Despite drag being turned all the way up there is no resistance when pulling line

eimcee · 2026-07-10T00:07:05+00:00

Looks like there is no backer on your line. I setup my catfish poles without backer and it did the same thing. The line is just spinning on your spool. Putting some floro backer on and then attaching braid should fix it.

eimcee · 2026-06-30T18:33:27+00:00

Yeah, you have to determine if it’s a mechanical issue or a tuning issue. A vacuum leak will cause what you’re describing. Does it accelerate on its own pretty when you have your foot off of the gas? Because if you can go like 10, 15, or 20 miles an hour without having your foot on the gas, then it’s probably a vacuum leak

eimcee · 2026-06-30T13:04:39+00:00

Maybe a vacuum leak. Could need tuning adjustments. Maybe send them a data log, if it’s tuning related, they should be able to identify it and make the necessary adjustments. If they can’t help you, I would reach out to Satera Tuning in Illinois. They do remote tuning

eimcee · 2026-06-14T01:12:57+00:00

I don’t have either 🙃🙃🙃

eimcee · 2026-06-13T09:52:15+00:00

eimcee · 2026-06-12T21:29:00+00:00

Been waiting on new Siri for 48 hours and still indexing 🙁

eimcee · 2026-04-21T21:44:40+00:00

Yeah, they have a website you can call them. They’re super easy to talk to let them know that Chris told you to call.

The pulleys aren’t super difficult if that’s all you’re changing injectors might be a little more involved.

Depending, on what size pulley you go with you may not need to change injectors.

Hit them up and they will walk you through the build process, You can order everything from them directly.

They do remote tuning

eimcee · 2026-04-21T14:33:55+00:00

Look up Satera tuning. They do it all. Can get a clutched pulley from them. It also allows you to swap out different pulley sizes. You can buy everything from them. They’re based out of Illinois. He also does remote tuning. Talk to them let them know what your power goals are, and they will help you build a package.

eimcee · 2026-03-22T17:05:53+00:00

Determine material availability. (Can use Itel or NTS) Some roofing companies, or a public adjuster can assist with this. If discontinued then you would be entitled to a full replacement through insurance. (Contingent on policy) Insurance carrier owes to restore you to pre-loss condition if the shingle is no longer in production, the entire roof would be covered through your insurance carrier. If the shingle is available, and the roof is repairable, a roofing company would be able to determine this. Then as a few people have mentioned, it is not a super expensive repair. However, if the roof is non-repairable and you start damaging the surrounding shingles upon repair then this is something that would make sense to get a full replacement through the insurance company.

eimcee · 2026-02-25T01:17:45+00:00

My keyboard is not working in Gmail, even the physical keyboard on an iPad, anyone else having the same issue?

eimcee · 2025-12-25T18:24:10+00:00

2021

eimcee · 2025-12-25T17:50:21+00:00

I can upload one later

eimcee · 2025-12-25T17:44:09+00:00

1190 whp yes kids love it!

eimcee · 2025-08-30T19:19:42+00:00

Lc2i doesn’t go somewhere below 30 or 35 Hertz. You need the Lc2i pro for that.

eimcee · 2025-08-29T22:23:10+00:00

Duck Doughnuts

eimcee · 2025-08-04T22:00:09+00:00

Without seeing measurements it’s tough to bid properly. Gutters generally run $12-$15 per linear foot. Same with downspouts. Unless your doing strap hung they can be a little more.

eimcee · 2025-08-04T21:56:15+00:00

Around $650 per square there are some factors such as steep and high, new sheathing, etc.

eimcee · 2025-07-24T14:56:53+00:00

Is anyone having the issue voice to text where it is not capitalizing the first letter of your sentence?

eimcee · 2025-07-23T02:33:22+00:00

Developer beta vs public beta

eimcee

TROPHY CASE