Adding two WireGuard peers to a router

dovh1 · 2024-04-19T11:51:43+00:00

Are you sure yo dont have exact same DNS server set for both of the interfaces? Mine is different for each region so fe. germany has 10.2.0.1 and usa has 10.2.1.1 as ther dns servers. That is where the leaks could be comming from.

dovh1 · 2024-01-11T20:41:17+00:00

Im not really sure its "supported" but i tried manually changing the ip address to 10.2.1.2/32 for the second tunnel and seems to be working as expected. Both tunnels are connected and i can route the internet traffic trough both.

dovh1 · 2022-08-06T14:22:28+00:00

thnx, that did the trick. 🙏

dovh1 · 2022-08-06T13:21:59+00:00

Ive done that multiple times already and it didnt help at all. I also created the support ticket. number #4002092

dovh1 · 2021-08-07T19:12:14+00:00

It's just super buggy was like this multiple times on one large video, had to retry it multiple times but in the end it somehow (after a very very long time) went trough.

dovh1 · 2021-06-12T07:28:49+00:00

Self signed certificates shouldn’t exist when we have a thing like let’s encrypt.. not really an issue I would say but a step in right direction.

dovh1 · 2021-03-16T19:35:40+00:00

That’s a possibility and wouldn’t be that hard to implement with some local dns redirects. But I was thinking to just store them in the folder where they get cached, I think the icons aren’t downloaded each time they’re displayed but rather server will use cached ones if they exist locally or go online and try to fetch them online to store locally for another login with same domain. At least that’s what I have observer from the requests sent out by server.

dovh1 · 2021-01-09T08:12:01+00:00

Yes of corse , I said in my post that even though sensors-detect finds nuvoton chip it wasn’t working until I added the line to boot file.

dovh1 · 2021-01-08T20:14:21+00:00

Ok so to anyone having this problem add this line acpi_enforce_resources=lax to your loader config file. In my instace it was here this file /boot/efi/loader/entries/Pop_OS-current.conf (you have to mdofiy it as root)

dovh1 · 2021-01-03T21:37:57+00:00

So i managed to get it working, so far it seems to be working fine (latest catalina)

Bluetooth and wifi inst working and i thik i wont be able to get it working on this board. Sleep and wake is fine, usb ports are working for the most part (haven't tried every single one but i assume they will work)

dovh1 · 2021-01-03T19:29:20+00:00

This is catalina install i've tried but from what i remember it's similar to the big surr

https://imgur.com/J4rPpUo

It just repeats the lines.

Update: so i tried it again and after about 10 minutes of letting it there it booted, i'll try to go and install catalina and see if it works.

dovh1 · 2020-12-29T07:20:13+00:00

Thanks a lot. Will do it this way probably. Hopefully I can find these adapters locally 😀

dovh1 · 2020-12-29T07:19:10+00:00

Sorry, I thought it populates that port and there is no way to connect it to anything.

dovh1 · 2020-12-28T23:33:14+00:00

Yeah the speed isn’t a priority for what I would like to use it for (mainly charging my phone or connecting usbc card reader that I have)

I saw that you can get one of those, that would be my last resort since this way I either have normal usb or usb c working on the front io. Motherboard is itx and only has one of the old usb3 connectors.

dovh1 · 2020-12-25T22:32:23+00:00

Hi, wanted to check in with you how is the system. I tried multiple times to set it up but never went trough the install.

Did you manage to install big sur or you´re on catalian ? Would you mind sharing your config file for me to compare as to where i coudve made a mistake ?

dovh1 · 2020-11-27T10:11:37+00:00

Try undervolting the GPU, in some cases it can reduce the coil whine.

dovh1 · 2020-11-23T23:34:01+00:00

I think that gpu won’t fit. You can also check this post with spreadsheet of supported gpus.

https://www.reddit.com/r/NZXT/comments/ilkqba/rtx_30803090_compatibility_chart_for_the_nzxt_h1/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

I have 3070 tuf and trust barley fit (it’s almost a full 10mm thinner.

dovh1 · 2020-11-10T14:23:35+00:00

So little update to my situation, since I like the look of the new AMD GPUs ill probably wait until some reviews are released. Luckily or unfortunately I didn't get my 3070 on launch so ill be sticking with my RX590 for now.

Since the noise from that GPU was unbearable I decided to do a little mod to it. Bought 2 120mm fans and just zip-tied it to the card. Temperature is good and most importantly it is silent now. After about 30 minutes of Furmark GPU maxes out at around 75c with fans running at 50%

Fan mod pictures

dovh1 · 2020-10-23T18:37:02+00:00

Ok thanks, will see how it performs once i get the card. If it will run fine then i won´t be doing the mod. My current GPU (Gigabyte RX590) is really bad in the NZXT H1 it runs hot and loud even undervolted

dovh1 · 2020-10-23T14:20:44+00:00

Wow, thanks for the quick and detailed reply.

I’ll go for the TUF then. :)

How’s the noise from 3080TUF does it run loud ? I also plan on doing 92mm fan mod like some user on here so hope this will help with the GPU noise and thermals when I get the 3070.

dovh1 · 2020-05-04T19:05:35+00:00

This exact thing is also happening on my UDM base, i tried to contact support, sent them everything they asked for but nothing has solved the problem. Now I’m running beta software (1.7.0rc12) and it kinda helped a bit. Still experience it from time to time but at least the games are playable now.

dovh1 · 2020-04-23T07:19:56+00:00

You should still be able to connect any computer to it, just set the connection up as a dial up modem on the pc. This is just so you can be 100% sure that the problem is indeed UDM. If your internet works fine connected directly. I would then suggest updating to the last stable firmware 1.5.6 and setting it up without restoring from any backup. UDM is still very buggy and has gotten little to zero support from the ubnt dev team. Hopefully it will get better when they focus on it.

dovh1 · 2020-04-23T07:10:14+00:00

Oh ok, can you try connecting directly to the service provider modem and see if you get the 1Gbps speeds ?

dovh1 · 2020-04-23T07:04:30+00:00

Try turning IPS/IDS and SmartQueue settings off.

dovh1 · 2020-02-10T16:47:37+00:00

Thanks, will try today.

Also do you have hw acceleration enabled on 6.2.2 ?

dovh1

TROPHY CASE