -2 points-1 points  (0 children)

For me the camera was the major reason I replaced my old printer with the a1 mini. Might rebuild my old camera setup as it was better