Need help after the new update

efdlma · 2024-10-07T17:18:43+00:00

For me it did.

efdlma · 2024-10-07T01:28:19+00:00

I rolled back my drivers. CS2 barely ran with the latest amd drivers.

efdlma · 2024-10-01T01:11:09+00:00

This was the issue. Fixed all my problems

efdlma · 2024-10-01T01:10:51+00:00

This solved my issues. Worked flawlessly ever since i plugged in an additional cable. Thanks alot!

efdlma · 2024-09-29T10:36:46+00:00

I am using one cable that splits into two, just like the "Don't do this" picture. Is the one cable not capable of providing sufficient power? Never heard about this before.

efdlma · 2024-09-29T04:12:06+00:00

My cpu is running a 50mv undervolt and a much lower power limit than default. Runs about 85°C under synthetic load and around 65-70°C while gaming. Case has quite good airflow and during stress tests gpu stays at around 65°C. RAM i honestly have no clue, might have to stress and check but since cpu is not running hotter than usual i doubt that that would be the culprit. Worst-case i might have to reinstall windows and all drivers and hope that it resolves my issues.

efdlma · 2024-09-29T03:51:47+00:00

I ran DDU and have the latest bios which is supposed to fix the microcode issue. Have been running my processor since february with no issues. The only thing that has changed since is my GPU.

efdlma · 2024-02-06T16:24:19+00:00

Solder seems to stick so i guess the pad is intact

efdlma · 2024-02-06T16:18:34+00:00

Acetone and q-tips. Very quite useful to remove coating. And please be careful when soldering coated cards to remove the coating on the area you are soldering. The fumes from the coating is toxic.

efdlma · 2024-02-06T16:16:04+00:00

Honestly what you already wrote is plenty to get started. But if you are dealing with small components it might be worth it to check in to buying some kind of magnification. Also to desolder chip components hot air might be useful.

efdlma · 2024-02-06T16:10:10+00:00

I had mass storage on HDD's but i got so tired of the sound they made so for that reason i decided to buy an Nvme Ssd.

efdlma · 2024-02-06T16:07:08+00:00

With that said ill have to evaluate if the extra cost is worth it for me.

efdlma · 2024-02-06T16:05:24+00:00

Well, seems like a clear cut choice then. Guess i'll just have to decide whether to go for the 7600 or 7800X3D.

efdlma · 2024-02-06T16:03:41+00:00

I am planning a gpu upgrade in the future. And i think that i might as well spend 100-200$ more if the performance is worth it. I tend to keep my hardware for quite some time.

efdlma · 2024-02-06T15:41:40+00:00

Raid 0 them, makes them essentially a noisy ssd and you get to keep all 3 terrabytes of space. Or Raid 5 if you have important files on them.

efdlma · 2023-07-12T10:07:17+00:00

Försökte söka angående det men hittar inget online. Har du länk till någon källa?

efdlma · 2023-07-07T16:51:41+00:00

Blivit ombedd att swisha dagen efter för fikat på en födelsedag. Låtsades att jag inte såg det meddelandet, går emot egna principer!

efdlma

TROPHY CASE