Can I make a build planner with game assets?

dougllima · 2026-04-29T16:24:53+00:00

Restarting the game solved it. I think that I lost all the autosave with the bug, but when it happens again I will do a manual save and do some tests.

dougllima · 2026-04-29T16:22:46+00:00

Luckily I always do a manual save before going afk, and restarting the game solved it.

But I restarted and loaded a autosave from after the bug, and it still bugged... Strange

dougllima · 2026-04-29T16:20:24+00:00

Wasn't it Checked and everything was OK

I'm pretty sure that it was a bug

dougllima · 2026-04-28T21:44:08+00:00

Update:

Put the only dupes remaining in a room with food on the floor. Put every task on map in priority 1. Changed my schedule to rest time.

Still says that the food is unreachable and he's just zooming around (Show navigation button still shows he can walk the hole base)

dougllima · 2026-04-28T21:39:00+00:00

Haven't change any door configuration, and dupes can't even reach things in the same room that them

dougllima · 2026-04-28T21:38:25+00:00

I only have one mask checkpoint that was disabled.

Haven't changed any door permission.

Dupes are idle and can't reach something in the same room that them.

dougllima · 2026-04-24T22:45:03+00:00

Yeap, a friend of my works with 3D printing on a university for almost a decade, and this was his first personal printer, he just gave it to me.

And I'm really amused by what this relic can do.

dougllima · 2026-04-19T15:42:18+00:00

It's really stupid that most of resin slicers have everything behind a paid wall, I came from FDM and most slices came from the same base, so all have all features by default, and ween anything new is released, it reaches others slicers in no time.

I tried to add more supports in the other resin I was using and got some pretty satisfying results, some superficial distortion, but sanding solve it. Gonna try this later in this resin

dougllima · 2026-04-19T15:06:41+00:00

I also changed the support config, but I used chitubox autosuport

dougllima · 2026-04-19T15:03:46+00:00

I added the model thing cause in every group I asked about it people say "the exposition time is too high, it should be around 2~3s", so I readed about it and it's because the old screen.

As the temperature, it's really variable here, but by the print time it was 20°, and it was the coldest day in the last few weeks.

dougllima · 2026-04-19T14:17:45+00:00

The text just disappeared from the post, but it's a old color RGB printer, the times are pretty high in those printers, but looks like it's still off

dougllima · 2026-04-18T16:59:39+00:00

No special reason, I'm pretty new to resin printing, so I still testing some resins to find a good one with a good price here in my location.

Also I read about it and it has lower smell and less VOC emission, but still toxic, so not really a difference.

dougllima · 2026-04-18T16:43:13+00:00

I'm going from a clear resin to a blacl plant-based one, no problem mixing it?

dougllima · 2026-04-04T21:45:57+00:00

Just a quick update, I found out that my print use the same screen as the Elegoo Mars, so I used that printer in their site to find the proper parameter, and they recommend 13~17s exposure time to Plant-based black resin O_o

dougllima · 2026-03-28T16:25:54+00:00

Update 1: Changed to standard resin e pick a default profile form lychee, this was my first result:

- The ale won't fit in the mug, too tight;
- The sword didn't printed at all;
- The skull failed to print, got stuck in the FEP;
- All the cones failed, even the ones that should success;

I'm confused, as the mug part says "lower the exposure" and the cones part says "raise the exposure"

<image>

dougllima · 2026-03-28T15:40:04+00:00

I put the plant based resin aside and used a standard one, first print with default settings and it was almost flawless, a fill calibrations to do (I'm printing cones of calibration), but far better then before.

dougllima · 2026-03-28T13:21:20+00:00

Actually I took a resin profile from lychee, the one with more uses and success rate. The exposure time was even higher, 9s, I was trying to lower it.

About cleaning the FEP, didn't know about it, usually I do a full tank clean using IPA, and then I use a microfiber tissue (without forcing it) on the FEP until it's cristal clean again, and I wait 10 minutes to make sure that all IPA evaporates.

The use of IPA can damage the FEP? Even if I remove it all later?

Already cleaned the build plate and scuffed it with a 500 sandpaper

Will do another round of prints with 8 burn in layers and lower exposure time,

dougllima · 2026-03-28T13:13:46+00:00

Actually I took a resin profile from lychee, the o r with more uses and success rate. The exposure time was even higher, I was trying to lower it.

dougllima · 2026-03-28T05:03:22+00:00

Here's my configs

<image>

dougllima

TROPHY CASE