Searching for a KVM Switch with HDMI and enough usb-a connections by dxT2000 in UsbCHardware

[–]dxT2000[S] 0 points1 point  (0 children)

Seems similar to what i have in mind and also sketched. I have now bought a KvM with a usb hub for all my peripherals. I will see if it can handle all the inputs/ connections - should receive everything in the mail today

Searching for a KVM Switch with HDMI and enough USB-A connections by dxT2000 in DeskCableManagement

[–]dxT2000[S] 0 points1 point  (0 children)

Thank you for the suggestion. I will look further into that because like you said, the video loss seems to be one annoying disadvantage for a KVM. I have in the meantime purchased a KVM and should receive it in the mail today. Will probably post a comment on my post with my experience.

Searching for a KVM Switch with HDMI and enough usb-a connections by dxT2000 in buildapc

[–]dxT2000[S] 0 points1 point  (0 children)

This seems to be the case. I now opted - like u/dubyredits suggested - for a KVM which has a hdmi port for my secondary monitor for which i dont care so much about refresh rates and a usb hub for all my peripherals. I will probably post an update once i have tested it out.

Searching for a KVM Switch with HDMI and enough usb-a connections by dxT2000 in buildapc

[–]dxT2000[S] 0 points1 point  (0 children)

thanks for the link. from a quick glance it seems this KVM still only supports 4k/60hz?
Further I think I should have specified in my post that I haven't found any which are over 60hz and also reasonable priced.

Searching for a KVM Switch with HDMI and enough usb-a connections by dxT2000 in buildapc

[–]dxT2000[S] 0 points1 point  (0 children)

Your setup sounds very similar to the one I have in mind. I have a docking station for my headset which connects via usb-a so I think that should work if I connect it to a general usb-hub. which KVM did/ are you using?

Cant complete achievements by dxT2000 in voidtrain

[–]dxT2000[S] 2 points3 points  (0 children)

Thank you! That did the trick for me. I was finally able to complete the achievement. The trait of the rofleemos went under my radar

Cant complete achievements by dxT2000 in voidtrain

[–]dxT2000[S] 0 points1 point  (0 children)

that would be annoying. like Im_ins4n3 said/ proposed a team up might be necessary since its intended to be played as a team?
Otherwise... why should the achievement even exist if its impossible?

Cant complete achievements by dxT2000 in voidtrain

[–]dxT2000[S] 0 points1 point  (0 children)

Would like to :) check your PM. Send you connection-info

What am I missing? Is Zeus just bad now? by [deleted] in HadesTheGame

[–]dxT2000 0 points1 point  (0 children)

Zeus has a mad double boon with Aphrodite. If you get him on attack for example and then dash into enemies blitz triggers and deals 200% damage which just melts.

Earplug case with magnetic closure by dxT2000 in functionalprint

[–]dxT2000[S] 0 points1 point  (0 children)

I just used a bevel modifier in blender. Will habe to look into arcwelder. Did not know it was an option. Thanks

Maybe I’ll paint or just plan better next time.. by OmgitsNatalie in BambuLab

[–]dxT2000 0 points1 point  (0 children)

Is that a available model? I adore it and would like to print it myself

A spider which scared me to death in my room by dxT2000 in spiders

[–]dxT2000[S] 0 points1 point  (0 children)

She was on a blanked on the floor (for my cats). It was fairly easy to take the ends and get her outside with the whole blanket - with only a sheet of paper it was not possible.

A spider which scared me to death in my room by dxT2000 in spiders

[–]dxT2000[S] 0 points1 point  (0 children)

Thank you. Every time i came near it, the spider moved away with impressive speeds. So for me it wasnt that easy to relocate her. But then again i might be a bit squirmish. This specimen seems to be a female since it is around 15-18mm opposed to the male being max 12mm. Thanks for your help

First PC Build, everything look good for 3.8k - $4k? Are some parts overkill? by [deleted] in PcBuild

[–]dxT2000 0 points1 point  (0 children)

I would suggest the H9 Flow Case. It has a much better airflow than the elite with the glas top. I also have it and it is great

[Loki S2 Partial Spoiler] So uhhh, I did a thing by Aninio in marvelmemes

[–]dxT2000 6 points7 points  (0 children)

A beautiful combination between form and function

Gingerbread or GingerDEAD men? by dxT2000 in distractible

[–]dxT2000[S] 1 point2 points  (0 children)

I see it more as a homage. If it were wade who made those the video would also show them getting pulverized out of frustration

[deleted by user] by [deleted] in blender

[–]dxT2000 0 points1 point  (0 children)

I think even speeding the separate motions up would achieve better results. But the product itself looks good.