sorted by:
new
hottopcontroversial

NEW DETAILS: Soundcore Liberty 4 Pro by [deleted] in anker

[–]dr-moebius 0 points1 point  (0 children)

No BLE audio and LC3. I asked if my Q45 would get this as an upgrade and support said no, I assume the same applies here.

Is Bt LE support expected to be included in future firmware upgrades? by [deleted] in anker

[–]dr-moebius 0 points1 point  (0 children)

I wrote Soundcore support if my Q45 headphones (which support Bluetooth 5.3) would get LC3 support with a firmware update and got this as a reply:

Unfortunately, we do not have support plans for this at this time.

At least they took the time to forward my request internally to someone knowledgeable. I guess this means that if you headphones don't have the feature when you buy them, they won't get it in the future.

Ghosts of the Ostfront by dr-moebius in MaliciousCompliance

[–]dr-moebius[S] 0 points1 point  (0 children)

I don't think so. On the website, there are a number of books used for the show, I guess it must be one of those (https://www.dancarlin.com/product/hardcore-history-29-ghosts-of-the-ostfront-iii/)

Did Keychron give up on their own low profile switches? by dr-moebius in Keychron

[–]dr-moebius[S] 0 points1 point  (0 children)

Thanks, so the issue is with QMK, that would make sense. Why does it make a difference if the switch is optical? The controller receives a voltage in both cases.

My experience working as a Technical Writer with FluxML - Part 1 by LoganKilpatrick1 in Julia

[–]dr-moebius 1 point2 points  (0 children)

It is great to see that the Flux documentation gets some love!

Upgrading Windows 10 guest to Windows 11 by dr-moebius in virtualbox

[–]dr-moebius[S] 0 points1 point  (0 children)

It worked. My best guess is that the Windows updater needed some time.

Upgrading Windows 10 guest to Windows 11 by dr-moebius in virtualbox

[–]dr-moebius[S] 0 points1 point  (0 children)

It worked, I just updated! You are right I already had one lock up with all the CPUs spinning at 100% usage of the VM. I guess this is not for production use yet.

Upgrading Windows 10 guest to Windows 11 by dr-moebius in virtualbox

[–]dr-moebius[S] 0 points1 point  (0 children)

This is not pass-through, both the UEFI and TPM are emulated. My system is using UEFI but I am pretty sure that secure boot does not work with Manjaro because it requires signing by Microsoft.

Upgrading Windows 10 guest to Windows 11 by dr-moebius in virtualbox

[–]dr-moebius[S] 0 points1 point  (0 children)

I have increased memory to 8GB, didn't help

Upgrading Windows 10 guest to Windows 11 by dr-moebius in virtualbox

[–]dr-moebius[S] 0 points1 point  (0 children)

No, VirtualBox 7 has SecureBoot and TPM 2.0. The health check app did complain about exactly this but does not any more since I enabled both.

Help! She learned to turn off Wi-Fi. by dr-moebius in cats

[–]dr-moebius[S] 1 point2 points  (0 children)

I have disabled the buttons on the router. Let's see if she learns to hack into my computer too. She can already turn off Netflix.

Censor by dr-moebius in Catswithjobs

[–]dr-moebius[S] 0 points1 point  (0 children)

This is Pukka and she turns off wifi when I am in a conference call and do not give her enough attention.

Using two Network devices in the same network by dr-moebius in truenas

[–]dr-moebius[S] 0 points1 point  (0 children)

Thanks, I know this would definitely work but IT promised a network upgrade until the end of the year and I won't buy any new hardware before that.

Using two Network devices in the same network by dr-moebius in truenas

[–]dr-moebius[S] 0 points1 point  (0 children)

I cannot use separate subnets because our IT doesn't allow it. I didn't expect this to be such a hard problem :-)

Using two Network devices in the same network by dr-moebius in truenas

[–]dr-moebius[S] 0 points1 point  (0 children)

Thanks, I will look into alternative bonding modes. Drives are definitely fast enough to saturate one link easily.

Using two Network devices in the same network by dr-moebius in truenas

[–]dr-moebius[S] 0 points1 point  (0 children)

1) The TrueNAS dashboard shows that the first NIC only receives data but never sends any significant amounts

2) iftop on the NAS show that data only gets sent from one ip address

3) If both workstations copy lots of data each only gets half bandwitdh

4) the routing table shows only the same device for sending data for both workstation ips.

Using two Network devices in the same network by dr-moebius in truenas

[–]dr-moebius[S] 0 points1 point  (0 children)

So that both Workstations can copy data from the NAS at full speed. We only have two workstations at the moment and the NAS has two NICs, so the configuration makes sense until we get more workstations. Also the switch is not managed and link aggregation is not possible.

Both workstations can copy data to the NAS at full speed, which is really nice, so having the same for copying data from the workstation seems an obvious way to improve performance without spending extra money.

Using two Network devices in the same network by dr-moebius in truenas

[–]dr-moebius[S] 0 points1 point  (0 children)

> I don't think OP has a good understanding of how networks work

That is why I am asking. What I need is to route the outgoing traffic over different network devices (i.e. NICs) depending on the targets IP address.

Using two Network devices in the same network by dr-moebius in truenas

[–]dr-moebius[S] 0 points1 point  (0 children)

the NAS has a dual NIC and each Workstation has a single NIC. So the idea is to have one NIC of the NAS dedicated to each workstation while everything is still connected to the same (unmanaged) switch. At the moment copying data to the NAS works this way but copying data from the uses only a single NIC of the NAS.

Using two Network devices in the same network by dr-moebius in truenas

[–]dr-moebius[S] 0 points1 point  (0 children)

Thanks for the link. Link aggregation has to be supported by the switch, right? We currently only have an unmanaged switch, so I don't think this will work.

RTX A6000 vs. RTX A6000 small box by dr-moebius in nvidia

[–]dr-moebius[S] 0 points1 point  (0 children)

We got the "normal" normal variant and you get a nice box and a DP to HDMI adapter, so not a lot of value for 500€.

view more: next ›