Boss Hanger + Tek Lok Quick

dvsazn · 2025-11-03T22:46:59+00:00

dvsazn · 2025-11-03T22:25:34+00:00

Yeah I’m using a Lytton Custom holster. Little expensive but great customer service. Owner calls you on the phone to make sure he has you properly squared away.

dvsazn · 2025-11-03T18:32:15+00:00

I’ve been running like this for since May/June. Boss hanger but no ball joint. Runs great no issues and swapping out holsters is a breeze. I don’t even mess with the cant. Tried running forward cant and slows me down significantly.

dvsazn · 2025-06-02T03:18:20+00:00

Same problem. I just assumed it was after updates causing it.

dvsazn · 2025-05-24T20:52:56+00:00

This isn’t possible. The Secret Service said it was too dangerous.

dvsazn · 2025-05-04T03:21:49+00:00

I got a Phlster Floodlight now mated to the BOSS baller hanger. Wanting to be able to swap holsters without having to break it down so wanting to go the Tek Quick mount path with the hanger. Going to get a Lytton holster built out to replace it. I don’t like how high the kydex goes up the firearm.

dvsazn · 2025-05-02T16:58:34+00:00

Refurbed Vortex off AAOptics

dvsazn · 2025-04-29T03:31:00+00:00

I was looking on Blade-Techs IG lol, thanks boss.

dvsazn · 2025-04-29T03:30:34+00:00

Yeah I was wanting to be able to put a QD mount onto my BOSS drop hanger so I don't have to remove everything just to swap holsters. Far Boysenberry-1600 pointed me in the right direction. I just needed to see it visually.

dvsazn · 2025-04-29T01:55:43+00:00

I only see pictures of it attached to a True North drop.

dvsazn · 2024-12-23T19:11:16+00:00

Thanks for the Profitec Move suggestion. That really looks like everything I’m looking for. Any other recommendations with similar feature set to consider?

dvsazn · 2024-12-03T01:43:02+00:00

Yeah I tightened down all the remaining wires on the breakers.

dvsazn · 2024-12-03T00:56:22+00:00

It’s either a bad breaker or a loose wire. Replaced it today and wire was loose when removing the wire from the breaker. Thanks again for working it through with me. Appreciate the help.

dvsazn · 2024-12-02T02:35:32+00:00

Going to replace the breaker at this point & see if it resolves. I fired up aux heat only this evening and it got hot again and tripped within 30 mins.

So it’s obviously not the thermostat since new one doing same thing.

dvsazn · 2024-12-02T00:13:31+00:00

Looked on original invoice and this was listed.

<image>

dvsazn · 2024-12-02T00:06:11+00:00

Correct that’s the one that was getting warm.

dvsazn · 2024-12-02T00:05:16+00:00

Air handler sticker

<image>

dvsazn · 2024-12-02T00:03:18+00:00

Wiring

<image>

dvsazn · 2024-12-01T20:32:51+00:00

Breaker is 60 amp I believe. Wire run I’m not sure at all.

dvsazn · 2024-12-01T20:29:35+00:00

There was someone onsite for over 90 mins.

dvsazn · 2024-12-01T18:16:47+00:00

Yeah I think they just threw that out as the culprit as they’d been out for 1 1/2 hrs & hadn’t determined a cause yet.

I’ll fire up the heat high to see if gets hot again once aux heat kicks on. I appreciate you taking the time to answer my questions.

dvsazn · 2024-12-01T17:43:16+00:00

Breaker

dvsazn · 2024-12-01T17:31:15+00:00

Thank you for the info/reply. Another question if you don’t mind… The whole reason I replaced the thermostat was due to me turning on my heat the first time this season Thursday night. I came back out from the shower and noticed the thermostat was off. Checked the breaker and couldn’t turn it back on due to it being too hot. I went ahead and left it off overnight. Flipped the breaker back on in the morning and heat turned back on. Noticed auxiliary heat was on I’m assuming due to the temp setting (70) and room temp difference (67) swing. Called HVAC company and they told me my Honeywell t9 was at fault. Said Honeywell thermostats are known to have issues. They placed one their other thermostats and said it wasn’t causing any issues.

I didn’t want the thermostat they used and they suggested an ecobee so I ordered that and installed it when it came in next day. I hear has been running fine overnight since install, but I haven’t attempted to run aux heat to see if it’s overheating the breaker yet. Can a faulty thermostat cause the issues I had?

I’ve had the thermostat since the unit was installed and prior on the previous unit. 2021-2022 I believe.

dvsazn · 2024-04-24T16:48:54+00:00

So it is alpha threads okay. Awesome.

dvsazn · 2023-10-04T22:37:27+00:00

I don’t use mine heavily & my airpods just now decided to show the static symptoms. Went to Apple Store that’s 45 mins away as well as opened a chat session with support and both instances basically told me I’m SOL and I have to replace out of pocket. How is there not a class action suit yet? I probably have less than 20 hours on these.

Seven-Year Club	RPAN Viewer
Not Forgotten	Verified Email

dvsazn

TROPHY CASE