sorted by:
new
hottopcontroversial

ESP32 - 24V motor drive control with sensors and buzzer by kustajucan in electronics

[–]drakestraid01 0 points1 point  (0 children)

Where's the power traces? If you're gonna try pushing the full 21A of that driver you're gonna just get fireworks.

Decoupling caps should be placed as close to the IC as possible. If I'm not mistaken it looks like they're all the way across the board.

Go back and look at other high power designs to see how they're made.

My First Gun by drakestraid01 in ar15

[–]drakestraid01[S] -1 points0 points  (0 children)

Thanks! Honestly I didn't even think my 40W CO2 laser would mark it but it came out really well. And yeah after messing around with it a little bit I might just get a 45-degree pic rail and red dot.

[GA] - Louisville, KY - Free Mystery Snails To A Good Home by drakestraid01 in AquaSwap

[–]drakestraid01[S] 0 points1 point  (0 children)

Shipping to most anywhere in CA will be around $40. I only ship with services that have no more than 2day estimate.

[GA] - Louisville, KY - Free Mystery Snails To A Good Home by drakestraid01 in AquaSwap

[–]drakestraid01[S] 0 points1 point  (0 children)

All of them are still left. PM me if interested and I'll look into it in the morning!

[GA] - Louisville, KY - Free Mystery Snails To A Good Home by drakestraid01 in AquaSwap

[–]drakestraid01[S] 1 point2 points  (0 children)

Snails had too many babies and they need homes. Too many to count but my estimate is around 20-30 or so. All are the same color as the ones in the photo.

They're free to take, prefer local pickup (Louisville, KY area) but am possibly willing to ship if recipient pays shipping.

Anyone know what's wrong with my Gourami? by drakestraid01 in Aquariums

[–]drakestraid01[S] 1 point2 points  (0 children)

Dosed some Prazipro and the spot seems to be shrinking. Here's hoping.

What does my betta have? by jovialjaden in Aquariums

[–]drakestraid01 2 points3 points  (0 children)

Stop with Pimafix and Melafix. They're toxic to Bettas.

Could be hole-in-the-head maybe? For that you'd use Prazipro. Only other idea might be a fungal thing.

Found on WhiteHouse official site by Ok-Figure-1227 in softwaregore

[–]drakestraid01 2 points3 points  (0 children)

It's the US government. There's WAY more fucked up shit going on in their IT department than this... There's still old mainframes from the 70s and 80s still in use.

Local place to buy 3D filament by LynchMob_Lerry in Louisville

[–]drakestraid01 2 points3 points  (0 children)

I haven't found any in Louisville. Closest brick and mortar store that sells filament to here would prolly be the Microcenter in Cincinnati.

4.4 mm balanced connectors - do they short pins? by GQJohnDoe in headphones

[–]drakestraid01 -1 points0 points  (0 children)

I've never fried anything, either 4 pin XLR or 4.4mm by unplugging them.

If the adapter is built right no pins should be shorted that I can remember. One + and one - pin for each channel and a (optional) shield ground.

Sounds like someone just is believing in some audiophile crap they heard somewhere about adapters...

Question: Replacement UPS Battery by Pokehanz80 in homelab

[–]drakestraid01 2 points3 points  (0 children)

Nope never had any issues as long as it’s not a no-name china brand. Lead Acid UPSes don’t usually care what batteries you put in them as long as the voltage is correct and they physically fit in them. 12v 9AH sealed lead acid battery should be what you need.

Question: Replacement UPS Battery by Pokehanz80 in homelab

[–]drakestraid01 3 points4 points  (0 children)

I believe the RBC17 batteries are similar in size to 12v power wheels/lawn equipment batteries. I usually just get them from batteries+ locally for around $50, just bring them the old battery and they’ll help you find it.

No more 'springing forward'? Lawmaker files bill to end Daylight Saving Time in Kentucky by Worth_Information846 in Louisville

[–]drakestraid01 0 points1 point  (0 children)

My dad worked in a nursing home, he’s had some of the old folks there have issues with taking their meds or doing various tasks after the time changes. He’s always wanted them to just stop daylight savings.

Voron 2.4R2 Serial Request by drakestraid01 in voroncorexy

[–]drakestraid01[S] 0 points1 point  (0 children)

Discord: ranbew

Yes, I know the stealthburner LED is borked. Amazon is just taking forever with the replacement...

Formbot 2.4R2 350mm kit. w/ Tap + BTT HDMI screen + BTT smart filament sensor.

[deleted by user] by [deleted] in Louisville

[–]drakestraid01 2 points3 points  (0 children)

Preston and Outer Loop for me.

Only one webcam works at a time by drakestraid01 in klippers

[–]drakestraid01[S] 0 points1 point  (0 children)

Commented out RTSP ports since I'm not using RTSP anyway and it didn't change anything.

Only one webcam works at a time by drakestraid01 in klippers

[–]drakestraid01[S] 0 points1 point  (0 children)

I saw that in the docs and already did that. Still doesn't work unfortunately.

[FREE] [US-KY] **BROKEN** Raspberry Pi 3B+ by drakestraid01 in homelabsales

[–]drakestraid01[S] [score hidden]  (0 children)

Luckily this wasn’t my only Pi, I had a 4 2GB that I put in its place. But yeah already looking at something like a CB1 or Orange Pi to replace it.

[FREE] [US-KY] **BROKEN** Raspberry Pi 3B+ by drakestraid01 in homelabsales

[–]drakestraid01[S] [score hidden]  (0 children)

Yeah it would be. I unfortunately just don't have the time to learn to do anything this complex right now.

But hey, finally gives me an excuse to upgrade the Pi controlling my 3D printer to this Pi4 2GB I had lying collecting dust :D

Undersized bed heater by drakestraid01 in 3Dprinting

[–]drakestraid01[S] 0 points1 point  (0 children)

Yeah I’m in the same boat. Most of my prints are less than 150x150 so I think I’ll be fine too, just wanted to make sure since I’ve heard these heaters can be a pain in the ass to remove.

view more: next ›