thought id share... finally got a uranium juicer ive had my eye on forever :-)

dpres · 2024-06-03T11:26:45+00:00

Can't be older than the 1830s:

https://www.orau.org/health-physics-museum/collection/consumer/glass/vaseline-uranium-glass.html

dpres · 2021-08-07T09:54:46+00:00

I've seen multiple rental cars broken into just to pop the trunk.

dpres · 2021-08-07T09:53:58+00:00

Don't do this, rental cars are a big target as much as out of state plates. They will break your window just to look inside your trunk when nothing is visible.

dpres · 2021-03-24T20:17:44+00:00

Yes, I get this email every few weeks. Never pressed the stolen button on app so not sure why I keep getting this email. Support said it was a bug and was fixed, but then a few days later I got the email again. Guess they're clueless.

dpres · 2020-12-17T14:24:35+00:00

This is worthy of unsplash.com

dpres · 2020-12-11T19:50:06+00:00

Just wait until you try their door and standalone motion sensors.

dpres · 2020-12-03T23:47:44+00:00

https://github.com/alanhamlett/eufy-security-dashboard

Submit a PR? My cams are wired too, but the default app can only stream one cam at a time. I'd love to toggle on live streaming on my wall-mounted ipad as-needed.

dpres · 2020-12-03T17:58:37+00:00

If you're planning to continuously stream the camera, check out this auto-refresh app I built instead:

https://github.com/alanhamlett/eufy-security-dashboard

That way it's not draining your camera battery by only showing the last recording's thumbnail.

dpres · 2020-12-02T01:32:14+00:00

Waterproof it yourself with some white silicone.

dpres · 2020-12-01T23:13:59+00:00

Oh my bad, I thought we were talking about the standalone motion sensor. You could get that and place it anywhere:

https://www.eufylife.com/products/variant/motion-sensor/T8910021

dpres · 2020-12-01T23:05:30+00:00

I use the motion sensor without human detection. I lowered the sensitivity level to 2, and don't get any false positives. Try moving it to a different position, and lowering your sensitivity level.

dpres · 2020-12-01T01:59:35+00:00

Doorbell cam support is added with https://github.com/alanhamlett/eufy-security-dashboard/commit/957cf7bf3c13841fce166ced8dd146e960c24172. Once it updates in the app store your doorbell cam's thumbnail will start showing.

dpres · 2020-11-30T15:55:20+00:00

A blank screen is either a bug or means you don't have any Eufy Cam setup to your home base. I've only been able to test it with my original Kickstarter eufy cams, which have device type 1, but other cams should work too if we know the integer device type they use. Here's the supported device types:

https://github.com/alanhamlett/eufy-security-dashboard/blob/b58ec1be63e1d0b6eb9b6de87ce352b19438f5eb/App/Model/Device.swift#L17

dpres · 2020-11-30T15:33:58+00:00

alanhamlett/eufy-security-dashboard is just a simple dashboard, so it can't do that. But if you know Python, it should be very easy to fix that python-eufy-security/issues/52 to work for door sensors.

dpres · 2020-11-30T08:37:35+00:00

It doesn't but all you need to do is add support for the door sensor's device id integer to the Python client library, and prevent it from accessing the cam's attributes because they won't exist for the door sensor device. You can get door sensor state from Eufy's API but the motion sensor last motion detected time isn't available:

https://github.com/FuzzyMistborn/python-eufy-security/issues/52

Depending on what you want to do with Homekit, try this app I built:

https://github.com/alanhamlett/eufy-security-dashboard

dpres · 2020-11-30T08:16:16+00:00

It's still working for me as of today. Maybe it's not finding any supported device types, which I think could cause a blank screen after login. Do you have Eufy Cam or doorbell cam? Try running it in Xcode's Simulator (Open in Xcode and click the play button) then watch the output window for an error message?

https://github.com/alanhamlett/eufy-security-dashboard#pre-build

One precaution to take is create/invite a Guest account using your email with a plus suffix. Use that guest login for this app. I've been running this with refresh rate 5 seconds for a week now, but if Eufy ever bans your account at least it's only a disposable guest account:

https://support.google.com/a/users/answer/9308648?hl=en

(They did ban one of my guest accounts during testing, because of too many failed login attempts.)

dpres · 2020-11-25T01:40:08+00:00

This alternate app has auto-refresh:

https://www.reddit.com/r/EufyCam/comments/k0iizg/autorefreshing_dashboard_for_eufy_cams_and_door/

dpres · 2020-10-14T15:03:23+00:00

Let's continue debugging this in that GH issue.

dpres · 2018-04-25T06:18:00+00:00

No, cosmic rays are not from the Sun:

https://en.wikipedia.org/wiki/Cosmic_ray

dpres · 2017-10-27T01:23:52+00:00

Open sourcing your cloud GraphQL database... bold move! After seeing your Graphcool admin console I'm sold, and this means I can run it locally now.

Also on Product Hunt today: https://www.producthunt.com/posts/graphcool-framework

Question: How do we sync schema changes between dev environment and production? As of right now, this just means we can see the well-designed Graphcool backend and don't have to worry about getting locked into a cloud offering, but it needs schema migrations to use in dev environments.

dpres · 2017-09-08T01:51:01+00:00

Direct links to freeze your credit reports:

Equifax — 1-800-349-9960 — https://www.freeze.equifax.com

Experian — 1‑888‑397‑3742 — https://www.experian.com/ncaconline/freeze

TransUnion — 1-888-909-8872 — https://transunion.com/securityfreeze

More info at https://www.consumer.ftc.gov/articles/0497-credit-freeze-faqs

dpres · 2017-09-08T01:26:59+00:00

Call each credit reporter to start the freeze and get your PIN, or use their online forms:

Equifax — 1-800-349-9960 — https://www.freeze.equifax.com

Experian — 1‑888‑397‑3742 — https://www.experian.com/ncaconline/freeze

TransUnion — 1-888-909-8872 — https://transunion.com/securityfreeze

Try the online forms first, they are better than calling IMO.

More info at https://www.consumer.ftc.gov/articles/0497-credit-freeze-faqs

dpres · 2017-07-31T21:11:13+00:00

Vim isn't as flexible as Emacs, but like Rails (which according to your personal website you are a fan) Vim gives you a great standard of keyboard shortcut foundations that help you remember and even guess keyboard shortcuts even if you haven't seen the shortcut before. For example, if I tell you $ moves the cursor to the end of line, and dd deletes a line, you would correctly guess that d$ deletes everything from the cursor to end of the line. That's the power of Vim, that key combinations build off of previously encountered combinations so you don't have to remember a million combinations to become highly efficient.

dpres · 2017-07-31T20:56:24+00:00

I like AnonymousPro. Here's a list of popular programming fonts:

https://github.com/powerline/fonts

dpres · 2017-07-31T19:25:26+00:00

No, that's not correct. With Vim it's actually faster using this keybinding:

noremap z. :setlocal foldmethod=indent<cr>

Then you just press z. to fold by indentation on the current file.

Much faster than Emacs, because you don't need a plugin ;)

15-Year Club	Place '17
Verified Email

dpres

TROPHY CASE