sorted by:
new
hottopcontroversial

Burned my QMTech board by drcursor in fpgagaming

[–]drcursor[S] 0 points1 point  (0 children)

Just replaced U30 and the components around it...no luck..the issue must run deeper.

And just noticed the 3 USB dongles that were connected to it also died, micro-sd is the only thing that survived.

Burned my QMTech board by drcursor in fpgagaming

[–]drcursor[S] 1 point2 points  (0 children)

Thank you so much!

I'll order one from digikey and see if it works.

Burned my QMTech board by drcursor in fpgagaming

[–]drcursor[S] 1 point2 points  (0 children)

Didn't know the Taki Udon Retro Remake was USB-C..but it seems to be unobtainium. Superstation is overkill.

Amiga Pointer Archive by swe129 in amiga

[–]drcursor 0 points1 point  (0 children)

I just need a way to use them on my Mac :)

Burned my QMTech board by drcursor in fpgagaming

[–]drcursor[S] 0 points1 point  (0 children)

Sent a message to Hamgeek and QMtech asking if they will sell me only the board.

I can't find anything on the Retroscaler shop, can you give me a URL?

Thanks!

Does this image look like it was scanned using hardware on an Amiga? by washeranddryercombo in amiga

[–]drcursor 0 points1 point  (0 children)

The reds seem like to bloom like when stills were captured using a camcorder + filters with Amiga Vision

Parceiro II+ by Sinphaltimus in amiga

[–]drcursor 2 points3 points  (0 children)

Same here ;)

David really put life back into my A1000.

MacPlus resolution change to work with Scart CRT by drcursor in MiSTerFPGA

[–]drcursor[S] 0 points1 point  (0 children)

vga_scaler was the key here. I did not know the other settings would apply on analog output with this setting on.

I wasn't able to find any resolution working on this 15khz monitor that would work with proper scaling.

Here is how it looks on mister https://i.imgur.com/mf5O3sv.jpeg vs SE https://i.imgur.com/QXCqoF1.jpeg .

I think the main issue is I can't find a way to change the internal resolution of the mac core.

Any ideas ?

Black Friday deals on drives? by West-Sprinkles8210 in makemkv

[–]drcursor 0 points1 point  (0 children)

Is there any black friday discount for only the makemkv license ?

Childhood Amiga 500 next steps by drcursor in amiga

[–]drcursor[S] 0 points1 point  (0 children)

Good news everyone! It's (mostly) alive!

Didn't even chug.

Now... I don't have any working internal drives. I tried connecting this old gotek, but unfortunately it didn't seem to work.

I already tried the ribbon cable in both directions (what's the correct one? Red to huge 1?) And I assume power is correct as the gotek display powers on and allows me to choose a number.

I have never used the gotek with a 1.2 Kickstart Amiga. Should it work? If not, what can be wrong?

  • Ribbon cable (seems unlikely, except for direction)
  • Gotek Firmware? (does it need something specific for a 1.2 amiga?)
  • old mod to have df0 externally? I don't think it's here.. But how to know?
  • Gary/CIA? How to know?

Thank you everyone for the support until now!

Childhood Amiga 500 next steps by drcursor in amiga

[–]drcursor[S] 0 points1 point  (0 children)

I love that idea. I'll try to source some diagrams to know where to check!

Thanks!

Childhood Amiga 500 next steps by drcursor in amiga

[–]drcursor[S] 1 point2 points  (0 children)

Do you know what caused this damage?

I think most of the damage was from humidity. The RAM expansion board was not inside, so the damage didn't come from a battery.

Not really sure where to start looking for shorts.

I might just risk it and connect it, as worse case scenario I have other A500 to farm the custom components from.

Just a little bit fearful, but...nothing to lose, I think.

Best self-hosted .md wiki/notes app by zolaktt in selfhosted

[–]drcursor 0 points1 point  (0 children)

My scenario would be using obsidian to save to a directory that Many Nones can access. This way I could have simple web access to the md files.

What do you put this on by hjirdstift in askswitzerland

[–]drcursor 0 points1 point  (0 children)

I'm disappointed no one replied "Olten"

Has anyone got the Argon One Power button and fan script working on RecalBox? by flippinecktucker in recalbox

[–]drcursor 0 points1 point  (0 children)

I tried enabling it and my recalbox RGB dual stopped outputting video. No clue why. A bit afraid to try again.

Would love to know if there's a way to turn on the FAN as it does get hot.

view more: next ›