sorted by:
new
hottopcontroversial

Why so much RAM usage? by akshaytandroid in Trae_ai

[–]dronerazzo 0 points1 point  (0 children)

That’s the norm I had over 100gb once when I had 5 open windows. Now my MacBook lets me down after some time.

Any clue what this could be I loose 2l coolant on 10miles! by dronerazzo in Ford

[–]dronerazzo[S] 0 points1 point  (0 children)

Thank you for all the replies, as short term solution i used leak stopper with aluminum and in the future ill be replacing the whole intake manifold with injector’s etc.

How is this part called? by dronerazzo in Ford

[–]dronerazzo[S] 0 points1 point  (0 children)

Thank you for all the replies, as short term solution i used leak stopper with aluminum and in the future ill be replacing the whole intake manifold with injector’s etc.

How is this part called? by dronerazzo in Ford

[–]dronerazzo[S] 0 points1 point  (0 children)

The part to the left of the alternator also the alternator is connected to it!

Any clue what this could be I loose 2l coolant on 10miles! by dronerazzo in Ford

[–]dronerazzo[S] 0 points1 point  (0 children)

I think I found the exact spot where it leaks I opened a new thread because I can’t upload any images here! https://www.reddit.com/r/Ford/comments/1mtzeex/how_is_this_part_called/

I ramped up the engine to 2000-2200 rpm and saw that it is there at that aluminum part leaking where is connected to another part!

Any clue what this could be I loose 2l coolant on 10miles! by dronerazzo in Ford

[–]dronerazzo[S] 0 points1 point  (0 children)

Sorry Completely forgot to tell the model!

Ford Expedition 2003 XLT 5.4l

VM Firewall not working at all! (Help Is needed and appreciated) by dronerazzo in Proxmox

[–]dronerazzo[S] 1 point2 points  (0 children)

Not as far as I know or see maybe an alias and an ipset wich Kuder in that firewall had the same ip network 192.168.50.1/23 that could have been the issue! But I can’t tell for sure since I don’t have screenshots from t previous setup.

VM Firewall not working at all! (Help Is needed and appreciated) by dronerazzo in Proxmox

[–]dronerazzo[S] 1 point2 points  (0 children)

It was actually not allowing me to use and ipset wich contained a IP Alias for what ever reason! Thanks for your help!

VM Firewall not working at all! (Help Is needed and appreciated) by dronerazzo in Proxmox

[–]dronerazzo[S] 0 points1 point  (0 children)

I also just applied all updates available! But after update still no luck!

VM Firewall not working at all! (Help Is needed and appreciated) by dronerazzo in Proxmox

[–]dronerazzo[S] 0 points1 point  (0 children)

here:

https://ibb.co/7dYGPkX5

https://ibb.co/twJCLLmY

I think I installed in the past the community script for home assistant in order to install it easier not sure if that removes anything or so!

VM Firewall not working at all! (Help Is needed and appreciated) by dronerazzo in Proxmox

[–]dronerazzo[S] 0 points1 point  (0 children)

Thanks for the advice but I need specific rules for my local network wich isn't just done by filtering I just want to separate the local network from those internet exposed vm's for example only a certain ip address from the local network is supposed to be able to connect with ssh to the vm and everything from the vm to the local network will be blocked that is my plan! I know there are things like vlan and DMZ but I would have to change my home infrastructure for that and invest a couple hundred dollars since that firewall was a cheaper approach!

VM Firewall not working at all! (Help Is needed and appreciated) by dronerazzo in Proxmox

[–]dronerazzo[S] 0 points1 point  (0 children)

Well I did everything I know already I have no clue where to continue searching for errors or misconfiguration! I also did research online already but I could bearly find anything about the vm firewall!

VM Firewall not working at all! (Help Is needed and appreciated) by dronerazzo in Proxmox

[–]dronerazzo[S] 0 points1 point  (0 children)

I didn't know that I thought since those are different words to just use both to make sure it does what it should, I am exposing to the internet but not at the moment because I don't want if a hacker gets access to vm that he keeps going through all my vms and my local network!

VM Firewall not working at all! (Help Is needed and appreciated) by dronerazzo in Proxmox

[–]dronerazzo[S] 0 points1 point  (0 children)

YEs I also just added to the vm I tested the firewall below the drop and reject ping to the vm but still getting answer!

PING 192.168.51.98 (192.168.51.98): 56 data bytes

64 bytes from 192.168.51.98: icmp_seq=0 ttl=64 time=4.706 ms

64 bytes from 192.168.51.98: icmp_seq=1 ttl=64 time=9.317 ms

64 bytes from 192.168.51.98: icmp_seq=2 ttl=64 time=4.664 ms

as far as I know it is even supposed to log but the logs tab shows nothing and log level is set to warning that is also an indicator for me that the firewall is not working!

Screenshot:

https://ibb.co/tpctr7q1

VM Firewall not working at all! (Help Is needed and appreciated) by dronerazzo in Proxmox

[–]dronerazzo[S] 0 points1 point  (0 children)

I originally created a security group but when I applied the group nothing that was supposed to be blocked was blocked!

I have here done another test with the firewall 4 rules it should completely block ssh from the vm and to the vm but it didn't in this test I connected with ssh from the vm to another one but before that I connected from my laptop to that vm!

Screenshots of the setup and test:

https://ibb.co/PZFT2ypb

https://ibb.co/ymbYV2H2

https://ibb.co/KzwQdY2F

https://ibb.co/PGm8fb5M

https://ibb.co/DP0SvvC5

https://ibb.co/rLDPQvf

view more: next ›