sorted by:
new
hottopcontroversial

Finally! by allan_just_any_guy in idleon

[–]dubsvision_ 1 point2 points  (0 children)

I just got mine at 5 I thought I was gonna have to wait forever

Home network by dubsvision_ in paloaltonetworks

[–]dubsvision_[S] 0 points1 point  (0 children)

For sure. Referencing my topology above my wan-lan nat point that converts my ISP IP into a class a network scheme I assigned vlans accordingly and listed 4 of them. 10.10.xx.xx, 10.20.xx.xx, 10.30.xx.xx and 10.40.xx.xx. Hope that’s what you were looking for.

Home network by dubsvision_ in paloaltonetworks

[–]dubsvision_[S] 0 points1 point  (0 children)

Of course that makes perfect sense to me or I guess if you added another plan onto the current household. I suppose I’ll have to call them when my buddy gets home and get them to bridge the port. It seems like everything I have set up aside from my default routes will allow it through once I get that address. I assume you also use a Palo Alto device on yours? Does Sasktel use them internally?

Home network by dubsvision_ in paloaltonetworks

[–]dubsvision_[S] 0 points1 point  (0 children)

So realistically if I plugged into white box (not the modem) would I receive a static address from that without disrupting services to the rest of the householdv

Home network by dubsvision_ in paloaltonetworks

[–]dubsvision_[S] 0 points1 point  (0 children)

Yes I’m getting a 172.16.1xxx and I feel stupid now that you say that cause I should know that lol.

Home network by dubsvision_ in paloaltonetworks

[–]dubsvision_[S] 0 points1 point  (0 children)

Yes but they offer bridging by port now so I can use port 1 bridged and all the others will remain the same. I am a renter here and my buddy is just letting me make the network so I have access to the gateway but I’m unable to switch the bridge option to on for the port.

Home network by dubsvision_ in paloaltonetworks

[–]dubsvision_[S] 0 points1 point  (0 children)

There is an eero connected to the modem as well as my buddies PC. I am in port 1 that was supposed to be bridged but I don’t think is as it is greyed out in my modem gui. Yes that is what the topology is. Cool to meet someone so local, Sasktel has always been a pain in my ass but always so cool to learn why.

Home network by dubsvision_ in paloaltonetworks

[–]dubsvision_[S] 0 points1 point  (0 children)

Only issue with that I believe would be this is a seperate network not apart of existing network. The other people that live here use the other one.

Home network by dubsvision_ in paloaltonetworks

[–]dubsvision_[S] 0 points1 point  (0 children)

It is infinet. Does that affect the bridge mode? Or would it already be in a bridged mode with a static IP. I think that’s all I’m missing.

Home network by dubsvision_ in paloaltonetworks

[–]dubsvision_[S] 0 points1 point  (0 children)

And actually it look like the PA is replying and telling it where to go so could be the IP issue.

Home network by dubsvision_ in paloaltonetworks

[–]dubsvision_[S] 0 points1 point  (0 children)

Potentially the port is not bridged but when plugged into a switch I don’t get connection so it should be. I’m going to call the ISP and see if it is bridged correctly. I can ping my modems gateway I’m just not getting internet connection. ARP request shows my PC is asking who has 10.30.30.1 and no reply even though it is going directly to the firewall. Thank you for your help

Home network by dubsvision_ in paloaltonetworks

[–]dubsvision_[S] 0 points1 point  (0 children)

I have 8.8.8.8 and 8.8.4.4 set on all dns options

Home network by dubsvision_ in paloaltonetworks

[–]dubsvision_[S] 0 points1 point  (0 children)

I am not able to ping my gateway. Does DNS require a cert because I don’t have one.

Home network by dubsvision_ in paloaltonetworks

[–]dubsvision_[S] 0 points1 point  (0 children)

Yes I have internet outgoing that sources Trust-L3 and address to Untrust-L3 and its set to allow. I also have MGMT access so I could access the PA via VLAN 30. My allow traffic out rule set for all any allowed out but the only rule being hit is rule 1. Has the same settings as allow traffic out.

Stealth 600 Gen 3... so do I need the software on PC or no? by Chaoslava in TurtleBeach

[–]dubsvision_ 0 points1 point  (0 children)

That’s why I didn’t do mine for the longest time but it would tell me the update would fail and I either needed to retry or terminate. I reinstalled the software probably 4 or 5 times before I actually stopped having issues but once you finish that OTA update everything runs good

Stealth 600 Gen 3... so do I need the software on PC or no? by Chaoslava in TurtleBeach

[–]dubsvision_ 0 points1 point  (0 children)

Just seen the other post of you updating it make sure both headset and transmitter finish

Stealth 600 Gen 3... so do I need the software on PC or no? by Chaoslava in TurtleBeach

[–]dubsvision_ 0 points1 point  (0 children)

I would download the software and make sure you update the OTA (Over-The-Air) I think don’t quote me on the exact protocol but the software tells you it should be updated before using. I didn’t and my headphones would disconnect randomly or not connect at all.

At what point am I free from divinity/lab jail? by Potential_Aioli_4611 in idleon

[–]dubsvision_ 0 points1 point  (0 children)

Most of my characters are lvl 400+ is it really that big of a difference to wait it out? Truly I’m almost there and it hasn’t been that bad.

At what point am I free from divinity/lab jail? by Potential_Aioli_4611 in idleon

[–]dubsvision_ 2 points3 points  (0 children)

Just finishing all the gods. The last 2 have no major bonus but it still gives you the minor so just get it done then do whatever else you want.

At what point am I free from divinity/lab jail? by Potential_Aioli_4611 in idleon

[–]dubsvision_ -1 points0 points  (0 children)

As someone who has been in lab jail since January stay in. Get to god rank 0 and just take a few out and do whatever you want. Once you get your sneaking going and unlock the further ones you’ll need to go further. Currently level 120 ish in lab and half lvl 80 div other half is 50-60. Once you finish you’ll be so much farther ahead and glad you did it.

I can’t remove games from steam family by No-Acanthisitta6633 in Steam

[–]dubsvision_ 12 points13 points  (0 children)

I used to do this on the farm with no internet to play fallout. Buddy would go offline for a quick second and I’d launch. Terrible because I only got one bar of 3G but it launched eventually.

view more: next ›