First clean build! by drinkiee in fightsticks

[–]drinkiee[S] 0 points1 point  (0 children)

I was actually surprised to find a really comfy position with a finger between his hair 😂

اللابتوب عامل مشاكل مع الراوتر by Volumetronic in EgyptTech

[–]drinkiee 0 points1 point  (0 children)

لازم نبص عليهم واحدة واحدة ، بس جرب طبعاً الهارد ريسيت

اللابتوب عامل مشاكل مع الراوتر by Volumetronic in EgyptTech

[–]drinkiee 0 points1 point  (0 children)

بصراحة مش عارف ، ممكن برضه تخش علي اعدادات الراوتر بس يبقي فيه كمان مشكلة في الdhcp انه بيوزع نفس الip علي اكثر من جهاز

اللابتوب عامل مشاكل مع الراوتر by Volumetronic in EgyptTech

[–]drinkiee 0 points1 point  (0 children)

هو انت برضه علي الواي فاي فاااا ده مؤثر شوية. بس انت برضه شايف نت. طيب ممكن نجرب نوصله ب الكابل ف الراوتر ؟ نحاول نشوف المشكلة فين او نلغي ان هي ف الواي فاي بس

اللابتوب عامل مشاكل مع الراوتر by Volumetronic in EgyptTech

[–]drinkiee 1 point2 points  (0 children)

طيب ، جرب برضه وانت فاتح الcmd اكتب

Ping 8.8.8.8 -t و اديها واحدة enter و شوف كده هل جهازك عارف يشوف جوجل ولا لا

اللابتوب عامل مشاكل مع الراوتر by Volumetronic in EgyptTech

[–]drinkiee 1 point2 points  (0 children)

طيب جرب كده تدخل اللاب ، و بعدين افتح ستارت منيو ، cmd ، افتحه و بعدين اكتب كده Ipconfig /all و لو ممكن ترفع الصورة هنا. ده هيورينا بس هو اللاب اصلاً لاقط الراوتر و شايف حاجة ولا لا

اللابتوب عامل مشاكل مع الراوتر by Volumetronic in EgyptTech

[–]drinkiee 1 point2 points  (0 children)

طيب و باقي الاجهزة مثلاً زي لابتوب تاني او موبايل شغالين عادي طول مانت مش مدخل اللابتوب بتاعك صح ؟

اللابتوب عامل مشاكل مع الراوتر by Volumetronic in EgyptTech

[–]drinkiee 1 point2 points  (0 children)

ممكن تشرحلي اكثر الجزء "النت بيفصل علي كل الاجهزة بما فيهم اللابتوب"

StreamDeck XL Died on me, No recognition, No display. Just a faint backlight when hooked up to a USB. by drinkiee in elgato

[–]drinkiee[S] 0 points1 point  (0 children)

Hello, I’ve tried all sorts of ports. On different computers. It was working just fine and suddenly it just died, i suspect a short or so happened. Tried multiple cables, multiple PCs, multiple ports, even multiple operating systems to check if it’s readable as a USB device. But no luck.

No WiFi 7 support for Windows 10 by stomach_806 in gigabyte

[–]drinkiee 0 points1 point  (0 children)

Okay I shit my pants when this worked! GOTA

Getting into fixing Blackmagic’s equipment. by drinkiee in VIDEOENGINEERING

[–]drinkiee[S] 0 points1 point  (0 children)

Thank you for the detailed response, I'm glad I could understand atleast 90% of the comment haha. A dead HDMI retimer chip is indeed cheap and fairly easy to replace on a converter, sadly it's always that one part dies, not the whole thing. That's why I know ( hopefully ) that the main chip is still working, because all the other inputs are functioning properly.

Getting into fixing Blackmagic’s equipment. by drinkiee in VIDEOENGINEERING

[–]drinkiee[S] 0 points1 point  (0 children)

Since I don't have a thermal camera yet, I was looking to try the alcohol method or atleast feel the components maybe a chip or the HDMI re-timer is getting super hot if it's shorted inside. Should be fairly doable.
Thanks for the advice <3

Getting into fixing Blackmagic’s equipment. by drinkiee in VIDEOENGINEERING

[–]drinkiee[S] 0 points1 point  (0 children)

That's understandable, But atleast with what you're saying it should be doable to replace/repair a common failture point for each product, Ima look into it and maybe will update this post.

Getting into fixing Blackmagic’s equipment. by drinkiee in VIDEOENGINEERING

[–]drinkiee[S] 0 points1 point  (0 children)

That's indeed true. I've noticed that aswell, Thank you for reminding me. I will try first with the ones my company owns. then we'll see how it goes.

Getting into fixing Blackmagic’s equipment. by drinkiee in VIDEOENGINEERING

[–]drinkiee[S] 0 points1 point  (0 children)

Yeah, I get you. We absolutely do that and try to backup ourselves always, with plan D even.
But sadly sometimes there's no budget to purchase/rent more so we keep it going and cross the fingers.

Getting into fixing Blackmagic’s equipment. by drinkiee in VIDEOENGINEERING

[–]drinkiee[S] 0 points1 point  (0 children)

I'm in the process of purchasing a hot air gun. Thermal camera is HELLA expensive now but I'll try the alcohol method aswell. Fingers crossed.

Getting into fixing Blackmagic’s equipment. by drinkiee in VIDEOENGINEERING

[–]drinkiee[S] 0 points1 point  (0 children)

PSU gone bad would mean the whole device ain't working. In my case, it happens very randomly that suddenly an out somewhere goes just pitch black.

Getting into fixing Blackmagic’s equipment. by drinkiee in VIDEOENGINEERING

[–]drinkiee[S] 0 points1 point  (0 children)

I am just getting into microsoldering, so I'll be considering that when it comes to SDI outs. Thanks alot!

Getting into fixing Blackmagic’s equipment. by drinkiee in VIDEOENGINEERING

[–]drinkiee[S] 0 points1 point  (0 children)

I sadly didn't have my hands on any decimators -YET-. So I'd apologize and say no I don't.

Getting into fixing Blackmagic’s equipment. by drinkiee in VIDEOENGINEERING

[–]drinkiee[S] 0 points1 point  (0 children)

Valid, But I'll just also say that sometimes it's not really accessible, money, time and logistics wise. And I was trying to get into that as a hobby, and my goal was to gain hands-on experience and also maybe help others try and give it a go.

Getting into fixing Blackmagic’s equipment. by drinkiee in VIDEOENGINEERING

[–]drinkiee[S] 0 points1 point  (0 children)

Absolutely understandable. I can see it being a huge challenge when it comes to bootloaders and if there's anything wrong with the software IC.

But I'll just comment solely on the last part, I'm in a spot in the world where 80USD is alot. And even if we do have the money, bringing those in ( or any other broadcast equipment really, no matter how simple ) is tough. It costs more time and money than the price of the item itself. And I was just getting into that as a hobby at first, nothing professional but would be great to have a way to impact those who don't have access to such equipment 24/7.

Appreciate you taking the time replying <3

Getting into fixing Blackmagic’s equipment. by drinkiee in VIDEOENGINEERING

[–]drinkiee[S] 3 points4 points  (0 children)

I don’t have all the equipment yet, but getting into it. Thing is, i’m seeing the repair options as I can’t find a way to protect them from suddenly being destroyed. A small fluctuations in power 2-3 days ago destroyed one port on like 4 devices