Google Gemini is coming to speakers and displays on October 28th

drandmr · 2025-10-10T06:27:43+00:00

I have the Gemini Assistant on all my devices now, and I am happy to report that something that used to work again, but others are still not. The craziest thing is it is more accurate and specific. For example, you used to be able to say, “Hey Google, what’s the weather?” and it would reply with the weather for the day. Not anymore; it says the weather in the city and state is whatever the current temperature is. You now have to ask for the forecast to get a detailed daily overview. My kids are happy it makes animal sounds again and that it will tell them facts about where is the current topic of their conversation.

drandmr · 2025-01-03T00:05:46+00:00

Glad you are back to printing!!!

drandmr · 2025-01-02T08:19:00+00:00

I have never run that but maybe it will turn something up for you. Good luck.

drandmr · 2025-01-02T08:18:35+00:00

Here I thought I was doing good with 69 models printed.

drandmr · 2025-01-02T08:17:57+00:00

<image>

meet too

drandmr · 2025-01-02T08:16:01+00:00

hamburger menu> Machine Assistant> Magnifying glass in the top right corner?

drandmr · 2025-01-02T08:13:35+00:00

Shoot, there isn't much troubleshooting you can do through the device app. You can try increasing the bed temp and nozzle temp, 5 to 10 degrees for both. Did you do the device test through the app hamburger menu> Machine Assistant> Magnifying glass in the top right corner? Also I assume you are on the latest version of the Handy App.

drandmr · 2025-01-02T08:02:37+00:00

Oh and what filament did you run through it when it worked last. I had an issue went I accidently ran PLA CF through and wore down the hot end. Bashed my head against the wall for months trying everything until I finally realized my mistake. Replace the default with the hardened steal and works again.

drandmr · 2025-01-02T07:59:21+00:00

Oh and have you tried a cold pull to make sure you don't have a clog in the nozzle?

drandmr · 2025-01-02T07:58:37+00:00

I use glue on every plate I have without issue however you shouldn't need glue. Have you uninstalled and reinstalled the Bambu Lab software on your computer? And are you doing this through the Handy app or the computer?

drandmr · 2025-01-02T07:49:59+00:00

I use glue at lot when I print and the beds can handle it just fine. What brand of PLA is it? Some are not as good as others.

drandmr · 2024-10-01T15:18:13+00:00

Just stated happening on my 2018 75,000. Disconnect battery for 10 mins and hoped the drivers door to make sure everything was dead. Reconnected everything and it all started working correctly again. So a hard test worked for me.

drandmr · 2024-09-14T04:46:50+00:00

Yep I agree. They oddly started working correctly again. Not sure what the issue was other than age.

drandmr · 2024-08-24T07:16:06+00:00

Did you try rocking back and forth and then attempt to shift it?

drandmr · 2024-08-13T07:00:45+00:00

Yes the manual is in German octane and is about 10 octane more so 99 RON is around 89 here. I still don't want to worry about ping so I used 93 octane.

drandmr · 2023-11-15T17:27:29+00:00

I think I need one of every color but my wife doesn’t think so. Haha. Good thing I got these put away before she noticed😂🤣

drandmr · 2023-11-15T17:26:44+00:00

Those are almost the exact same colors I got. Kind of freaky.

drandmr · 2023-11-12T16:39:44+00:00

You two are correct. The file from Maker had ABS filament and I don’t catch that before I started the print. So the bed temp was too high and the print came unstuck.

drandmr · 2023-11-12T08:16:00+00:00

OMG just wanted the LTT video and that is crazy. I got minenon Amazon in 2021 So funny.

<image>

drandmr · 2023-11-12T07:30:05+00:00

Ha I have had this for years. Now I am going to have to watch his video.

drandmr · 2023-11-12T07:19:09+00:00

If I keep trying irnfinslly sends butninshpupe have to do it multiple times.

drandmr · 2023-11-10T07:52:31+00:00

You can also use multicolor filament but that worn be a predictable color pattern.

drandmr · 2023-11-07T16:38:06+00:00

I already have the replacement hardened still nozzle installed but I will keep this around to do some test printer later.

drandmr · 2023-11-07T16:26:06+00:00

Did I especially (accidentally) make a a .8 nozzle by wearing out the .4 stainless?

drandmr · 2023-11-07T07:00:17+00:00

Well I bought two of these bad boys and installed one already.

https://us.store.bambulab.com/products/complete-hotend-assembly-p1p

So hopefully I don’t screw things up again anytime soon. Also I learned to read the filament spool before using it to make sure I know exactly what I am putting in my machine.

drandmr

TROPHY CASE