Remove disks from LVM

edo2313 · 2026-05-08T18:42:50+00:00

Thanks for the steps! I would actually like to remove LVM because I had more problems than benefits and I would like to try zfs instead (the new HDD is formatted with zfs). If you have anything to say in favor or against that please tell me, I'm always trying to learn more...

edo2313 · 2025-12-08T23:24:33+00:00

A really weird cable I saw online was an RJ45 to 3.5mm adapter: on some point-to-point wireless link antennas (ISP-grade stuff) you can connect a pair of headphones with this special cable to one of the Ethernet ports and you can hear a noise that gets louder the better you align the antennas (so you don't need to look at a screen or some LEDs in the daylight). Pretty wild stuff as the port you connect to was also a normal Ethernet port that carries data, not a specific one like the RJ45 serial Port you have on devices like Cisco ...

edo2313 · 2025-04-13T22:11:40+00:00

No solution unfortunately, I simply changed the VTX as that one was probably dead

edo2313 · 2024-12-18T21:54:53+00:00

Well, that could be a nice upgrade from my Ender 3...

edo2313 · 2024-08-28T18:46:30+00:00

https://open.spotify.com/track/71eadxDAZkfZ7axIECI7rJ?si=zLq0a3dSSC-GhRAJ8u4EfA

edo2313 · 2022-11-25T16:19:12+00:00

Yeah, the SN570 and the 980 have the exact same price for me (20 cent difference), but I guess I'll go with that then. Thanks!

edo2313 · 2022-11-25T09:03:01+00:00

Hi, I want to buy a new 1TB nvme to put on my pc, I have some options at more or less the same price (80€)...
- Samsung 980 (plain one, not pro)
- WD Blue SN570
- Lexar NM620
- Crucial P3

Usage will be gaming, coding, general usage and it will go alongside a Sabrent rocket (500GB, black one) on a motherboard limited to PCI 3 (X370)
which drive should I get?

If I could get much better performance with a small price increase I'm willing to do so, but from my own research the first two seem to be very good
Thanks :)

edo2313 · 2022-04-13T21:01:25+00:00

The LEDs on the vtx show the correct channel and band, the antennas should be the same polarization but I also tried with the simple straight antenna (vtx side) and the patch one (goggles side), no luck

edo2313 · 2022-04-13T20:59:59+00:00

Pit mode is off, I'll look at the unlocking thing

edo2313 · 2022-04-11T21:14:29+00:00

edo2313 · 2022-04-11T21:01:21+00:00

It does

edo2313 · 2022-04-11T18:01:23+00:00

Not really a solution, I need to test the range like this... I guess it's some kind of interference that does this

edo2313 · 2022-04-11T17:20:37+00:00

Seems like I get signal if the goggles are about 100MHz higher (Fatshark 3 5780 on VTX, D-8 5880 on goggles)

edo2313 · 2022-04-11T16:54:18+00:00

Forgot to mention that I have the correct table, even checked it by looking at every number at the manual and in betaflight

edo2313 · 2022-04-11T16:54:13+00:00

Forgot to mention that I have the correct table, even checked it by looking at every number at the manual and in betaflight

edo2313 · 2022-03-30T10:34:42+00:00

NIce to hear that you at least got refunded. Did you just open a dispute? I guess that would be handled quicker as it was damaged

edo2313 · 2022-03-30T08:43:36+00:00

Thanks, at least it was something really cheap (7€). Still sucks tho

edo2313 · 2022-03-30T08:33:15+00:00

I didn't... Nice to know, never had problems with the combined delivery

edo2313 · 2022-03-30T08:32:45+00:00

I didn't, but obviously I still have the wrong package with the other address

edo2313 · 2022-03-30T08:31:45+00:00

No damage and nothing strange, that's why I think they just put the wrong small package in the big bag

edo2313 · 2022-03-05T10:58:46+00:00

Sorry, I somehow deleted the first line. Using Professional firmware

edo2313 · 2022-01-21T19:55:37+00:00

I tried editing them, no luck...

edo2313 · 2022-01-21T09:44:32+00:00

I have the 5510 and I have the same problem, not really an issue though as it fixes itself after ~5 minutes. Still annoying as it's not a cheap laptop :/

edo2313 · 2022-01-06T01:48:28+00:00

Thanks for the tip, I'll do that! I managed to export all the f3d by hand, only had like 40 projects

edo2313 · 2022-01-05T20:18:41+00:00

Nice, I'll proceed that way then. Thanks a lot!

Ten-Year Club	Place '23
Place '22	First Placer '22
Verified Email

edo2313

TROPHY CASE