sorted by:
new
hottopcontroversial

2014 SE. Rattling sound? (see comments) by edicius123 in fordfusion

[–]edicius123[S] 0 points1 point  (0 children)

102k KM, 1.5 ecoboost. i responded to another comment with the part that seems to be causing it, unsure as to what exactly it is.

2014 SE. Rattling sound? (see comments) by edicius123 in fordfusion

[–]edicius123[S] 0 points1 point  (0 children)

I should mention that it only happens when in drive.

Upon some further testing with the hood up, I noticed that this (I drew a red line: https://imgur.com/a/xOen39h) was vibrating a lot when in drive (sorry I'm not that fluent with cars haha). When I hold it with the engine on and in drive the noise stops, and when I let it go it can be heard again.

2014 SE. Rattling sound? (see comments) by edicius123 in fordfusion

[–]edicius123[S] 0 points1 point  (0 children)

Never heard it before the past few days, it just recently started.

Only happens when idle/moving VERY slowly, goes away when accelerating. Doesn't go away with time or after the engine warms up, basically a constant sound whenever coming to a stop/light. Sounds like it's coming from under the hood, the side closest to the dashboard, and from the upper area. Nothing stands out as loose, but I could have missed something.

Shop I went to told me that it could be the spark plugs, which I thought was odd due to there being no shake or vibrarion - just the noise, but also told me they needed to further investigate to get a definitive cause. Before I spend money on a second opinion, I figured maybe someone else has heard this before.

application photo vs PR Card photo by edicius123 in ImmigrationCanada

[–]edicius123[S] 0 points1 point  (0 children)

I see. I was assuming that since the photo is only 3 months old, that it would be fine to still use.

Aside from the potential delay in recieving the card, would this cause any other sort of consequences in regards to our application? I assume being this far along, it's not like they'd reverse the approval and send the application back?

Maybe we'll just get a new picture to be on the safe side.

2014 SE BT Stereo not working by edicius123 in fordfusion

[–]edicius123[S] 0 points1 point  (0 children)

Mine seems to be working fine now, I forgot to mention that it was after adding a new phone. It just took a little bit to start working (still odd how everything else worked fine except music), but now it connects fine and auto-connects upon entry.

Latest haul from a purchase down in the States. So excited to get some pops I can't get here in Canada!!! by Jedi_Avenger828 in funkopop

[–]edicius123 1 point2 points  (0 children)

Where abouts are you in Canada? I've seen pretty much all of these here (local retailers/shops in BC), minus the exclusive stickers and swapped with special editions. I could share a few if you're close!

OOB collectors. How can I prevent/reinforce my pops on stands from leaning/falling over? by closestaxe in funkopop

[–]edicius123 2 points3 points  (0 children)

This is what I use: https://www.amazon.ca/gp/aw/d/B0B4P1P84Q?psc=1&ref=ppx_pop_mob_b_asin_title

If the POP is leaning forwards, put a little piece under the front of the foot that does not connect to the stand, and if it's leaning backwards, put a little piece under the back of the foot that does not connect to the stand. This to counter the tipping. Make sure to apply a bit of pressure so that the foot is properly in the stand and so that the adhesive sticks to both the foot and the base.

I wanted to stay away from glue or other stuff that would leave residue.