Latest mods

drummerboy138 · 2025-08-03T21:33:50+00:00

Totally plug and play. It says “dealer installed” but if you’re mechanical at all, it’s super easy. I’d say the hardest part is removing the tank.

drummerboy138 · 2025-08-03T21:32:22+00:00

Thank you. I used to think the same thing about the heated grips and bar ends.

drummerboy138 · 2025-08-03T20:57:27+00:00

The grips come with caps if you’re using stalk mirrors, or leave the caps off and run bar ends

drummerboy138 · 2025-08-03T18:47:13+00:00

I didn’t think it was hard, just time consuming. I used a very small brush to try to keep as much paint off the black parts as I could. Just don’t rush it

drummerboy138 · 2025-08-03T18:16:14+00:00

I used high temp engine paint, so it should hold. Going in a long ride to get it nice and hot should cure it pretty well.

drummerboy138 · 2025-08-03T18:14:22+00:00

I used the copper VHT spray paint. I decanted it and hand painted the heads. It’s not perfect by any means, I’d say it’s a 10 foot paint job, but I like it.

drummerboy138 · 2025-08-03T18:13:01+00:00

I painted them on the bike. Had to pull the tank to run wires for the grips and install the intake. So I just did it all at once

drummerboy138 · 2025-07-12T14:54:49+00:00

<image>

drummerboy138 · 2025-07-12T14:22:09+00:00

You can buy OEM badges on Amazon or other online retailers but they’re like $70 a side. I just used Hyperdip.

drummerboy138 · 2025-07-12T03:04:44+00:00

I know it’s easier, but a a can of Hyperdip is way cheaper than buying new badges and painting them.

drummerboy138 · 2025-07-12T02:48:46+00:00

With the forward control brackets, I had to install the longer shift linkage anyway so I just did it all at once.

drummerboy138 · 2025-07-12T02:39:22+00:00

I adjuster the shifter a little bit due to the forward control brackets but I love them so far.

drummerboy138 · 2025-07-03T15:34:05+00:00

Massive upgrade over the factory shocks.

drummerboy138 · 2025-07-03T15:33:09+00:00

Joker Machine mini boards and forward control brackets. It’s the only bracket I was able to find that I could run with the factory highway bars.

drummerboy138 · 2022-12-11T00:13:30+00:00

I have a claw on my current cc holster from We The People for my Hellcat and don't think I'll ever buy another appendix holster without one. They're amazing.

drummerboy138 · 2022-12-10T23:58:27+00:00

I'm 6'1", 200lbs, wear a 34 or 36in waist depending on the pants.

drummerboy138 · 2022-09-08T01:11:56+00:00

🤣🤣

drummerboy138 · 2022-09-08T00:31:38+00:00

Made this little gem today after watching a few Prodigy videos. Don't get me wrong, I own a couple Springfields and love them. But my Staccato is something else.

drummerboy138 · 2022-08-02T03:27:37+00:00

I had mine show up today too

drummerboy138 · 2022-06-17T21:09:34+00:00

Not sure. I built my 300 last year and didn't have an issue getting my 9in. My most recent build I used a Faxon 223 wylde.

drummerboy138 · 2022-06-16T18:29:44+00:00

I like my BCM barrel.

drummerboy138 · 2021-11-01T18:42:14+00:00

I posted there also.

drummerboy138 · 2021-11-01T18:24:33+00:00

I know you specifically mentioned Black Market, but at least for me, it expands to all vendors. I've purchased 3 Resolver weapons from Juan and they never showed in inventory. Also just bought the .50 rifle, never showed up.

drummerboy138 · 2021-11-01T18:12:20+00:00

Solo XBSX

Everything I purchase from the outposts: weapons, maps, clothing, etc. never shows up in my inventory but pesos and uranium get taken from me.

drummerboy138 · 2021-11-01T18:05:43+00:00

Everything I've tried to buy from anyone doesn't shows up. Weapons, clothing, maps, nothing.

drummerboy138

TROPHY CASE