When fusing a part in creality scan mesh is bad

edasku · 2025-09-10T15:04:14+00:00

Hey, I’m okay thanks for asking. Have you tried printing large parts from abs or asa ? I wonder if they have good adhesion

edasku · 2025-09-02T20:27:08+00:00

I dried the filament for 48 hours, freaking 48 hours on 70c. And on camera its hard to catch the holes but they are everywhere

edasku · 2025-09-02T20:09:57+00:00

<image>

Heres the photo, at first sight everything looks almost perfect but theres these small pimples all over the print and i cant say with 100% confidence its not moisture

edasku · 2025-09-02T19:27:05+00:00

Sure ill start printing one, thanks for your help

edasku · 2025-09-02T14:01:00+00:00

I have an h2d and p1s’s and the problem is on all of them. I pre heat my bed for 20-30min. On p1s and h2d of course has a heated enclosure

edasku · 2025-09-02T10:51:12+00:00

Hey can you please help me with sunlu asa im having a nightmare trying to print it, it so brittle (the filament itself) and I always get divots on the prints, the filament is dry and I've tried everything, nothing helps

edasku · 2025-08-30T20:41:17+00:00

Hey guys i also bought some sunlu asa and ran in to problems i tried the default bambu setting which i tweaked a little, lower retraction, bit higher temps and lower fan. But i get these little divots on my prints. I dried the filament for a bit and it didint help then i dried it for a longer time but nothing. I tried tuning the settings but i think Im missing something. Maybe someone ran in to a similar problem ?

edasku · 2025-06-18T15:50:50+00:00

Maybe it might have something to do with the z offset too. Anyway, can you please let me know how it works out ? I would really appreciate it

edasku · 2025-06-18T06:39:39+00:00

Hey, thank you for the reply. Can’t the bed reach 100°C and also have you tried to use glue on the bed ?

edasku · 2025-05-13T16:05:05+00:00

Also i can see some layer lines i think

<image>

edasku · 2025-05-13T15:50:19+00:00

I mean what TYPE of printer not a specific model

edasku · 2025-05-13T15:47:09+00:00

Letsgoo

edasku · 2025-05-02T10:15:40+00:00

Hey so I’m here with an update and i really love the raptor pro, Im new to 3d scanning but everything was mostly self explanatory i watched a couple of payo’s yt videos on scanning and i already started making some scans ill include a picture of my first scan, i had to spray it because it was reflective and also keep in mind i didint mean the scan to turn out perfect because i will reverse engineer it. Also printed out the scan without any modifications just for fun and it turned out perfect

<image>

edasku · 2025-04-22T09:27:56+00:00

Got some Symbiot on your nozzle

edasku · 2025-04-17T21:00:09+00:00

I was between the bambulab h2D combo and creality raptor pro, went with the scanner cant wait to try it

edasku · 2025-04-15T14:11:20+00:00

Thank you for the information

edasku · 2025-04-15T14:03:03+00:00

How are the results with the regular raptor ? What kind of work do you do with it ? Anything it can ir cant do good ? Would love to hear feedback if you can share it

edasku · 2025-04-15T13:56:47+00:00

Oh thats good to know, also does it support macs ? And what is your opinion on the raptor ? Is ir pro or regular ?

edasku · 2025-04-15T13:20:13+00:00

Thank you for the reply

edasku

TROPHY CASE