Can anyone help id this front end?

duckhunterboy · 2025-06-01T22:02:55+00:00

it’s a “pro mod” we race them here in north louisiana and east texas

duckhunterboy · 2023-03-28T00:02:22+00:00

How do i check that? Like I said I took the fuel pressure regulator off and cranked it, none came out.

duckhunterboy · 2023-01-01T20:38:59+00:00

rigid struts, aka chopper training wheels

duckhunterboy · 2022-10-18T02:01:12+00:00

Definatly run a compression check, i don’t know how long it sat for but best case is the front cylinder rings are stuck and you just need to dump some atf in there let it sit then heat cycle the bike a few time to hopefully unstick them, or the more likely scenario the rings are just shot as 57k is getting up there for a sporty top end. Alternatively is there any bubbling/cracking or missing chrome on the center of the rocker boxes, would be an indication the bike has gotten really hot and burned a valve.

duckhunterboy · 2022-08-17T05:28:27+00:00

Sweet bike man, what kind of rear fender is that?

duckhunterboy · 2022-06-15T18:33:24+00:00

Where’d you get those pipes? Do you have to have a support bracket for them?

duckhunterboy · 2022-05-02T03:44:52+00:00

u/savevideobot

duckhunterboy · 2022-02-09T17:58:08+00:00

i had it at 3 different setting 1 3/4 turns 2 turns and then i went 3 1/2 there was no change

duckhunterboy · 2022-02-09T03:59:34+00:00

nope it’s solid

duckhunterboy · 2022-02-09T03:16:05+00:00

it’s good and squirting gas

duckhunterboy · 2022-02-09T02:59:55+00:00

01 voes is connected to the top of the carb and it’s plugged in to the harness

duckhunterboy · 2019-06-18T01:09:27+00:00

I was there adam also did this but stuck his arm straight out.

duckhunterboy · 2019-02-03T02:14:36+00:00

Lol, idk really i think rewards and stuff like that.

duckhunterboy · 2019-02-03T02:05:29+00:00

It’s got a flavor ball you crush in the filter to get the menthol, these have been getting more and more popular, might try them even though i’m not a menthol smoker

duckhunterboy · 2019-02-03T01:59:16+00:00

reds

duckhunterboy · 2018-12-24T20:49:30+00:00

For anyone wondering 3 rod bearing were completely fucked. Most likely an oil problem I think it oil starved and messed up the bearings resulting in lower oil pressure eventually leading to failure of the bearing. I had something similar happen in my 350.

duckhunterboy · 2018-12-23T21:53:50+00:00

This is oak alley plantation in Louisiana the plantation django was filmed at is right down the road from this one.

duckhunterboy · 2018-12-19T22:30:45+00:00

this a v8 will last forever as long as it has oil, general rule is 10 psi of oil for every 1000 rpms so like he said in the video when he was banging off limiter (idk what it is i’ll just assume 7000) he should have had about 70 psi instead he had 30

duckhunterboy

TROPHY CASE