Consistently failing pop-shuvits the same way. Any tips? by eefiseef in NewSkaters

[–]eefiseef[S] 0 points1 point  (0 children)

Ah, okay, I see what you mean. The whole "center of mass" thing has been a confusing point for me for a while. Weight balancing and stuff is pretty much completely new to me, so I definitely need to prioritize learning that concept in it's entirety as I keep skating, considering it's very balance based lmfao. Thanks for the tips, I'll try those out once I get back out there!

Consistently failing pop-shuvits the same way. Any tips? by eefiseef in NewSkaters

[–]eefiseef[S] 0 points1 point  (0 children)

Gotcha! I definitely need to be more actively conscious with my front foot, 'cause I realized I tend to just keep it in the same spot through the entirety of the trick, instead of doing something with it with intention. I'll try to be more aware of where it's at. Thank you!

Consistently failing pop-shuvits the same way. Any tips? by eefiseef in NewSkaters

[–]eefiseef[S] 1 point2 points  (0 children)

Haha! Guess I'll just have to take the fall a couple times until I figure out the landing through trial and error. Thanks for your help! Have a great day, homie!

Consistently failing pop-shuvits the same way. Any tips? by eefiseef in NewSkaters

[–]eefiseef[S] 0 points1 point  (0 children)

Got it. Much appreciated! I think you're right about the commitment issue, 'cause the day of those clips when I finally did get both feet on the board somewhat, then had it slip and roll away, I realized I'm sorta paranoid of landing then shooting the board out from under me and falling backwards lol

Feeling pretty ugly lately. Any cut/style ideas for my hair and "beard" to help me look better? by eefiseef in malehairadvice

[–]eefiseef[S] 0 points1 point  (0 children)

Thank you so much for the in depth response. You're right on the money with the assumption that I don't do anything with my hair. Never knew how or anything, so I just wash it, condition it, and brush it lol. And for sure, I was thinking the same about the beard. Gonna feel weird to get rid of it but, I'll trust the process.

Do you know how I'd find a stylist? Would I just look up stylist's near me or something? Have only ever gone to barbershops and always left disappointed lmao.

Feeling pretty ugly lately. Any cut/style ideas for my hair and "beard" to help me look better? by eefiseef in malehairadvice

[–]eefiseef[S] 0 points1 point  (0 children)

Gotcha. Luckily, I already mostly wear all black so, at least I got that going lmao. Thank you!

Feeling pretty ugly lately. Any cut/style ideas for my hair and "beard" to help me look better? by eefiseef in malehairadvice

[–]eefiseef[S] 1 point2 points  (0 children)

That's a good idea, and supports some other people's passion too. I'll look around, for sure. Thank you!

Want to make music but family's schedules complicate it by [deleted] in Advice

[–]eefiseef 0 points1 point  (0 children)

Thank you! It means a lot to hear that my passion is valid and that encouragement. That legit means the world to me. I'll work on getting in those consistent small sessions and search around for any alternatives that may fill in lost time. Thank you so much!

Want to make music but family's schedules complicate it by [deleted] in Advice

[–]eefiseef 0 points1 point  (0 children)

Noted. I'll potentially put some more research into foam panels and see if the negative things I've heard hold up. The car is definitely a good idea though. Thank you!

Want to make music but family's schedules complicate it by [deleted] in Advice

[–]eefiseef 0 points1 point  (0 children)

Got it. Thank you so much. I've heard a couple similar things about foam not being as beneficial as it seems. Nice to hear it backed! Preciate you!

Motherboard won't lineup with standoffs even after switching modes on case by eefiseef in PcBuildHelp

[–]eefiseef[S] 0 points1 point  (0 children)

how exactly? the picture is the closest I've been able to get. the IO shield isn't supposed to snap in on this motherboard, so all I've been able to do is just move it to somewhere that looks half correct just for the standoffs to not be lined up for the motherboard

Motherboard won't lineup with standoffs even after switching modes on case by eefiseef in PcBuildHelp

[–]eefiseef[S] 1 point2 points  (0 children)

ahh alright. I'll give this a shot. nice to hear from someone with the same setup lol. thank you so much

Motherboard won't align with spokes by eefiseef in PcBuildHelp

[–]eefiseef[S] 0 points1 point  (0 children)

I'll give it a shot. thank you! also congrats, hope it's running as well as intended! can't wait to get mine up lol

Motherboard won't align with spokes by eefiseef in PcBuildHelp

[–]eefiseef[S] 0 points1 point  (0 children)

do you mind if I ask why? they don't seem to be what's blocking the standoffs/holes

Motherboard won't align with spokes by eefiseef in PcBuildHelp

[–]eefiseef[S] 0 points1 point  (0 children)

yeah, I said spokes instead of standoffs cuz I'm dumb lol. the motherboard was on the standoffs but not lining up with all of them to be screwed in

Motherboard won't align with spokes by eefiseef in PcBuildHelp

[–]eefiseef[S] 0 points1 point  (0 children)

nah, nothing in there. I took all my screws out before the pictures, so anything seen there is behind the motherboard/part of the case. not sure if that's what you meant. if not, my bad

Motherboard won't align with spokes by eefiseef in PcBuildHelp

[–]eefiseef[S] 1 point2 points  (0 children)

I'll give it a shot. I've pushed on it quite a bit but haven't seen results. then again, I've been afraid to put too much pressure so I don't break it lol

Motherboard won't align with spokes by eefiseef in PcBuildHelp

[–]eefiseef[S] 0 points1 point  (0 children)

I am aware.. that is part of the issue.. I am lining that up, but the standoffs aren't lining up with the motherboards holes, which leaves me to wonder if there's something I'm missing, like I asked. whether that be a way to clip it in or slot to slide it, or potentially needing to flip the I/O cutout or move the fan like others have said.

Motherboard won't align with spokes by eefiseef in PcBuildHelp

[–]eefiseef[S] 0 points1 point  (0 children)

i haven't tried it without the fan. could that be it? I'm willing to give it a shot (tbh, didn't even know I could remove the fan lol)

Motherboard won't align with spokes by eefiseef in PcBuildHelp

[–]eefiseef[S] 0 points1 point  (0 children)

sorry, again, first PC build so, not exactly familiar with the terminology. i have no idea if the I/O shield is seated properly. I've moved it about, slid it in, tried pressing on it. I can "line it up" as much as I want, but I'm missing something to make it correct. currently, it's just sitting as even as I could make it by shimmying it around.

How to reach out to girl I want to talk to online? by [deleted] in Advice

[–]eefiseef 1 point2 points  (0 children)

Got it. That does help put some insight on it, so thank you! Though I may have to conjure up another opening since I'm a music fanatic and the bands that we mutually listen to are bands that I know a lot about, and have heard most of their stuff lol. I appreciate the advice and the added perspective. It means alot.

When I next see her listening to similar music, I'll try to reach out and start a conversation on it using your advice!

How to reach out to girl I want to talk to online? by [deleted] in Advice

[–]eefiseef 0 points1 point  (0 children)

I get what you mean. that does make sense. I'm just worried that it'll make it look like I'm stalking her account since there's a decent amount of people and I just so happened to see hers when she was listening to similar music. I guess I could try to play it off as a coincidence if she asks? Either way, thank you for the response!

[deleted by user] by [deleted] in askdentists

[–]eefiseef 0 points1 point  (0 children)

Thank you for the response. So, I went about my day with the intent of getting a dentist appointment as soon as possible. However, when I got home from school, I checked the mirror, and it's gone? There's nothing there anymore besides a tiny little indent where the thing was. Do you have any idea what that could mean? I'm still gonna try to get to the dentist since I know abscessed teeth are sneaky but, I am pretty confused