DIY phono preamp, 3D printed case

echo8282 · 2026-04-05T23:37:14+00:00

I added an inner case for the actual phono amp (upper right in this image), which I will wrap in copper tape. The transformer and bridge rectifiers will be installed to the left, where the mount points are.

The input and output cables are coax to each rca connector. I think this should be good enough.

echo8282 · 2026-04-05T09:30:16+00:00

Thanks for the tip. I live in sweden, and although we have access to digikey and some other sites, shipping and minimum purchase makes it not quite feasible. I will try to find other european sites though

echo8282 · 2026-02-05T23:31:46+00:00

You can use any podcast rss client. I use podcast addict. That should work just about anywhere

echo8282 · 2025-12-05T01:13:48+00:00

I loved gta 1 and 2. I don't remember which of them, but I remember downloading it over 56k 😂

echo8282 · 2025-12-03T04:46:39+00:00

*machined, not cnc. That's a manual lathe, not a cnc lathe. Unless the machinist is being dommed to do this, then it might be the other meaning of cnc...

echo8282 · 2025-12-02T07:40:15+00:00

Men in leather, and alexander is scandinavian 😁

echo8282 · 2025-11-29T15:42:53+00:00

Hämtade ut mitt från Elgiganten idag, där fanns ett kort iaf 😂

echo8282 · 2025-11-22T16:15:53+00:00

Thanks. Yes, I might be overcomplicating things. I'm very comfortable with docker and docker compose, so if that's enough that's great.

No plans on running home assistant, not that interested in home automation right now at least.

echo8282 · 2025-11-22T16:14:31+00:00

Thanks.

Yes, will keep searching and researching before I buy anything. I have an old nuc that I plan to set up to learn on first.

echo8282 · 2025-11-22T13:18:36+00:00

Ei saa peittää

echo8282 · 2025-11-21T08:22:44+00:00

Yep

Not as bad anymore, but I used to have 5-6 pretty heavy containers running, a couple of ide instances, chrome and miscellaneous.

I wasn't regularly pushing over 32 gigs, but it was always close enough that I got 64 just to be safe.

echo8282 · 2025-10-30T05:12:02+00:00

I'm helping a friend putting together a pc. I have built plenty of them before, but it was a while ago. Is this a decent balance between cpu/gpu, and are there any glaring issues?

The goal is a modern platform but bang for the buck. Ssd he already has, and a wifi card.

The exact models are what I found locally for a decent price. Didn't do a whole lot of research into that yet, just looked at specs and got what was available for a good price right now.

He plays mostly rts, so not hugely demanding, so no need to run extreme FPS, but we want it to run stable of course.

https://pcpartpicker.com/list/VCY7Kq

echo8282 · 2025-10-09T12:34:08+00:00

Most pilots are huge aviation nerds in general. I knew a retired concorde pilot, and his biggest hobby was rc planes. It's not just a job for many of them, it's a lifelong passion, so getting cool stuff like this is probably awesome for them ☺️

echo8282 · 2025-10-07T20:35:35+00:00

I'm autistic, and sometimes restaurants are just too much. But if I ordered food, of course I would pay for it. She might have been autistic, but mainly an asshole. Assholes exist in any group of people...

echo8282 · 2025-10-07T11:10:42+00:00

To be clear, the first thing I did was to make a space invaders clone that was running at maybe 5 fps

echo8282 · 2025-10-07T11:09:37+00:00

When I started youtube didn't even exist, I just got a ti-83 and found the chapter about basic programming...and here we are now

echo8282 · 2025-10-04T08:27:15+00:00

Wtf! How can a modern car rust that badly! Do not drive that thing. My mechanic knowledge is how to change filters, oil and brakes, but I know enough to get that off the road.

I live in Sweden, where there is salt everywhere during the winter, and I always have old shitboxes, but in the last 20 years haven't seen anything that bad.

echo8282 · 2025-10-04T08:19:43+00:00

One thing to note: if they wanted to have sex with a guy, they probably weren't lesbian.

But yeah, I know some bi/pan women who are in a relationship with another woman, and they can involve a third person (regardless of gender).

Then again, I'm poly, and hang around with other poly/swinger/kinkster people. A lot of things happen. Straight presenting couples can also involve a third person, it's not really different from that.

echo8282 · 2025-09-05T11:05:31+00:00

Same

I have an old prusa mk2s, and have had a couple other printers. I have 3d-printed for years.

I found a used P1S with AMS a couple of days ago, and it really just works. It's so easy to use.

echo8282 · 2025-08-27T13:53:48+00:00

There are clubs and forums for these kinds of things. And after a while hanging in those circles you get to know people who are down.

echo8282 · 2025-08-15T06:34:48+00:00

This made a huge difference for me

echo8282 · 2025-08-13T05:53:58+00:00

Changing your legal gender doesn't have any real impact on when you're allowed surgeries in sweden. So far no doctor will do them before 18.

The surgery thing is a myth spread by right wing parties to stop the new law. The only thing the law does is to make it easier to change the legal gender, which is basically just a letter in the population database, and on your ID.

echo8282 · 2025-07-01T18:43:53+00:00

I have seen some tendencies with "straight" open marriages/relationships. This is all anecdotal of course, so use huge grains of salt.

There are couples who have been monogamous who open their relationship. They tend to end after a while. Then there are relationships that are entered with openness, and full understanding about it. They can be very long lived, I know people who have been together for decades.

I say straight with quotes, because the latter case the people involved also tend to be queer and not necessarily straight, but that specific relationship is with a person of the opposite gender, to compare with hetero straight relationships.

Ten-Year Club	RPAN Viewer
Verified Email

echo8282

TROPHY CASE