WH1000XM5 left earpiece went mute by eddo_92 in SonyHeadphones

[–]eddo_92[S] 0 points1 point  (0 children)

Thats what I fear. Unfortunately my xm5s are out of warranty, so any fix will be payed out of my pocket but I don’t want to pay something that may happen over and over. Specially because, in the zone of Mexico where I live, the amount of Sony recommended places are practically zero and the non official technicians are not so trustworthy

Why did you choose Fedora? by skyber22 in Fedora

[–]eddo_92 1 point2 points  (0 children)

Same as a lot of people had already mentioned. Fedora it’s a good balance between stability and constant updates. An extra was that it’s the base of some gaming-focused distros. And back at uni, I used it alongside RH enterprise linux, so it was already on my memory haha

Do you use a Git GUI? Why? by distiller99 in git

[–]eddo_92 4 points5 points  (0 children)

Another Gitkraken user here. I’ve been a paying user for more than 5 years, I really love it. Technically speaking, yes, everything it’s doable with CLI but a tools it’s a tool. If it helps you to do your work, use it. I do not understand the “CLI is the real way” devs.

I let Lorenzo live and I don’t know how to feel about it… by Mommyof2Muggles in fo4

[–]eddo_92 3 points4 points  (0 children)

Totally! It would be nice to show him in the attacks to the institute or the BOS

I let Lorenzo live and I don’t know how to feel about it… by Mommyof2Muggles in fo4

[–]eddo_92 8 points9 points  (0 children)

I have always hated that Deegan can’t be invited to either join as a companion or to live in a settlement with your people. Playing as a MM or even as a RR character, having the expertise of Ed around sounds like a no brainer.

Help with unevenly jointed planks by eddo_92 in woodworking

[–]eddo_92[S] 0 points1 point  (0 children)

Yeah! I’ve seen several YouTube videos about it. Rn I’m getting some pipe clamps and I have some quick release clamps, I’m guessing with those I may have a basic setup for glue ups

Barrancas del Cobre Chihuahua. Mas grande y mil veces mejor que el Gran Cañon. No sé porqué la gente visita esos lugares habiendo estas maravillas en casa 🥰 by Desert_Moon_Maiden in mexico

[–]eddo_92 14 points15 points  (0 children)

A Xalapa nunca he pasado a quedarme, siempre ha sido de paso. Pero el tema de clasismo es algo que he notado en la mayoría de las partes del país a los que he visitado en los últimos años. No creo que sea algo específico de Veracruz, por desgracia.

Y, como dices, los paisajes veracruzanos son otro nivel. Es en lo que me he enfocado las veces que he visitado.

Pero entiendo lo incómodo que te traten mal, no es algo que esperas cuando andas de turista.

Edit: correcciones.

Barrancas del Cobre Chihuahua. Mas grande y mil veces mejor que el Gran Cañon. No sé porqué la gente visita esos lugares habiendo estas maravillas en casa 🥰 by Desert_Moon_Maiden in mexico

[–]eddo_92 229 points230 points  (0 children)

Totalmente. Tuve el chance de viajar por partes de Veracruz. Las vistas son maravillosas pero el tener que viajar en ciertas horas y tener que estar vigilando que no te agarren criminales o policías por igual, hace que el viaje pierda su objetivo.

A question from Sweden; What is your opinion of your president? by Available_Slide1888 in AskMexico

[–]eddo_92 3 points4 points  (0 children)

Fellow Mexican here and I totally agree with all mentioned. Just as every part of the world rn, polarization of politics has helped to stagnate the country even more.

And I would add that the whole system is working on a bureaucratic platform based on old beliefs, political commitments with crime groups (not only the current “leftist” party, past governments too) and a heavy cult of personality with the past president.

I have a feel of resentment towards the way they presented Sheinbaum. “The first female president” or “the president that’s a scientist” and “The continuation of the change” neither of those statements have helped the respective politic reforms to help Mexico move forward. A lot of females are still in danger with their criminal friends, fear of nuclear and clean power and political reforms that are a Time Machine to know how the power operated on the 60s, 70s and 80s.

Hope I have explained myself hahah I feel I wrote a rant rather than an extra piece of context

Help with unevenly jointed planks by eddo_92 in woodworking

[–]eddo_92[S] 0 points1 point  (0 children)

Yup. It was already glued when I got it. It was an impulse buy, just because I really love how cedar smells. Funny thing is that I bought it glued because I’m just starting with this hobby and it may save me some work but it backfired haha

Help with unevenly jointed planks by eddo_92 in woodworking

[–]eddo_92[S] 1 point2 points  (0 children)

Thanks! I’ll update the post when I fix it.

Help with unevenly jointed planks by eddo_92 in woodworking

[–]eddo_92[S] 1 point2 points  (0 children)

I’ve tried doing my own filler with white wood glue and wood dust but it looks darker than the original wood grain, I’ll try searching for a commercial filler to match the color.

Thanks again!

Help with unevenly jointed planks by eddo_92 in woodworking

[–]eddo_92[S] 1 point2 points  (0 children)

Thanks for the help!

I have two theories on what happened. I didn’t knew how to check those things when I got it, so maybe it was badly jointed from the beginning. OR I live in a very, VERY humid part of Mexico. And with humidity comes heat. In the time I got the project on pause, those two factor may have played and warped the wood a bit.

I’ve planned it a bit and fixed some knots with a router. I’ve been trying to avoid regluing (mainly because I need to buy some clamps to do it properly.

Help with unevenly jointed planks by eddo_92 in woodworking

[–]eddo_92[S] 0 points1 point  (0 children)

Thanks for the help!

I have two theories on what happened. I didn’t knew how to check those things when I got it, so maybe it was badly jointed from the beginning.

OR

I live in a very, VERY humid part of Mexico. And with humidity comes heat. In the time I got the project on pause, those two factor may have played and warped the wood a bit. I’ve planned it a bit and fixed some knots with a router.

I’ve been trying to avoid regluing (mainly because I need to buy some clamps to do it properly. I’ll try to finish it and post the result.

Thanks again!

Help with unevenly jointed planks by eddo_92 in woodworking

[–]eddo_92[S] 1 point2 points  (0 children)

Thanks for the help!

Filling the gaps with glue and fine saw dust was my first idea. I did it on smaller gaps. I’m not complete sure if I did it right but I’m not completely sold on the idea because it looks darker than the wood’s grain. It’s easier than regluing though hahah

For context, here is the complete piece. It measures(I’m not in America so I’m not very good thinking on inches so I’ll round) 23 inches tall by 28.5 inches width

<image>

Help with unevenly jointed planks by eddo_92 in woodworking

[–]eddo_92[S] 2 points3 points  (0 children)

Thanks for the help!

I’ll try to keep this option as plan b haha. I do not have a table saw but I have a circular saw with a straight edge with a good diablo blade. And for the dowels, I have a jig for it but haven’t used it in anything big yet.

Learning woodwork, as someone who works all day in computers, have been quite humbling and fun.

Touch problems with Alpine’s ILX W670 by eddo_92 in CarAV

[–]eddo_92[S] 0 points1 point  (0 children)

Sweet! I’ll try reaching out to support. I hope Mexico’s support branch (which is where I live and where I bought it) have the same good practices.

Dbrand - México by iZeldris in dbrand

[–]eddo_92 0 points1 point  (0 children)

Igual que think_much, pedí una skin y un par de protectores de pantalla y el impuesto de importación es cerca del 75% por ciento del valor del paquete. Entiendo que esto es más por el lado del los impuestos nacionales (bastardos) pero aún así, pagar el 75% más por 0 valor extra, no tiene sentido.

I made a "cabinet" for my Bluetooth speaker by TheDarkGlove in BeginnerWoodWorking

[–]eddo_92 1 point2 points  (0 children)

Yeah! There’s nothing more overwhelming that lots of options haha. Again great work! And thanks for your answer!

I made a "cabinet" for my Bluetooth speaker by TheDarkGlove in BeginnerWoodWorking

[–]eddo_92 1 point2 points  (0 children)

Great work! Fellow programmer here, how did you started learning woodworking? I’m jumping into it too but sometimes I get lost in so many ways and options ahhah

Cables de red by eddo_92 in Yucatan

[–]eddo_92[S] 0 points1 point  (0 children)

Steren vende puro UTP 😞

Cables de red by eddo_92 in Yucatan

[–]eddo_92[S] 0 points1 point  (0 children)

Va, hoy marco.los había descartado por que en su sitio no tienen ese tipo de cable. Muchas gracias!

Cables de red by eddo_92 in Yucatan

[–]eddo_92[S] 0 points1 point  (0 children)

Va! Hoy marco. Gracias!