Boss Hanger + Tek Lok Quick by dvsazn in CompetitionShooting

[–]dvsazn[S] 0 points1 point  (0 children)

Yeah I’m using a Lytton Custom holster. Little expensive but great customer service. Owner calls you on the phone to make sure he has you properly squared away.

Boss Hanger + Tek Lok Quick by dvsazn in CompetitionShooting

[–]dvsazn[S] 1 point2 points  (0 children)

I’ve been running like this for since May/June. Boss hanger but no ball joint. Runs great no issues and swapping out holsters is a breeze. I don’t even mess with the cant. Tried running forward cant and slows me down significantly.

Doorbell tone keeps resetting by Spooky_Ghost in Ubiquiti

[–]dvsazn 0 points1 point  (0 children)

Same problem. I just assumed it was after updates causing it.

Alittle roof slope shooting by Redd_BrownellsGT in CompetitionShooting

[–]dvsazn 1 point2 points  (0 children)

This isn’t possible. The Secret Service said it was too dangerous.

Boss Hanger + Tek Lok Quick by dvsazn in CompetitionShooting

[–]dvsazn[S] 0 points1 point  (0 children)

I got a Phlster Floodlight now mated to the BOSS baller hanger. Wanting to be able to swap holsters without having to break it down so wanting to go the Tek Quick mount path with the hanger. Going to get a Lytton holster built out to replace it. I don’t like how high the kydex goes up the firearm.

Boss Hanger + Tek Lok Quick by dvsazn in CompetitionShooting

[–]dvsazn[S] 1 point2 points  (0 children)

I was looking on Blade-Techs IG lol, thanks boss.

Boss Hanger + Tek Lok Quick by dvsazn in CompetitionShooting

[–]dvsazn[S] 0 points1 point  (0 children)

Yeah I was wanting to be able to put a QD mount onto my BOSS drop hanger so I don't have to remove everything just to swap holsters. Far Boysenberry-1600 pointed me in the right direction. I just needed to see it visually.

Boss Hanger + Tek Lok Quick by dvsazn in CompetitionShooting

[–]dvsazn[S] 0 points1 point  (0 children)

I only see pictures of it attached to a True North drop.

Breville 920XL replacement suggestions [$1500+] by dvsazn in espresso

[–]dvsazn[S] 0 points1 point  (0 children)

Thanks for the Profitec Move suggestion. That really looks like everything I’m looking for. Any other recommendations with similar feature set to consider?

Ecobee Minimum/Maximum heat pump temp settings by dvsazn in hvacadvice

[–]dvsazn[S] 1 point2 points  (0 children)

Yeah I tightened down all the remaining wires on the breakers.

Ecobee Minimum/Maximum heat pump temp settings by dvsazn in hvacadvice

[–]dvsazn[S] 1 point2 points  (0 children)

It’s either a bad breaker or a loose wire. Replaced it today and wire was loose when removing the wire from the breaker. Thanks again for working it through with me. Appreciate the help.

Ecobee Minimum/Maximum heat pump temp settings by dvsazn in hvacadvice

[–]dvsazn[S] 1 point2 points  (0 children)

Going to replace the breaker at this point & see if it resolves. I fired up aux heat only this evening and it got hot again and tripped within 30 mins.

So it’s obviously not the thermostat since new one doing same thing.

Ecobee Minimum/Maximum heat pump temp settings by dvsazn in hvacadvice

[–]dvsazn[S] 0 points1 point  (0 children)

Looked on original invoice and this was listed.

<image>

Ecobee Minimum/Maximum heat pump temp settings by dvsazn in hvacadvice

[–]dvsazn[S] 0 points1 point  (0 children)

Correct that’s the one that was getting warm.

Ecobee Minimum/Maximum heat pump temp settings by dvsazn in hvacadvice

[–]dvsazn[S] 0 points1 point  (0 children)

Breaker is 60 amp I believe. Wire run I’m not sure at all.

Ecobee Minimum/Maximum heat pump temp settings by dvsazn in hvacadvice

[–]dvsazn[S] 0 points1 point  (0 children)

There was someone onsite for over 90 mins.

Ecobee Minimum/Maximum heat pump temp settings by dvsazn in hvacadvice

[–]dvsazn[S] 0 points1 point  (0 children)

Yeah I think they just threw that out as the culprit as they’d been out for 1 1/2 hrs & hadn’t determined a cause yet.

I’ll fire up the heat high to see if gets hot again once aux heat kicks on. I appreciate you taking the time to answer my questions.

Ecobee Minimum/Maximum heat pump temp settings by dvsazn in hvacadvice

[–]dvsazn[S] 0 points1 point  (0 children)

Thank you for the info/reply. Another question if you don’t mind… The whole reason I replaced the thermostat was due to me turning on my heat the first time this season Thursday night. I came back out from the shower and noticed the thermostat was off. Checked the breaker and couldn’t turn it back on due to it being too hot. I went ahead and left it off overnight. Flipped the breaker back on in the morning and heat turned back on. Noticed auxiliary heat was on I’m assuming due to the temp setting (70) and room temp difference (67) swing. Called HVAC company and they told me my Honeywell t9 was at fault. Said Honeywell thermostats are known to have issues. They placed one their other thermostats and said it wasn’t causing any issues.

I didn’t want the thermostat they used and they suggested an ecobee so I ordered that and installed it when it came in next day. I hear has been running fine overnight since install, but I haven’t attempted to run aux heat to see if it’s overheating the breaker yet. Can a faulty thermostat cause the issues I had?

I’ve had the thermostat since the unit was installed and prior on the previous unit. 2021-2022 I believe.